SKYDANCE VD1 WiFi and RF 3 Button LED Dimmer User Manual

WiFi & RF 3-Button LED Dimmer
Model No.: VD1(WT)
Tuya APP cloud control /Voice control / 3-button / Wireless remote control / Step-less dimming

Features

• WiFi & RF 1 channel constant voltage single color LED dimmer.
•  5A output, connect with 5 meters single color LED strip.
• Tuya APP cloud control, support on/off, brightness adjust, delay turn on/off light, timer run, scene edit function.
• Voice control, support for Amazon Alexa, Google Assistant, Tmall Genie and Xiaodu smart speakers.
• 3 button operation with on/off and dimming.
• Match with 2.4G single zone or multiple zone single color remote control optional.
• 4096 levels 0-100% dimming smoothly without any

Technical Parameters

Input and Output

Input voltage| 5-24VDC
Output voltage| 5-24VDC
Output current| Max. 5A
Output power| 25W@5V
60W@12V
120W@24V

Environment

Dimming data

Safety and EMC

EMC standard (EMC)| ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
---|---
Safety standard| EN 62368-1:2020+A11:2020
Radio Equipment(RED)| ETSI EN 300 328 V2.2.2
Certi| CE,EMC,RED

Package

Dimension

Wiring Diagram

Note:  Press and hold the and (Brightness-) button for 2s, output LED flashes 3 times, the light on/off fade time will change between 3s and 0.5s.

System Wiring

Note:

1. The above distance is measured in spacious (no obstacle) environment, Please refer to the actual test distance before installation.
2. Please check if the WiFi router net in 2.4G band, the 5G band is not available, and do not hide your router network.
3. Please keep the distance between VD 1(WT) devices and router close, and check the WiFi signals.
4. WiFi signal strength detection: open the main interface of social security, click enter the device interface, click “check device network” for testing,

Button function

: Turn on or off light.
: Brightness +, short press 10 levels, long press 1-6s for continuous 256 levels adjustment.
: Brightness -, short press 10 levels, long press 1-6s for continuous 256 levels adjustment.

Tuya APP network connection

Please download the corresponding tuya/smart life app according to your region.

Press and hold and  (Brightness  +) button for 2s: clear previous network connection, enter Smart config mode, the output LED will flash 10 times.
Press   and hold and (Brightness+) button for 5s:
Clear previous network connection, enter AP config mode, the output LED will flash 5 times.
If smart config failed, please try AP config.
Repeat power on and off for 5 consecutive times, also clear previous network connection, enter Smart config mode, the output LED will flash 10 times.
If Tuya APP network connection succeed, the output LED will stop flash, and in Tuya APP, you can find DIMc device .

Tuya APP interface

White interface
Touch brightness slide to adjust brightness.

Timer, Schedule
The Schedule key can add multiple timers to turn on or turn off light according to different time periods.
The Timer key can turn on or turn off light in the next 24 hours.

Scene interface
The 1-4 scene is static color. the inner color of these scene can be editable.

Match Remote Control (optional)
End user can choose the suitable match/delete ways. Two options are offered for selection:

Use and button Match:
Long press and 2s,output  the LED blinks 2 times, button output immediately press on/off key (single zone remote) or zone key (multiple zone remote) of the remote.
The LED blinks 3 times means match is successful.
Delete:
Press and hold and button for 5s to delete all match,
The LED blinks 5 times means all matched remotes were deleted. output

Use Power Restart
Match:
Switch off the power, then switch on power again, immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 3 times on the remote.
The output LED blinks 3 times means match is successful.
Delete:
Switch off the power, then switch on power again, immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 5 times on the remote.
The output LED blinks 5 times means all matched remotes were deleted.

Dimming Curve

Packing list

FCC Warning
15.19 Labeling requirement s.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
15.21 Information to user.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC RF Radiation Exposure Statement:
1.This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
2.This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator and your body

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>