eufy SECURITY T7401 Smart Safe User Guide
- June 12, 2024
- eufy SECURITY
Table of Contents
QUICK START GUIDE
Smart Safe
OVERVIEW
| 
---|---
❶ Keypad
❷ Fingerprint Reader
❸ Mechanical Lock
❹ PANIC Button
❺ Charging Port
❻ Charging Indicator| ❶ SYNC Button
❷ LED Light
SETUP
STEP 1. CHARGE SMART SAFE
Fully charge Smart Safe before first use. This may take 2 hours if you use a
5V/2A adapter.
| Charging Indicator | Description |
|---|---|
| Flashing blue | Charging |
| Blue | Fully charged |
The battery life can last up to 6 months per charge.
STEP 2. UNLOCK SMART SAFE
Two options are available for unlocking Smart Safe for the first time.
Option 1. Default Password
The
default password “123456” will expire after setup. Use the eufy Security app
to set a new password.
Option 2. Backup Key
STEP 3. ADD TO THE EUFY SECURITY APP
-
Download and install the eufy Security app, then sign up for an account.
-
Follow on-screen instructions to complete the setup.
The model T7401 supports 2.4 GHz Wi-Fi only. Make sure the Wi-Fi signal is strong.
STEP 4. MOUNT SMART SAFE (OPTIONAL)
You can mount Smart Safe through the screw holes on the bottom.
Option 1. Wooden Surface
What you need: 
Option 2. Surfaces Made out of Hard Materials
What you need: 
NOTICE
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures: (1) Reorient or relocate the receiving antenna. (2)
Increase the separation between the equipment and receiver. (3) Connect the
equipment into an outlet on a circuit different from that to which the
receiver is connected. (4) Consult the dealer or an experienced radio/TV
technician for help.
FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The
device can be used in fixed/mobile exposure condition. The min separation
distance is 20cm.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables
to maintain compliance with FCC regulations.
The following importer is the responsible party
Company Name: POWER MOBILE LIFE, LLC
Address: 10900 NE 8TH ST, STE 501, BELLEVUE, WA 98004
Telephone:1-800-988-7973
Customer Service
Warranty
12-month limited warranty
Call Us
United States
+1 (800) 988 7973
Mon-Fri 6:15-17:00(PT)
Sat-Sun 6:30-16:30(PT)
United Kingdom
+44 (0) 1604 936 200
Mon-Fri 6:00-17:00
Sat-Sun 6:00-14:00
Germany
+49 (0) 69 9579 7960
Mo-Fr 8:00-16:00
Email Us
[email protected]
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok,
Kowloon, Hong Kong