eufy Security SoloCam L20 Wireless Outdoor Security Camera User Guide
- June 12, 2024
- eufy SECURITY
Table of Contents
eufy Security SoloCam L20 Wireless Outdoor Security Camera
PRODUCT OVERVIEW
-
Camera Lens
-
Motion Sensor
-
Photosensitive Sensor
-
LED Indicator
-
Microphone
-
Mounting Hole
-
SYNC Button
-
Type-C Charging Port
-
Speaker
CHARGING SOLOCAM
Battery-powered
| Charging | Solid blue |
|---|---|
| Fully charged | Off |
SETTING UP SOLOCAM
Download the App and Set up the System
- Download and install the eufy Security app, and sign up for an account.
| 
---|---
- Follow on-screen instructions to add your SoloCam .
MOUNTING SOLOCAM
Select a Location
SoloCam L20 / L40 can be mounted on a wall or ceiling. Select a location where
you can get the desired view. We recommend hanging it 7-10 ft (2-3 m) above
the ground.
Mount SoloCam L20 / L40
SoloCam L20 / L40 can be mounted both outdoors and indoors.
-
Turn the knob of the mounting bracket counterclockwise to loosen and disassemble it.
-
Drill holes with a 15/64 inch (5.99 mm) drill bit, then insert the anchors into the holes; anchors are necessary for walls that are made out of hard materials such as concrete, brick, or stucco.
-
Firmly screw the knob of the mounting bracket into the mounting hole of SoloCam.
-
Hold and screw SoloCam to the mounting bracket. Rotate SoloCam to adjust the view and check it using the live stream which you can access in the eufy Security app.
SoloCam L20 / L40 can be also installed on the ceiling. Follow the steps 1-4 mentioned above to install it.
Tips :
For troubleshooting, check Help on the eufy Security app. Refer to the app
page for LED indicator status.
NOTICE
This product complies with the radio interference requirements of the European Community.
Hereby, Anker Innovations Limited declares that this device is in compliance
with the essential requirements and other relevant provisions of Directive
2014/53/EU. For the declaration of conformity, visit the Web site:
https://uk.eufylife.com/.
This product can be used across EU member states.
Due to the used enclosure material, the product shall only be connected to a
USB Interface of version 2.0 or higher.
The adapter shall be installed near the equipment and shall be easily
accessible. Do not use the Device in the environment at too high or too low
temperature, never expose the Device under strong sunshine or too wet
environment.
The suitable temperature for T8122/T8123 and accessories is -20°C to 40°C
(when charging: 0°C to 30°C).
When charging, please place the device in an environment that has a normal
room temperature and good ventilation.
It is recommended to charge the device in an environment with a temperature
that ranges from 5°C~25°C.
Please make sure to use only the charger provided by the manufacturer. When
the manufacturer does not provide the charger, please use a charger that
complies with EU regulations, otherwise it may cause danger and violate the
authorization of the product and warranty terms.
RF exposure information: The Maximum Permissible Exposure (MPE) level has been
calculated based on a distance of d=20 cm between the device and the human
body. To maintain compliance with RF exposure requirement, use product that
maintain a 20cm distance between the device and human body.
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE
OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
Wi-Fi Operating Frequency Range: 2412~2472MHz; Wi-Fi Max Output Power:19.38dBm
The following importer is the responsible party (contact for EU matters only)
Anker Innovations Deutschland GmbH I Georg-Muche-Strasse 3, 80807 Munich,
Germany
This product is designed and manufactured with high quality materials and components, which can be recycled and reused.
This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.
This product complies
with the radio interference requirements of the United Kingdom
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this product is in compliance
with Radio Equipment Regulations 2017. The full text of the UK declaration of
conformity is available at the following internet address:
https://uk.eufylife.com.
Anker Technology (UK) Ltd I Suite B, Fairgate House, 205 Kings Road, Tyseley,
Birmingham, B11 2AA, United Kingdom
Customer Service
Warranty
12-month limited warranty
Call Us
United States
+1 (800) 988 7973 Mon-Fri 6:15-17:00(PT) Sat-Sun 6:30-16:30(PT)
United Kingdom
+44 (0) 1604 936 200 Mon-Fri 6:00-17:00 Sat-Sun 6:00-14:00
Germany
+49 (0) 69 9579 7960 Mo-Fr 8:00-16:00
Email Us
Customer Support: support@eufylife.com
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong
Kong
@EufyOfficial
@EufyOfficial
@EufyOfficial
References
- eufy - Built with Care | Home Security System & Robovacs | eufy UK
- eufy - Built with Care | Home Security System & Robovacs | eufy UK
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>