eufy SECURITY T2119 RoboVac 11S+ Vacuum Cleaner User Guide
- June 12, 2024
- eufy SECURITY
Table of Contents
eufy SECURITY T2119 RoboVac 11S+ Vacuum Cleaner User Guide
Using Your RoboVac
Remove the sticker next to the power switch, and the foam blocks beside the
bumper before use.
- Always keep the Charging Base plugged in, otherwise RoboVac will not automatically return.
- When the Charging Base connects to AC power, the LED indicator on the Charging Base is SOLID WHITE.
Fully charge RoboVac before use. The LED indicator on RoboVac breathes orange
while charging, and is solid blue when fully charged.
Refer to the Owner’s Manual to learn how to select other cleaning modes and to
set cleaning schedules.
Important Tips
Remove power cords and small objects from the floor that may entangle RoboVac.
Fold tasseled edges of area rugs underneath to prevent tangling RoboVac. Avoid cleaning very darkcolored rugs or high-pile rugs thicker than 1.02 in/26 mm as they may cause RoboVac to malfunction.
Keep RoboVac away from spaces lower than 2.87 in/73 mm to prevent RoboVac from getting stuck. If necessary, place a physical barrier to block off the problem areas.
Keep RoboVac away from wet areas.
RoboVac may climb on top of objects less than 0.63 in/16 mm in height. Remove these objects if possible.
Anti-drop sensors prevent RoboVac from tumbling down stairs and steep drops. They may work less effectively if dirty or used on reflective/very dark- colored floors. It is recommended to place physical barriers to block off areas where RoboVac may fall.
Place physical barriers in front of fireplaces and areas that may cause damage to RoboVac if entered.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>