ERGOAV ERSSL1-01B Bookshelf Speaker Stand Instruction Manual

: October 30, 2023
: ERGOAV

ERGOAV ERSSL1-01B Bookshelf Speaker Stand

ERGOAV ERSSL1-01B Bookshelf Speaker Stand

Thank You for Choosing this ErgoAV Product!

At ErgoAV, we want to add value to your AV experience by providing the highest quality products and services in the industry. If you have any concerns or comments, please contact us.

Important Safety Instructions

Check package contents against Supplied Parts and Hardware List to assure that all components were received undamaged. Do not use damaged or defective parts. If you require replacement parts, contact customer service at support@ergoav.com.
Not all parts and hardware included will be used.
Carefully read all instructions before attempting installation. If you do not understand the instructions or have any concerns or questions, please contact customer service at support@ergoav.com.
This product may contain moving parts. Use with caution.
Do not use this product for any purpose that is not explicitly specified in this manual.
Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.

Weight Restrictions

If your speaker weighs more, this stand is NOT compatible

WARNING

DO NOT exceed the maximum weight indicated. This speaker stand is intended for use only within the maximum weights indicated. Use with products heavier than the maximum weights indicated may result in failure of the stand and its accessories, causing possible damage and or injury.

Supplied Parts and Hardware

WARNING:

This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. Do not use damaged or defective parts. If you need replacement parts, please contact Technical Support at (877) 419-7832 or Customer Service at support@ergoav.com.

NOTE: Not all hardware included in this package will be used.

Supplied Parts and Hardware

| |
---|---|---

Base

|

Top Plate [02] X 2

|

Pillar [03] X 4

|

Thread Rod [04] X 2

|

Thread Rod [05] X 2

|

Plastic Cover [06] X

|

Connector [07] X 2

| |

Spikes [A] X 8

|

Cover [B] X 8

|

Steel Washer [C] X 2

| | ****

Nut MB [D] X 2

|

Rubber Pad [E] X 8

|

Wrench [F] X 1

Assemble Spikes to Base

Mounting the Spikes [A] and Covers [B] on the Base [01 ].

NOTE: Covers [B] can be used as an alternative if Spikes [A] will damage floors.

Step 1 Assemble Spikes to Base
*[01 ]1
[A]4 [8]4**

Assemble Pillar to Top Plate

Thread part [05] and [04] together. Thread the assembled Rod into the Top Plate [02]. Then put Pillar [03] and Connector [07] on the Thread Rod as shown.

[02]1 [04]1 I
*! [05]1 [07]1 [03]2**

Assemble Base to Pillar

Install Cover [06] and Base [01] on Pillar [03] as shown in the figure. Put on the Steel Washer [C] and Nut [D], then use the Wrench [F] to tighten the Nut [D]

Step 3 Assemble Base to Pillar
[01 ]1 [06]1
*[C]1 [0]1 [F]1**

Attach Rubber Pads to Top Plate

Remove the backing paper from the Rubber Pad [E] and attach the Rubber Pad [E] to the Top Plate [02]. Secure the speaker to the Top Plate [02].

Attach Rubber Pads to Top Plate
*[E]4**

Wire Management

Set the speakers on the Top Plate [02] and route the wires through the pillar as shown.

( Optional) Adjust Level of Base

To level and stabilize the base, you can remove the Cover [B] (if needed) and rotate the Spike [A]. Repeat on each corner as necessary.

At ErgoAV, we strive to provide the highest value products.
We want to support your purchase. If you have questions, concerns, or feedback please let us know!

ErgoAV Customer Care
Phone(877)419-7832
support@ergoav.com

| |
---|---|---

A/V Furniture

|

TV mounts

|

Tabletop TV Stands

Speaker Accessories

The ERSSL1-01B is designed to hold medium to large bookshelf speakers weighing up to 22 lbs. The adjustable feet or spikes level stand on uneven floors and improve acoustics. Built in cable management allows cables to run through the pillar to create a clean and finished look. Steel pillar and glass base provide a strong and stylish foundation for your speaker. 28″ height places the speaker at optimum listening level.

Features

Heavy duty design holds medium to large bookshelf speakers weighing up to 22 lbs.
Adjustable feet or spikes level stand on uneven floors and improve acoustics.
Cable management – cables run through pillar to create a clean look.
Solid Foundation – steel pillar and glass base provide a strong and stylish foundation for your speaker.
28″ Tall to place the speaker at optimum listening level.

WARRANTY 5-Year

Product Specifications| DIMENSIONS (W x H x D)| PRODUCT WEIGHT| LOAD CAPACITY| FINISH| AVAILABLE COLORS
---|---|---|---|---|---
12.5″ × 28.4″ × 12.6″| 15.3 lbs| 22 lbs| Powder Coating| Black
318.3mm × 722mm × 320mm| 6.96 KG| 10 KG
Package Specifications| PACKAGE SIZE (W x H x D)| PACKAGE WEIGHT| PACKAGE UPC CODE| PACKAGE CONTENTS| UNITS IN PACKAG
---|---|---|---|---|---
20.4″ × 6.4″ × 14.6| 18.3 lbs| 810082200287| Product, Manual, Parts| 1 Unit
517mm × 163mm × 372mm| 8.29 KG
Master Carton Specifications| PACKAGE SIZE (W x H x D)| PACKAGE WEIGHT| UNITS IN CARTON
---|---|---|---
20.9″ × 13.4″ × 15.4″| 38 lbs| | | 2 Unit
530mm × 340mm × 390mm| 17.24 KG

Product Dimensions

** _FRONT VIEW

TOP VIEW

BACK VIEW

SIDE VIEW_**

ERSSL1-01B
Speaker Stand

The information and designs contained in this document are confidential and the proprietary property of BESTERGO, Inc neither the design nor any information contained in this drawing may be reproduced, used, or disclosed to others without the express written permission of BESTERGO, Inc.

FRONT VIEW

SIDE VIEW

Top View

3-D View

Customer Support

9501 Louisiana Ave N, #200, Brooklyn Park, MN 55445
www.ergoav.com

ErgoAV Customer Care
phone(877)419-7832
email: support@ergoav.com
website: www.ergoav.com
address: 9501 Louisiana Ave N, #200, Brooklyn Park, MN 55445

Logo