eufy SECURITY S340 Wireless Outdoor Security Camera User Guide

eufy SECURITY S340 Wireless Outdoor Security Camera

Product Information

Product Usage Instructions

Charging Your Camera
Fully charge the camera before first use.

Setting Up the System

1. Download and install the eufy Security app, then sign in or create an account.
2. Follow the in-app instructions to add the camera to the device list.

Mounting Your Camera
Select a location and height for mounting the camera.

To avoid potential blind spots, do not install the camera directly facing the monitoring area. Maintain an angle to ensure no detection is missed.

Selecting a Solar Panel Location

Option 1: Mount the Camera and the Solar Panel Separately (Best for Strong Solar Power)

1. Drill holes with a 15/64 inch (5.95 mm) drill bit using the provided positioning card, then insert the anchors into the holes.
2. Connect the solar panel to the camera using the provided USB-C extension cable.
3. Firmly secure the camera onto the mounting bracket.
4. Install the mounting bracket of the solar panel in a suitable position.

Option 2: Mount the Camera with the Solar Panel Attached (Less Drilling)

1. Secure the solar panel’s mounting bracket to the top of the camera.
2. Install the solar panel onto the solar panel’s mounting bracket by turning it.
3. Connect the USB-C connector to the USB-C port of the solar panel.
4. Drill holes with a 15/64 inch (5.95 mm) drill bit using the included positioning card, then insert the anchors into the holes.

Safety Instructions

BAIL!
There is a risk of explosion if an incorrect battery type is used. Dispose of used batteries according to their instructions.

Warning:
This product complies with the radio interference requirements of the United Kingdom. Anker Innovations Limited declares that this product is in compliance with Radio Equipment Regulations 2017(SI2017/1206).

The full text of the UK declaration of conformity is available at the following internet address: https://uk.eufylife.com.

Anker Technology (UK) Limited I GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom.

AT A GLANCE

1. LED Indicator
2. Speaker
3. Telephoto Lens
4. Photosensitive Sensor
5. PIR Sensor
6. Microphone
7. Wide-Angle Lens
8. LED Light
9. Solar Panel Mounting Hole
10. Mounting Hook
11. USB-C Charging Port
12. SYNC Button

CHARGING YOUR CAMERA

Fully charge before first use.

SETTING UP THE SYSTEM

1. Download and install the eufy Security app, then sign in or create an account.
2. Follow the in-app instructions to add the camera to the device list.

MOUNTING YOUR CAMERA

Select a Location and a Height
Select a location where you can get the desired view. We recommend hanging the camera 7-10 ft (2-3 m) above the ground.

To ensure that no detection is missed, do not install the camera directly facing the monitoring area. Instead, maintain an angle to avoid any potential blind spots.

Select a Solar Panel Location

Option 1: Mount the Camera and the Solar Panel Separately (Best for Strong Solar Power)
If the camera is blocked, install the solar panel independently and use the provided USB-C extension cable to get strong solar power. The camera can be mounted on a wall or on the ceiling.

1. Drill holes with a 15/64 inch (5.95 mm) drill bit with the provided positioning card, then insert the anchors into the holes.
2. Connect the solar panel to the camera using the provided USB-C extension cable.
3. Firmly secure the camera onto the mounting bracket.
4. Install the mounting bracket of the solar panel in a suitable position.
5. Install the solar panel onto its mounting bracket by turning it, then adjust the angle (20º~30º recommended).

Option 2: Mount the Camera with the Solar Panel Attached (Less Drilling)
If the camera is not blocked, install the solar panel directly on the top of the camera.

1. Secure the solar panel’s mounting bracket to the top of the camera.
2. Install the solar panel onto the solar panel’s mounting bracket by turning it.
3. Connect the USB-C connector to the USB-C port of the solar panel.
4. Drill holes with a 15/64 inch (5.95 mm) drill bit with the included positioning card, then insert the anchors into the holes.
5. Firmly secure the camera onto the mounting bracket and adjust the angle (20º~30º recommended).

SAFETY

• The suitable temperature for this device and accessories is -20°C to 50°C (Charging temperature is 0°C to 40°C).
• Unless specifically indicated that it is safe to do so in the user guide or instruction manual, do not use this device in an environment that exceeds the recommended low or high temperature.
• Unless specifically indicated that it is safe to do so in the user guide or instruction manual, avoid exposing your device to direct sunshine or excessively wet environments.
• It is recommended to supply the device in an environment with a temperature that ranges from 5°C to 25°C.
• When supplying power, place the device in an environment that has a normal room temperature and good ventilation.

CAUTION!
THERE IS A RISK OF EXPLOSION IF AN INCORRECT BATTERY TYPE IS USED. DISPOSE OF USED BATTERIES ACCORDING TO THEIR INSTRUCTIONS.

Warning:

• Replacing a battery with an incorrect type may bypass safeguards and create danger;
• Disposal of a battery in a fire or other source of significant heat, or by crushing, or cutting, may result in an explosion as well as leakage of flammable liquids and gases;
• Leaving a battery in an extremely hot environment may result in an explosion as well as leakage of flammable liquids and gases;
• A battery subjected to extremely low air pressure may result in an explosion as well as leakage of flammable liquids and gases.

NOTICE

Declaration of Conformity

This product complies with the radio interference requirements of the European Community.

Hereby, Anker Innovations Limited declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. For the declaration of conformity, visit the Web site: https://uk.eufylife.com/.

RF exposure information:
The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 cm between the device and the human body. To maintain compliance with RF exposure requirements, use products that maintain a 20cm distance between the device and human body.

• Wi-Fi Operating Frequency Range: 2412~2472MHz; Wi-Fi Max Output Power: 18.47 dBm
• The following importer is the responsible party (contact for EU matters only)
• Anker Innovations Deutschland GmbH I Georg-Muche-Strasse 3, 80807 Munich, Germany.

This product complies with the radio interference requirements of the United Kingdom.

Hereby, Anker Innovations Limited declares that this product is in compliance with Radio Equipment Regulations 2017(SI2017/1206). The full text of the UK declaration of conformity is available at the following internet address: https://uk.eufylife.com. Anker Technology (UK) Limited I GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom.

• Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.
• This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment.
• For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.

CUSTOMER SERVICE

12-month limited warranty

• (US) +1 800-988-7973

• (UK) +44 (0) 1604 936200

• support@eufy.com

• Anker Innovations Limited
  Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong.

• @EufyOfficial

• @EufyOfficial

• @EufyOfficial

References

• eufy | Built with Care | eufy UK
• eufy - Built with Care | Home Security System & Robovacs | eufy UK
• eufy - Built with Care | Home Security System & Robovacs | eufy UK
• eufy - Built with Care | Home Security System & Robovacs | eufy UK

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>