PNi IP230T Movement Tracking Surveillance Camera User Manual

: June 4, 2024
: PNI

Table of Contents

PNi IP230T Movement Tracking Surveillance Camera
PRODUCT INTRODUCTION AND MAIN FEATURES
CAMERA INSTALLATION
REGISTER / LOG IN WITH EXISTING ACCOUNT
ADD DEVICE
FUNCTION DESCRIPTION
FREQUENTLY ASKED QUESTIONS
PRODUCT SPECIFICATIONS
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

PNi IP230T Movement Tracking Surveillance Camera

PNi-IP230T-Movement-Tracking-Surveillance-Camera-
PRODUCT

PRODUCT INTRODUCTION AND MAIN FEATURES

PNI IP230T product is a 2MP IP camera intended for video/audio surveillance and remote monitoring of desired locations. It connects to the Internet by cable of Wireless in order to remotely transmit realtime video to dedicated app on your smartphone anytime and anywhere. It can save surveillance videos on local microSD card or other compatible devices like PNI surveillance NVR. The camera also supports Motion Tracking , White light at motion detection, alarm functions such as smartphone notifications push and much more other functions.

● High definition recording	● Wireless / wired conection
● Movement tracking	● MicroSD TF card slot max 128 GB
● Schedule and Motion detection recording	● Infrared Night Vision
● Motion detection alarm push notification	● White light illumination at

motion detection
● Tuya Smart iOS & Android App| ● Video streaming
● Two way audio communication| ● Remote camera movement: pan & tilt
● Remote audio monitoring| ● Cloud storage ( optional for monthly fee)

CAMERA INSTALLATION

Important conditions:

Connect camera to a 230V power supply , using power adapter from package;
First configuration of camera should be made with camera close to the Internet source / Router device;
If you need local recording, install a maximum 120 GB TF microSD card ( sold separately) in camera, by removing back panel ( one screw).

Search for “Tuya Smart” app for iOS/Android Smartphones in App Store/Google Play store, or scan the below QR code to download and install dedicated app:

REGISTER / LOG IN WITH EXISTING ACCOUNT

Register
If you don not have a Tuya App account yet, you can register an account or log in via personal e-mail or personal phone number using a verification code procedure. Please read and follow next steps for the description of registration process: PNi-IP230T-Movement-Tracking-Surveillance-Camera-
FIG-2

Authentication
If you have already registered an account, you can skip the creating a new account,click “Log in with existing account”, enter the log in page.

The system automatically select the current Country/Region, or you can manually select the Country/Region.
Enter your registered e-mail address or mobile number enter your password to log in the system.
If your phone has installed WeChat App or QQ App, click WeChat/QQ icon in the log in with social media acount area. After accessing the authorization page, and filled in received code from your e-mail/phone log in the system.

ADD DEVICE

QR code net-pairing (Recommended)
The product only support 2.4GHz Wi-Fi network. It does not support 5GHz Wi-Fi network. Before configuring Wi-Fi, please set the router parameters. The Wi-Fi password should not contain special characters of ~!@#$%^&*(). When configuring Wi-Fi, make sure your router, mobile and device are as close as possible for a quick configuration of the device.
Connect smartphone to this Wi-Fi router with internet access. Activate location from phone if needed.

App supports QR code net-pairing and Wi-Fi connection. You can choose to add device by other options.
Power On the camera, and you can hear the broadcast “Wait for WiFi config”, (if you heard nothing at all, please click and hold “reset” button for 20 seconds to restore factory settings).
When the mobile phone connecting to Wi-Fi, click “Add Device” or “+“ icon (figure 1) on the Home screen of the App, select “Security & Sensor”(figure 2)→ “Smart Camera”, click “next step” (figure 3).
Enter Wi-Fi account and password, click “Confirm” (figure 4).
Hold the mobile phone screen in the front of the camera (figure 5), the distance between the two should be 15 to 20 cm. (figure 6) Try not to shake the mobile phone during the scanning.
When you hear “Connect Router”, click “Connect Internet”, and wait for connecting (figure 7).
Device added successfully (figure 8), you can choose the device name and room scene.

QR WIFI Fast Connection Distribution Network can be connected according to the above steps, skipping Fig. 5 and Fig. 6.

