eufy SECURITY T2118 BoostIQ RoboVac 30C Vacuum Cleaner User Guide
- June 12, 2024
- eufy SECURITY
Table of Contents
eufy SECURITY T2118 BoostIQ RoboVac 30C Vacuum Cleaner
Product Information
The product is a RoboVac, designed to autonomously clean floors.It comes with a power switch, a charging base, and a set of foam blocks. The RoboVac can be controlled via the EufyHome app, which requires a Wi-Fi connection. It is equipped with LED indicators to show its charging status.
Product Usage Instructions
- Remove the sticker next to the power switch and the foam blocks beside the bumper before using the RoboVac.
- For the first use, follow the RoboVac to observe and resolve any problems that may occur.
- Always keep the Charging Base plugged in to ensure that the RoboVac automatically returns. The LED indicator on the Charging Base should be solid white when connected to AC power.
- Fully charge the RoboVac before use. The LED indicator on the RoboVac will breathe orange while charging and will be solid blue when fully charged.
- Download the EufyHome app and follow the instructions in the app to complete the Wi-Fi connection. This will allow you to control the RoboVac through the app. Refer to the Owner’s Manual for more details.
- Remove power cords and small objects from the floor that may entangle the RoboVac. You can use the supplied cable ties to organize your wires and power cords.
- Fold tasseled edges of area rugs underneath to prevent tangling with the RoboVac. Avoid cleaning very dark-colored rugs or high-pile rugs thicker than 1.02 in/26 mm, as they may cause malfunction.
- Keep the RoboVac away from spaces lower than 2.87 in/73 mm to prevent it from getting stuck. If necessary, place a physical barrier to block off the problem areas. Avoid using the RoboVac in wet areas.
- Remove objects less than 0.63 in/16 mm in height that the RoboVac may climb on top of.
- To keep the RoboVac away from any specific area or item, apply the Boundary Strip(s) on the floor with adhesive tape to create a virtual barrier. Ensure that the strips are placed flat on the floor.
- Place physical barriers or Boundary Strips in front of fireplaces and areas that may cause damage to the RoboVac if entered.
Using Your RoboVac
- Remove the sticker next to the power switch, and the foam blocks beside the bumper before use.
- Always keep the Charging Base plugged in, otherwise RoboVac will not automatically return.
- When the Charging Base connects to AC power, the LED indicator on the Charging Base is SOLID WHITE.
- Fully charge RoboVac before use. The LED indicator on RoboVac breathes orange while charging, and is solid blue when fully charged.
- Download the EufyHome app and follow the instructions in the app to complete the Wi-Fi connection. Then you can control RoboVac via this app. Refer to the Owner’s Manual for details.
Important Tips
When using for the first time, follow RoboVac to observe and resolve any problems that may occur.
- Remove power cords and small objects from the floor that may entangle RoboVac. You can use the supplied cable ties to organize your wires and power cords.
- Fold tasseled edges of area rugs underneath to prevent tangling RoboVac. Avoid cleaning very dark-colored rugs or high-pile rugs thicker than 1.02 in/26 mm as they may cause RoboVac to malfunction. Keep RoboVac away from spaces lower than 2.87 in/73 mm to prevent RoboVac from getting stuck. If necessary, place a
- physical barrier to block off the problem areas.
- Keep RoboVac away from wet areas.
- RoboVac may climb on top of objects less than 0.63 in/16 mm in height. Remove these objects if possible.
- To keep RoboVac away from any area or item you do not want RoboVac to clean, apply the Boundary Strip(s) on the floor with adhesive tape to create a virtual barrier. Make sure the strips are placed FLAT on the floor.
Safety Guidance
Place physical barriers or Boundary Strips in front of fireplaces and areas that may cause damage to RoboVac if entered.
T2118 51005001160 V01
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>