InLine 40150 Smart Home Alarm Siren Installation Guide
- June 14, 2024
- inLine
Table of Contents
- InLine 40150 Smart Home Alarm Siren
- GENERAL INFORMATION
- CONTENT OF DELIVERY
- EXPLANATION OF WARNING SYMBOLS AND NOTES
- TECHNICAL CHARACTERISTICS
- OPERATING THE INLINE SMART HOME ALARM SIREN
- ADD/CONNECT DEVICE
- DEVICE CONFIGURATION
- DEVICE DATA
- TROUBLESHOOTING
- CONTACT
- DISPOSAL
- DISCLAIMER
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
InLine 40150 Smart Home Alarm Siren
GENERAL INFORMATION
VALIDITY
This user manual applies to the following products: 40150 InLine® Smart Home
alarm siren
MANUFACTURER:
- INTOS ELECTRONIC AG
- Siemensstraße 11
- D-35394 Gießen
DATE:
January 2019
CONTENT OF DELIVERY
- 1 x InLine® Smart Home alarm siren
- 1 x Micro USB cable, appr. 100cm long
- 1 x User manual GE+EN
Please check the content of the delivery for completeness. If individual components are missing, please contact your dealer.
EXPLANATION OF WARNING SYMBOLS AND NOTES
TIP!
This symbol highlights optional products we recommend for the purpose
described in the respective chapter.
TECHNICAL CHARACTERISTICS
- Colour: White
- Material: ABS+PC plastic
- Standby: 10µA
- Signal: WiFi 2.4GHz
- Protocol: IEEE802.11b/g/n
- Range: Up to 45m (in visual contact)
- Siren: 110dB
- Power consumption: 65mA
- Operating temperature: 0°-40°C
- Operating humidity: 20%-85%
- Storage temperature: 0°-60°C
- Storage humidity: 0%-90%
- Weight: 110g
- Dimensions DxH: 68x33mm
- Connection: Micro USB 1m cable
- Batteries: 2xCR123A (optional)
- App: Smart Life
- Compatible with: Amazon Alexa, Google Assistant, IFTTT
OPERATING THE INLINE SMART HOME ALARM SIREN
POWER SUPPLY
- Connect the Micro USB plug to the Micro USB port of the siren provided for this purpose.
- Connect the USB-A plug to a USB power source.
- Plug the power adapter into a designated power outlet. (not included)
- Alternatively, the siren can also be operated with 2 batteries (CR123A 3V). Please pay attention to the durability indication of the battery!
If you create an automation in the app (under the Smart section), the siren will be activated as soon as the battery status is low.
APP DOWNLOAD
Android
Download the Smart Life APP from the Google Play Store and launch the app.
iOS
Download the APP „Smart Life“ from the APP Store and start the app.
REGISTER AND LOGIN THE APP
- Open the Smart Life app on your phone.
- Register with your mobile phone number or email address.
- Select your router and confi rm the WLAN password if necessary.
- This connects the app to your network.
ADD/CONNECT DEVICE
- Press „+“ sign (top right) or „Add device“ (in the middle of the screen). (Image 1)
- Select your device from the displayed list. (Image 2) Click „Sensor WiFi“ from the „Security & Sensor“ section for this alarm siren. (Image 2)
- To connect, press the product reset button for 6 seconds until the LED starts flashing rapidly. If so, confirm by pressing the „Next step“ box in the app. (Image 3)
- Select your router and enter your Wi-Fi password. „Confirm“ so that the device can connect to your network. (Image 4)
- The app now connects to the device, wait until the display on your smartphone confirms that. (Image 5)
- You can assign your connected device directly to a room, but you don‘t have to. (Image 6) The device then appears in the device overview under „All devices“.
- In principle, settings/scenarios/automation for several families can be stored in this app. The administrator has permission to create families and to access all families.
DEVICE CONFIGURATION
Select the device from your connected devices to be set by clicking on it in the list. (Image 7) The fi rst view shows the status of the device. (Image 8)
DEVICE DATA
Pencil top right (Image 8)
These terms or assignments (Image 9) make it easier for you to create automatisms or scenarios, such as Device Name / Device Location / Network Check / Voice Control / Share Device / Create Group / Device Information / Feedback / Add to Home Screen / Check Firmware Upgrade / Remove the device / restore factory settings.
TROUBLESHOOTING
PROBLEM/SOLUTION
- WiFi device does not turn on: Make sure that the power supply is connected or that the battery of the WiFi device is not empty.
- No WiFi connection is possible: Make sure that the router and the device to be connected are turned on. Check the available WiFi standard of the device. The InLine® Smart Home product supports WiFi 2.4GHz / IEEE802.11b/g/n.
- The network is found but no connection is possible: Make sure that you have entered your WLAN password correctly. Check whether you have selected the correct device from the selection list. (For the siren, please select the „Sensor WiFi“ in the list of „Security & Sensor“).
CONTACT
If you have any questions about the product or if you have any problems, you can contact the manufacturer directly via live.inline-info.com or via email at service@inline-info.de.
DISPOSAL
Electrical and electronic equipment and batteries must not be disposed of with household waste. The consumer is obliged by law to return electrical and electronic equipment and batteries at the end of their service life to the designated public collection points or to the point of sale. Dispose of the packaging material sorted by type.
DISCLAIMER
EDITION ENGLISH 3/2019
Documentation © 2019 INTOS ELECTRONIC AG All rights reserved. No part of this
manual may be reproduced in any form or duplicated or processed using
electronic, mechanical or chemical processes without the publisher´s written
consent. This manual may still contain typographical defects or printing
errors. However, the information in this manual is reviewed regularly and
corrections will be made in the next edition. We accept no liability for
technical or typographical errors and their consequences. All trademarks and
industrial property rights are acknowledged. Changes in the sense of technical
progress can be made without prior notice. Our products, including packaging,
are not toys; they may contain small parts and sharp objects. Keep away from
children, please.
INTOS ELECTRONIC AG
Siemensstrasse 11, D-35394 Giessen www.inline-info.com
For detailed descriptions of this product, please refer to our operating instructions, downloaded at: www.inline-info.com/smarthome
References
- live.inline-info.com
- IT- und Multimedia - Accessoires von InLine |Der Kabel-Spezialist
- Smart Home von InLine®: einstiegsfreundlich & individuell