FUNCTION DESCRIPTION

Real-time preview interface
Setting & Management
Sound switch
Full screen
Voice chat
Playback of video
Wi-Fi signal strength 4. SD/HD
Screenshot
Record live view
PTZ control (The camera can be arbitrarily rotated to give you a different perspective. You can move it up and down, capture any corner you want to view)
Motion detection alarm (abnormal report notification through intelligent detection of anomaly in home. You can go out to work and play confidently. To set the alarm level according to the camera’s filed of view can make the alarm more accurate)

CLICK “ 1 “ IN THE UPPER RIGHT CORNER OF THE CONTROL PAGE FOR THE MANAGEMENT AND SETTING OF THE DEVICE.

Device Name – can modify the device name and device location;
Device Information – to view: Device ID, Wi-Fi signal strength, IP address, Mac address, Device time zone.
Tap-to-Run and Automation – View automations and scenaries created for this device
Third Party Supported – Compatible smart services
Basic Settings – Basic settings of camera
IR Night Vision – Settings for IR function
Detection Alarm Settings – can set the motion detection switch, motion detection alarm sensitivity and motion tracking function
Storage settings – Shows microSD card informations, and settings for Local Recording mode.
VAS – Value-added service : you can purchase separately video cloud storage service for this camera for monthly fee (optional according to customer needs)
Offline Notification – Activates an alarm is camera goes Offline
Share Device – can share this device to other people, enter the people’s e-mail or mobile phone number;(Note: the entered e-mail / mobile phone number should be registered with a Tuya App account).
FAQ & Feedback – Questions and solutions for any problems with product behaviour.
Firmware Information – Support OTA Remote Upgrade (Do not disconnect during upgrading).

CLICK “ME” ON THE HOME SCREEEN OF TUYA APP FOR MORE SERVICES

Home Management
Message Center
FAQ & Feedback
More Services
Free Services: IFTTT , Google Assistant, Alexa, etc;
Value-added Services : you can check the purchasing record of purchased value-added services: Cloud Storage for Cameras, AI Filtered Notifications etc;
Settings and informations for your Tuya app account: Sound, Notifications, Network, Cache

FREQUENTLY ASKED QUESTIONS

Q:Fail to add device during net-pairing?
A:Please make sure the mobile phone and device are connected to 2.4GHz router. Make sure the correct Wi-Fi password is entered.
Q:Still fail to add device after re-scanning?
A:If fail to add device, it is recommended to restart the device or power off the device, and try again.
Q: The device cannot preview?
A:Check for weak Wi-Fi signal. You can place the camera closer to the router. If it still doesn’t work, reset the device, and add it again.
Q:Why the device is still on the list after resetting the device?
A:The device resetting only resets the camera’s network configuration and cannot change the configuration on the App. You must log in the App to delete the camera from the list.
Q:How to connect the camera to another router?
A:First log in the App to delete and reset the device, and configure the device again through the App.
Q:Why the device cannot identify SD card?
A:It is recommended to insert and remove the SD card after power off the device. Check if the SD card is under normal service conditions and the format is FAT32. The App shall suggest “”could not find SD card”” under unstable network of the mobile phone or the device.
Q:The device is online and has an alarm event, but the mobile phone cannot receive the information?
A:First confirm that App allows notification in the settings of your mobile phone.

Under normal circumstances, when an anomaly is detected, a message will appear in the notification bar of your mobile phone. Your should set a notification sound or vibration in your mobile phone.
In addition, when viewing real-time video in the App you cannot receive alarm from the camera being viewed. Because the device default function the camera being viewed indicating that the user is focusing on the monitoring video, and there is no need for an alarm. Using the advanced intelligent alarm push algorithm to ensure that the alarm message will not be frequently, but the camera will record all the alarm messages and videos.

PRODUCT SPECIFICATIONS

9. PRODUCT SPECIFICATIONS

system

Video

Audio

| Coding standard| G.711
Two-way Speech| Support

Record management

| Video file size| 2.5GB-4.5GB/Day
Record Mode| Manual record, motion detection record, scheduled record, alarm record
Video storage| TF Card/Csloud
playback, back up| Support
Alarm trigger| Alarm recording, screen shot capture

Network

extend

| TF Card| Maximum support 128GB TF card
Reset key| Support

power supply

| Power| DC 12V 2A
Power consumption| 12W

work environment

General

| Material| ABS for outdoor use
Product weight| 513 g

Documents / Resources

| PNi IP230T Movement Tracking Surveillance Camera [pdf] User Manual
IP230T Movement Tracking Surveillance Camera, IP230T, Movement Tracking Surveillance Camera, Tracking Surveillance Camera, Surveillance Camera, Camera
---|---