Eufy Security Alarm Kit User Manual
- June 7, 2024
- eufy SECURITY
Table of Contents
User Manual
eufy Security Alarm Kit
HOW THE SYSTEM WORKS
eufy Security Ecosystem
The eufy Security ecosystem includes a series of integrated devices, such
as HomeBase, eufyCam, entry sensor, motion sensor, and Keypad. When these
devices are connected to the HomeBase via the eufy Security app, the Homebase
will monitor all the devices in your house to see if there are any issues.
Once faults are detected, the HomeBase will set off an alarm or send
notifications to alert users.
With HomeBase at the core of the network, each connected device complies with
the security rules that are set in the eufy Security app for a given scenario.
The eufy Security ecosystem allows for automation among all of your devices.
The following picture shows the eufy Security ecosystem.
ADDING YOUR DEVICES TO THE SYSTEM
Download the eufy Security App
-
Download the eufy Security app from the App Store (iOS devices) or Google Play (Android devices).
-
Sign up a eufy Security account.
Add HomeBase to the System
-
Power on the HomeBase, and then use the ethernet cable provided to connect HomeBase to your home router. The HomeBase can also be connected via Wi-Fi through the eufy Security app.
-
The LED indicator will turn blue (this may take up to 1 minute) when HomeBase is ready for setup.
-
Follow the on-screen instructions to add Homebase to the system and to complete the setup.
Add Other Devices
Follow the instructions in the Entry Sensor / Motion Sensor / Keypad User
Manual to add each device to your system.
KEY FEATURES
Security Mode
On the eufy Security app, go to the Security page to set your security modes:
Away, Home, and CUS. In each security mode, the device list displays all
devices connected to the same HomeBase.You could customize whether the
HomeBase rings an alarm or sends you alarm alert notifications when the device
is triggered.
Away mode: All sensors are activated and your house will be monitored. The system is armed and operational. Any human or entry will be detected and an alarm will be triggered. Recommended using when you are away from home. Home mode: Interior sensors are disabled, while exterior sensors are activated. Recommended using when you are at home and want to be alerted about any potential break-ins outside the house.
Customized mode: Recommended if you feel a customized security mode is needed
to match your specific life requirements. Disarmed mode: All detection
functions are disabled. No sensors are activated and no alarm alerts will be
sent. Recommended using when you are experiencing issues with your devices.
The rules of this mode can be edited. The Away, Home, and CUS modes can be
edited. You can choose to push notifications or send alarm alerts on the eufy
Security app.
Note: You can set a leaving delay and alarm delay in each mode.
-
Leaving Delay
If you activate a security mode with an alarm action and you have to pass by a triggered device before leaving your house, you can set a delay time. The delay allows you to leave home without triggering any alarm. You should leave the house before the countdown ends.
By default, the leaving delay is disabled in each security mode. When you need to set leaving delay for a certain mode, you can select the device that needs the delay and determine a countdown from 0s to 300s. -
Alarm Delay
If you have activated a security mode that has a Homebase alarm action you can set a delay time before the alarm will sound.The alarm delay feature leaves you enough time to enter the house and switch the security mode on the Keypad before the alarm sounds.
By default, the alarm will sound immediately once any device is triggered. If you need to set alarm delay for a certain device, select the device that requires the delay, and set a time from 0s to 300s.
AUTOMATION
The Automation feature allows a device that is set as a trigger to activate
other devices which are connected to the same HomeBase. For example, you can
set the motion sensor as a trigger and specify the eufyCam action. Once the
motion sensor detects movement, the eufyCam will start recording video.
You can create your own automation on the eufy Security app.
Open the eufy Security app homepage.
Tap the “Security” tab. Tap the “Automation” tab. Choose a trigger and add an
action as you desire. The automation will be activated automatically according
to the settings you create.
NOTICE
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: (1) Reorient or
relocate the receiving antenna. (2) Increase the separation between the
equipment and receiver. (3) Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected. (4) Consult the dealer
or an experienced radio/ TV technician for help.
FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The
device can be used in fixed/mobile exposure condition.The min separation
distance is 20cm.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables
to maintain compliance with FCC regulations.
The following importer is the responsible party:
Company Name: POWER MOBILE LIFE, LLC
Address: 400 108th Ave NE Ste 400, Bellevue,WA 98004-5541
Telephone: 1-800-988-7973
This product complies with the radio interference requirements of the European
Community.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this device is in compliance
with the essential requirements and other relevant provisions of Directive
2014/53/EU. For the declaration of conformity, visit
www.eufylife.com.
Do not use the Device in the environment at too high or too low temperature,
never expose the Device under strong sunshine or too wet environment.
RF exposure information: The Maximum Permissible Exposure (MPE) level has been
calculated based on a distance of d=20 cm between the device and the human
body. To maintain compliance with RF exposure requirement, use product that
maintain a 20cm distance between the device and the human body.
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE
OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
Wi-Fi Operating Frequency Range:2412~2472MHz for EU;
Wi-Fi Max Output Power: 17.13 dBm
SUB-1G Frequency range: 866~866.8 MHz;
SUB-1G Output Power:5.492 dBm(ERIP)
The following importer is the responsible party (contact for EU matters only)
Importer: Anker Technology (UK) Ltd
Importer Address: Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham
B11 2AA, United Kingdom
This product is designed and manufactured with high quality materials and components, which can be recycled and reused.
This symbol means the product must not be discarded as household waste and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health, and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.
IC Statement
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may
cause undesired operation of the device.” Le présent appareil est conforme aux
CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes: (1) l’appareil
nedoit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d’en compromettre le
fonctionnement.” This Class B digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
IC RF Statement:
When using the product, maintain a distance of 20cm from the body to ensure
compliance with RF exposure requirements.
Lors de l’utilisation du produit, maintenez une distance de 20 cm du corps
afin de vous conformer aux exigences en matière d’exposition RF.
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
Anker Innovations Limited. All rights reserved. eufy Security and eufy
Security Logo are trademarks of Anker Innovations Limited, registered in the
United States and other countries. All other trademarks are the property of
their respective owners.
51005002021 V01
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>