tmezon MZ-VDP-739EM Video Door Phone Doorbell Intercom System User Manual
- June 14, 2024
- TMEZON
Table of Contents
- Accessories
- Specification
- Install the indoor monitors
- Note On Wiring Connection
- WIRING DIAGRAM
- DESCRIPTION ON INDOOR UNIT
- Package Contents (Please check actual model)
- Overview
- Specification
- Wiring diagram
- Installation process of outdoor units
- Connect To The Electronic Co I Lock
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
tmezon MZ-VDP-739EM Video Door Phone Doorbell Intercom System User Manual
Accessories
4 pin cable to extend monitor-doorbell, monitors
Specification
Display screen | 7″ TFT LCD Screen |
---|---|
Definition | 1024(H)*600(V) |
Standard | PAL/NTSC |
Calling mode | Two-way conversation |
Calling time | 120s |
Standby current | Maximum 400mA |
Work current | Maximum 800mA |
Power supply | External switching power supply(DC12V) |
Work temperature | -10’C-60’C |
Installation way | Surface mounting |
Built-in storage | Yes |
Picture format | JPEG standard format |
Extension memory | SD card(maximum 64GB)(Class 10) |
Install the indoor monitors
Note On Wiring Connection
The power supplies for electric lock, CCTV cameras and extension cables are not included in the package, user can purchase according to actual requirement.
The indoor monitor is with an external switching power supply DC 12V. If you
don’t want to use the external power supply, please use 2 pin cable and DIN
rail power supply to extend the power cable to your home power supply center
and hide the wire in the wall. If over 3m, we suggest you to use the thicker
power cable and higher ampere power supply, or the monitor and doorbell can
not get enough power, which will affect the conversation and unlocking.
Wiring connection according to the following to avoid interference:
The wiring connection requirement(The actual effect and the quality of wire rod has the very big relations):
-
4-Core ordinary unshielded and shielded wiring cable;
-
Effective distance from the outdoor camera to furthest indoor monitor:
Transmission <30m (4×0.4mm’) Transmission <60m (4×0.65mm’)
Unshielded cable: -
1f you want to extend the distance over 60m, you’d better to choose a thick copper core cable, or a shielded wiring cable, or a 3-core ordinary unshielded wire + a 75-3 video wire.
When using a shielded wiring cable, please connect the shield terminal with the GND.
Shielded wiring cable:
3-core unshielded wiring cable+75-3 video wiring cable:
Connect the shield of the 75-3 video wiring cable with the GND of the 3-core unshielded wiring cable.
-
If user wants to use CAT5 or CAT6 network cable, effective distance from the outdoor camera to the furthest indoor monitor will be limited. For unshielded network cable, the distance will be up to 20m. For shielded network cable, the distance will be up to 40m. So CATS5 or CAT6 network cable is not recommended.
CATS or CAT6 network cable consists of 4 pairs of twisted pairs(8 wires), here one pair of twisted pair will be used as one cable. Green & White+ Green, Brown & White + Brown, Orange & White + Orange, Blue& White + Blue.
Unshielded network cable:
Shielded network cable:
Connect the shield of the network cable with the GND.
When the distance from the outdoor doorbell to the indoor monitor is too far, maybe over 50m or 60m, make sure the input voltage from the monitor to the outdoor doorbell must reach 11.7V when unlocking.
WIRING DIAGRAM
Note :
One intercom kit supports up to 4 monitors, but we suggest to connect 3
monitors.
Because the cable is too long, the image will be black and white on the
monitor.
The default mode of the monitor is Master mode. Multiple monitors connected, ensure that the wiring and settings are correct as follows.
- Connect from “Out” port of Master monitor to the “In” port of Slave monitor. Connect from “Out” port of the last monitor to the “In” port of the next monitor.
- Set as Slave mode for all the Slave monitors
DESCRIPTION ON INDOOR UNIT
NO. | NAME | Description |
---|---|---|
1 | Power | Power LED, the power Indicator of the indoor monitor. |
2 | 1 | The door 1 state lights, to door 1 working when the LED is on. |
3 | 2 | The door 2 state lights, to door 2 working when the LED is on. |
4 | TFT display | View visitor’s image displayed on the TFT screen. |
5 | Microphone | Transmit the voice to outdoor camera. |
6 | —. …. | |
Transfer call |
- Transfer call, during conversation with the doorbell, press this button to intercom call or transfer calls to another indoor monitor.
- Internal call, when all the indoor monitors are in standby mode, press this button to intercom call to another indoor monitor.
7| .8.
