SKYDANCE TW Series Wall Mounted Touch Panel User Manual

SKYDANCE TW Series Wall Mounted Touch Panel

Product Information

The Wall Mounted Touch Panel is available in four models: TW1, TW2, TW4, and TW5. Each model has different features and functionalities:

• TW1: 1 Zone Dimming
• TW2: 1 Zone CCT
• TW4: 1 Zone RGB/RGBW
• TW5: 1 Zone RGB+CCT

The touch panel is designed with a high strength glass surface and a touch color wheel in the middle. It has touch keys with LED indicators for easy operation. The touch panel can remotely control multiple RF 2.4G LED controllers. It operates on a CR2032 battery, allowing for free installation without the need for wiring. The touch panel is available in both white and black colors.

Technical Parameters

• Input and Output: RF (2.4GHz)
• Output signal: 3VDC (CR2032)
• Working voltage: Not specified
• Working current: Not specified
• Standby current: Not specified
• Standby time: Not specified
• Remote distance: Up to 30 meters

Product Usage Instructions

To use the Wall Mounted Touch Panel, follow these steps:

1. Choose the appropriate touch panel model based on your lighting needs (TW1, TW2, TW4, or TW5).
2. Select the desired color or color temperature using the touch color wheel in the middle of the touch panel. The LED indicators on the touch keys will provide visual feedback.
3. Ensure that the touch panel is within the wireless remote distance of the RF 2.4G LED controllers (up to 30 meters).
4. Insert a CR2032 battery into the touch panel for power.
5. Mount the touch panel on a wall using the provided installation instructions. Alternatively, if you prefer a removable setup, follow the instructions for a free installation without wiring.
6. Enjoy controlling your LED lighting system with the Wall Mounted Touch Panel!

Wall-Mounted Touch Panel

Model No.: TW1, TW2, TW4, TW5

1-5 color/Glass touch panel/Touch color wheel/Wireless remote 30m distance/CR2032 battery

Features

• Touch panel 1-5 color RF remote.
• Each Touch panel can remote control multiple RF 2.4G LED controllers.
• Ultra sensitive high strength glass touch panel with touch color wheel in the middle.
• Touch keys with LED indicator.
• Free installation, no wiring, removable.
• CR2032 battery powered.
• White & Black available.

Technical Parameters

Input and Output

Output signal| RF(2.4GHz)
Working voltage| 3VDC(CR2032)
Working current| <8mA
Standby current| <16μA
Standby time| 1 year
Remote distance| 30m (Barrier-free space)

Safety and EMC

EMC standard (EMC)

| ETSI EN 301 489-1 V2.2.3

ETSI EN 301 489-17 V3.2.4

---|---
Safety standard(LVD)| EN 62368-1:2020+A11:2020
Radio Equipment(RED)| ETSI EN 300 328 V2.2.2
Certi cation| CE,EMC,LVD,RED
Warranty| 5 years
Environment

Operation temperature| Ta: -30 OC ~ +55 OC
Case temperature (Max.)| Tc: +65 OC
IP rating| IP20
Package|
Size| L100x W92 x H16.5mm
Gross weight| 0.137kg

Mechanical Structures and Installations

To fix the panel, two options are offered for selection:
Option 1: fix it on the wall with two screws.
Option 2: adhere it to the wall with paster

Note: If the LED indicator is not on when press key, it is due to dead battery or bad contact caused by multiple plugging, please replace the battery, or raise the battery shrapnel with a screwdriver

Installation diagram

Match with RF LED controller (two match ways)

End user can choose the suitable match/delete ways. Two options are offered for selection:

Use the controller’s Match key

Match:
Short press match key, immediately press on/off key on the touch panel. The LED indicator fast flash a few times means match is successful.

Delete:
Press and hold match key for 5s to delete all match.
The LED indicator fast flash a few times means all matched remotes were deleted.

Use Power Restart

Match:
Switch off the power, then switch on power, repeat again. Immediately short press on/off key 3 times on the touch panel. The light blinks 3 times means match is successful.

Delete:
Switch off the power, then switch on power, repeat again. Immediately short press on/off key 5 times on the touch panel. The light blinks 5 times means all matched remotes were deleted.

Key Function

TW1 Single color panel

TW2 Dual color panel

TW4 RGB/RGBW panel

TW5 RGB+CCT panel

Scene locking:

• Scene keys can be set to locked state, cancel long press for 5 seconds to save the scene function (default scene is not locked).
• Short press the panel on/off key, turn on the light first, then turn off the light, immediately long press the panel on/off key for 5 seconds, then immediately long press any one scene key for 5 seconds to set all scene keys to locked state.
• Short press the panel on/off key, turn on the light first, then turn off the light, immediately long press the panel on/off key for 5 seconds, then immediately long press any one scene key for 10 seconds to restore all scene keys to unlocked state.

Safety information

1. Read all instructions carefully before you begin this installation.

2. When installing battery, pay attention to the battery positive and negative polarity. A long time without the remote control, remove the battery.
   When remote distance becomes smaller and insensitive, replace the battery.

3. If no response from the receiver, please re-match the remote.

4. Gently handle remote, beware of falling.

5. For indoor and dry location use only.

FCC

15.19 Labeling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

15.21 Information to user.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

15.105 Information to the user.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC RF Radiation Exposure Statement:

1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
2. This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>