eufy Security EUFYCAM 2 Pro Wire-Free HD Security Camera Set User Guide

eufy Security EUFYCAM 2 Pro Wire-Free HD Security Camera Set User Guide

GETTING STARTED

For Home Base 2 installation

• Home Base 2 (T8010)

• Power Adapter for Home Base 2

• Ethernet Cable

• Metal Pin for Resetting

For eufy Cam 2 Pro installation

• eufy Cam 2 Pro (T8140)

• Micro-USB Charging Cable

• Mounting Bracket

• Mounting Screws and Anchors

• Indoor Mount

• Hook (for Indoor Mount)

1. Camera quantity and accessories vary by bundle package.
2. Home Base 2 power adapter varies by region

PRODUCT OVERVIEW

Home Base 2

1. Status LED
2. Speaker
3. Power port
4. USB port
5. Ethernet port
6. SYNC/ALARM OFF button
7. Reset button

eufy Cam 2 Pro

1. Photosensitive sensor
2. Camera lens
3. Motion sensor
4. Microphone
5. LED indicator
6. Sync button
7. USB charging port
8. Screw hole

CONNECTING THE HOMEBASE 2

Connect the Home Base 2 to the Internet

1. Power on the Home Base 2. Connect HomeBase 2 to your home router using the provided Ethernet cable.
   

2. The LED indicator turns blue (this may take up to 1min) when HomeBase 2 is ready for setup.
   

SETTING UP THE SYSTEM

Download the App and Set up the System

Download the eufy Security app from the App Store (iOS devices) or Google Play (Android devices).

Sign up for a eufy Security account, then follow the onscreen instructions to complete the setup

Note:

• Make sure you place the camera near Home Base 2 (within the distance of 1 ~ 3 feet).
• Make sure you set up Home Base 2 and eufy Cam 2 Pro on the app before you mount the cameras.
• Keep the camera at least 1 ft away from your internal / external hard drives.

MOUNTING THE CAMERA

Find a Good Mounting Spot

To find a spot to mount eufy Cam 2 Pro, you need to test wireless signal strength.

1. Open the eufy Security app, go to Camera Settings > Mounting Guide.
2. To test the wireless signal strength, take your camera and phone to the location where you want to mount the camera.
3. Move the camera as close to the HomeBase 2 as possible if the wireless.
   

Select Height and Location

Hang eufyCam 2 Pro 7-10 ft (2-3 m) above the ground. This height maximizes the detection range of the motion sensor of eufyCam 2 Pro. Avoid placing eufyCam 2 Pro under direct sunligh.

Mount the camera

The camera can be mounted both indoors and outdoors.

1. Turn the knob of the mounting bracket clockwise to loosen and disassemble it.
   

2.  Drill holes with a 15/64 inch (5.95mm) drill bit, then insert the anchors into the holes; anchors are necessary for walls that are made out of hard materials such as concrete, brick, or stucco.
   

3. Firmly screw the base of the mounting bracket onto the wall. Fasten the ball knob of the bracket to the base of the bracket.
   

4. Tighten eufy Cam 2 Pro to the mounting bracket and adjust the viewing angle by checking the live stream feed in the eufy Security app.
   

Tips:

1. The Home Base 2 pairs up to 16 cameras, you can repeat the steps mentioned above to add more eufy Cam 2 Pro cameras to meet different needs of use.
2. For troubleshooting, check Help on the eufy Security App. Refer to App page for LED indicator status.

Mount the Camera Indoors

Stick the camera directly to any flat surface made out of iron. Or you can use the indoor mount to mount the camera:

1. Drill a hole. Use the included anchor if it’s drywall and fasten the hook.
   

2. Hang the indoor mount on the hook.
   

3. Attach eufy Cam 2 Pro to the indoor mount and adjust the viewing angle.
   

CHARGING EUFYCAM 2 PRO

Charge eufy Cam 2 Pro

Method 1

Method 2

Fully charged: Off
Charging time| 12 hours

Anker Innovations Limited. All rights reserved. eufy Security and eufy Security  ogo are trademarks of Anker Innovations Limited, registered in the United States and other countries. All other trademarks are the property of their respective owners.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>