Monitoring| Monitoring, press the button to watch the outdoor bell and CCTV
camera images.
8| 0 Talk| Talk, press this button to activate conversation mode.
9| O a Unlock| Unlock, release the door lock.
10| 0
Hang up| 1. Hang up, press this button to end conversation mode.2. Press this
button to return to previous menu or cancel the selection.
11| 0 Setting| The button is a composite key, users can press the button,
scroll the button upward or downward to configure the parameters.
12| Speaker| Hear the sound from outdoor doorbell.
13| TF card slot| TF card interface. insert the TF card to store video
recordings and photographs. supports up to 64GB.
Video recoding files will be stored in the TF card. photographs will be stored
in the TF card of the indoor monitor firstly.
In case there is no TF card in the device, snapshots will be stored into the
flash of the device.
And suggest that it’s better to use a TF card more than class 10 onto the
device.
Package Contents (Please check actual model)
Model: MZ-VDP-NA200
-
Outdoor doorbell
-
Bracket
-
Screw anchors
-
Screws (2)
-
User Manual
-
Waterproof cover
-
2p plastic conductor
-
4P plastic conductor
Model: MZ-VDP-NE120
-
Outdoor doorbell
-
Angle bracket (optional)
-
Waterproof cover (optional)
-
2P plastic conductor (1)
-
4P plastic conductor
-
User manual
-
Hex wrench
-
Screw anchors
-
Affixation screw
Overview
Model: MZ-VDP-NA200
No. | Descriptions |
---|---|
1. Weather shield | Affix and protect outdoor doorbell from rain/snow |
2. IR LEDS | Provides illumination with IR LEDs for better visibility |
3. Camera | Capture image to transmit to the monitor |
4. Speaker | Sound from indoor monitor |
5. Call button | Call indoor monitor for intercommunication |
6. Microphone | Transmit voice to the indoor monitor |
7. System port | Connect the indoor monitor |
8. Switch output mode | Press and hold this button for 5 seconds to switch |
the output mode among CVBS/720P/1080P
9. Door lock port| Connect to the door lock.
Model: MZ-VDP-NE120
No. | Descriptions |
---|---|
1. Weather shield | Affix and protect outdoor doorbell from rain/snow |
2. IR LEDS | Provides illumination with IR LEDs for better visibility |
3. Camera | Capture image to transmit to the monitor |
4. Speaker | Sound from indoor monitor |
5. Call button | Call indoor monitor for intercommunication |
6. Microphone | Transmit voice to the indoor monitor |
7. Screw slot | Slots for installation screws |
8. System port | Connect to the indoor monitor. |
9. Door lock port | Connect to the door lock. |
Specification
**Model: MZ-VDP-NA200
**
Camera | 1/3 inch CMOS camera |
---|---|
View angle | 115′(H.) |
Definition | 1080P(19201080)/720P(1280720)/CVBS |
LEDs for night | IR LEDs(120° ) |
Day/Night | IR-CUT |
Power consumption | 300mA max. |
Power supplier | Supplied from indoor monitor |
Operation temp. | -20°C-+60t |
Installation | Surface mount |
Model: MZ-VDP-NE120
Camera | 1/3 inch CMOS camera |
---|---|
View angle | 115′(H.) |
Definition | 1080P(19201080)/720P(1280720)/CVBS |
LEDs for night | IR LEDs(120° ) |
Day/Night | IR-CUT |
Power consumption | 300mA max. |
Power supplier | Supplied from indoor monitor |
Operation temp. | -20°C-+60t |
Installation | Surface mount |
Wiring diagram
The power supply of the outdoor doorbell is supplied with an indoor monitor. User can connect electronic control lock to the doorbell, the lock can be connected with the door lock port.
The terminal is defined functionality as below:
- Video
- GND
- Audio 4
- Power(DC 12V)
- /6. Unlock: Connect to door lock.
The terminal is defined functionality as below:
- Power(DC 12V)
- Audio
- GND
- Video
- /6. Unlock: Connect to door lock.
Installation process of outdoor units
Model: MZ-VDP-NA200
Model: MZ-VDP-NE120
Connect To The Electronic Co I Lock
Note:
- The doorbell or the monitor will not provide the power to door lock
- The doorbell can support door locks within 30V.
- Door lock’s power supply depends on its door lock, if the door lock is 12V, the corresponding power supplyis 12V, etc.
- Make sure the input voltage from the monitor to the outdoor doorbell must reach 11.7V when unlocking.
NO Lock: Always closed when power or power off, only open when press
unlock
NC Lock: Always openwhen power off. Closed when power and open after
press unlock
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>