NI-8102W Birdfy Feeder User Manual
- May 15, 2024
- Birdfy
Table of Contents
NI-8102W Birdfy Feeder
Specifications
- Device Name: Birdfy Feeder
- Model Number: V-Birdfy Feeder-A3-20230904
- MicroSD Card Support: Class 10, up to 128GB
- Charging Cable: Type-C, DC5V / 1A
- Wi-Fi Compatibility: 2.4GHz
- Waterproof Rating: IP65
What’s in the Box
The Birdfy Feeder package includes a black strap, roof, mounting bracket,
perch screw, perch, drilling template, tripod adapter, feeder & camera, Type-C
charging cable, connection cable for a solar panel, quick guide, hose clip,
screws for mounting on wood and concrete, ejector pin, and anchors.
Inserting MicroSD Card
- Rotate the camera downwards to access the built-in card slot.
- Open the silicone cover and insert the microSD card with the label facing upward.
- Securely put back the silicone cover.
Camera Charging
Charge the camera for 14 hours using the provided Type-C charging cable
(DC5V / 1A). The status light will be solid yellow while charging and solid
green when fully charged.
How to Turn on & off the Camera
To turn on or off the camera, long-press the power button located at the top
of the camera.
Read Before Installing
- Avoid direct exposure of the camera lens to sunlight.
- The camera is rated IP65 waterproof for rainy or snowy conditions but should not be submerged in water.
- Ensure the device is within range of a 2.4GHz Wi-Fi signal and avoid interference from strong light sources or appliances like microwaves.
AI Bird Identification
Utilize the AI Bird Identification feature to identify visiting bird
species in real time. Subscription access is required for this feature.
FAQ
Scan the QR code provided in the manual to access the FAQ for additional
product information and troubleshooting.
Warning
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications made without explicit approval from the
responsible party in compliance may result in the user being unauthorized to
operate the device.
This device meets the FCC radiation exposure limits for uncontrolled
environments. To ensure safe installation and operation, maintain a minimum
distance of 20cm between the radiator and your body.
FCC ID: 2AO8RNI-8102W
CE Statement
The information provided on the packaging is allowed to identify geographical
areas within the member states where restrictions on use or requirements for
authorized use exist, if applicable. The structure of the product allows it to
be used in at least one member state without violating applicable requirements
for the use of radio spectrum.
Manufacturer information
Netvue Technologies Co.,Ltd.
Room A502, Shenzhen International Technology Innovation Academy, 10th Kejinan
Road, Shenzhen Science Park, Nanshan District, Shenzhen, P.R.China, 518000
What’s in the Box
Inserting MicroSD Card
Birdfy Feeder comes with a built-in card slot that supports Class 10 microSD cards with capacities of up to 128GB.
- Step 1: Rotate the camera downwards.
- Step 2: Open the silicone cover and insert the microSD card. Make sure it is properly positioned with the label facing upward.
- Step 3: Put back the silicone cover.
Camera Charging
The camera does not come fully charged due to safety regulations. Before using it for the first time, please charge it for 14 hours with the charging cable inside the box (DC5V / 1A).
- Status light is solid yellow: charging
- Status light is solid green: fully charged
How to Turn on & off the Camera
Turn on &off the camera
Long press the power button at the top of the camera.
Read Before Installing
-
Keep Birdfy Feeder and all accessories out of the reach of children and pets.
-
Make sure the camera is fully charged (DC5V / 1A).
-
Working temperature: -10°C to 50°C (14°F to 122°F)
Working relative humidity: 0-95% -
Please avoid exposing the camera lens to direct sunlight.
-
The camera has an IP65 waterproof rating, which allows it to function properly in rainy or snowy conditions. However, it should not be submerged in water.
Note
- Birdfy Feeder only works with 2.4GHz Wi-Fi.
- Strong light may interfere with the device’s ability to scan QR codes.
- Avoid placing the device behind furniture or near a microwave oven. Please try to keep it in the range of your Wi-Fi signal.
AI Bird Identification
With AI Bird Identification, you can find out in real-time which bird species are visiting your feeder. A subscription is required to access this feature.
Learn more on my.birdfy.com
Scan the QR code to access the FAQ for the product.
Contact us at
- [email protected]
- In-App Chat
- 1(886)749-0567
- Mon-Fri, 9am-5pm, PST
- @Birdfy by Netvue
- @netvuebirdfy
- www.birdfy.com © Netvue Inc.