Shenzhen Yongdongke Innovation Technology NQBL1 NewQ White Noise Night Light User Manual
- June 9, 2024
- Shenzhen Yongdongke Innovation Technology
Table of Contents
Shenzhen Yongdongke Innovation Technology NQBL1 NewQ White Noise Night
Light User Manual
IMPORTANT SAFETY INSTRUCTIONS
READ AND FOLLOW ALL SAFETY INFORMATION AND INSTRUCTIONS. KEEP FOR FUTURE REFERENCE.
When using an electrical appliance, bask precautions should always be followed. including the following:
-
To ensure correct and safe installation, usage and functioning of the product, always follow these instructions carefully and keep for future reference. Use ONLY the provided US8-C cable and AC poweradapter.
-
For stable and enough brightness, ensure an input power of more than SV=2A by power adapter.
-
The luminaire cannot be replaced, please do not dismantle or modify by yourself. Otherwise it will be deemed as waiver of warranty. Always ask professional electricians or autho rized technicians for repair.
-
DO NOT place or operate near extreme heat sources, moisture, or corrosive substances.
-
DO NOT operate any light with a damaged cord or after malfunction occurs, or damaged in any manner. Discard the light. or return it to an authorized service facility for examination or repair.
-
Always unplug prior to installation, maintenance or repair activities.
DO NOT remove the power plug with wet hands as it may cause electrical shock. -
Follow local ordinances and recycling instructions regarding disposal or recycling of the device and device components.
-
If you have any product problems or report an unexpected situation during use. please contact the Customer Support at [email protected].
-
THIS IS AN ELECTRIC LAMP – NOT A TOY? TO AVOID RISK OF FIRE. BURNS, PERSONAL INJURY AND ELECTRIC SHOCK IT SHOULD NOT BE PLAYED WITH OR PLACED WHERE SMALL CHILDREN CAN REACH IT • FOR HOUSEHOLD USE ONLY
KNOWING WHITE NOISE NIGHT LIGHT
Specifications
| Model | NO-AL-01 |
|---|---|
| Input | 100-240V-50/60HZ DC 5V=2A |
| Power | Light SW. Speaker 3W |
| Supported OS | Android 5.0 or higher iOS 10A or higher |
| Lumens | 125Imi–10% |
| Color Temperature | 3000K |
| CRI | >80 |
| Operating Temperature | -10PC – 40’C |
| Ofespan | 25000 Hours |
Front
**Rear
**
**User Manual
**
**Power adapter
**
USB-Cable
| volume tip/Down | Shat press to alast madame by step (6 Levels) | |
|---|---|---|
| Press and held to cannelVolume sapless,/ (cycle through0-100%ot I 001h0 |
within 35).
Auto OFF Tana
Turn ON| | • RepeateCtyptess to cycle through 30-> 60-> 110.- When time is up.
all sound& nbDht light and indicators will turn oft
Cancel| | Press and heti to cancel auto OFF timer. Timer indicator…III turn
off
Night Light Control
Tram ONt00| | Short mess to tum OWCP P hIght light.
Brightness
Control| | Press and held to athuSt Brightness ‘topical,.
Color Switch| | Double press to stad rainbow mode Shen press to select you.
fassaite cola. Double press to out rainbow mode.
Sound Made| | Repeatedly Press to cycle through 3 Sound Modes: Nature ->
Animal -> Wire nose.
SoundSelection| | Repeatedly press to cycle. through Sounds in each male
a:Nature sound/ Mims! sound/White noise.
Play/Pause| | Short Press to Ply Of Pause.
Display Control
Yuen ON/OFF
BrightnessControl| | shat ‘Nets to tum CWOFF disglay et adjust etightbess by
stela
Bluetooth Pairing
Default| Poweron| Bluetooth will turn on automatically.
Pairing| 1S| Once turned on. press it to bring into pairing mode.· Flashing
—Pairing· Solid –Connected· Off—Connection failed /Offline
Restore Default
Manufacturing Settings
Reset| 55| Press and hold to restore default manufacturing settings.
SAMART CONTROLLING VIA APP
Connecting with Smart Device
Download ‘One Light”App from the Apple App Store and install.
Download “One Light”App from the Google Play Store and install.
-
Make sure your smart device has Nuetooth and Location turned on.
-
Download ‘One Light’App.
-
Open App, tap’Pairing’ to connect the light.
-
Connect to a power source. It will enter Pairing Mode automatically. Note: If indicator does not flash white, refer to FAQ for solutions.
-
Follow the on-screen instructions to add your light.
Controlling via One Light App
One Light App allows you to control and customize your controls for White
Noise Night Light via your smart device.
CLEANING AND MAINTENANCE
- Wipe with a dry cloth to dean and yet of dust on a regular basis.
- Do not immerse in water or liquids.
- The night light shall not be collided or crushed.
- Avoid contact with sharp objects and strong chemicals.
- When not in use for a long period of time, it is recommended to store in a cool, dry location.
TROUBLESHOOTING GUIDE
The following troubleshooting guide addresses the most common problems. If problems persist, contact the Customer Support at [email protected]
RELATED TO APP/CONNECTIVITY
| Problem | Solution |
|---|---|
| Cannot enter Pairing Mode (Bluetooth indicator does not flash white). |
- Indicator OFF:
Press the Pairing button to bring into pairing mode.
Cannot connect bluetooth/ bluetooth connection unstable.|
- Make sure your smart device’s Bluetooth and Location are turned on.
- Avoid obstacles such as metal doors and windows, multiple walls, etc.
- Bluetooth indicator on means the light has been paired with other devices, please reconnect the power
Cannot connect my light to One Light App?|
- Make sure both your smart device and lights have bluetooth turned on·
- Make sure your smart device has Location turned on.
- Follow the steps in “Connecting with Smart Device” to try again.
Can I control the light without using the App?| Yes, the App is for extra features.The light works perfectly fine without connecting to a smartphone.
RELATED TO THE NIGHT LIGHT
| Problem | Solution |
|---|---|
| Failed to light up after connecting. |
- Make sure the light is connected to an appropriate electrical outlet
- Check if the light is turned on.
Control panel is not responsive.|
- Operate with dry hands.
- Disconnect the power adapter to restart the light
LED failure or bad smell.| Please contact NewQ Customer Support.
FCC STATEMENT
- This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference,and
- This device must accept any interference received, including interference that may cause undesired operation.
- any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE:This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interferenceto radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures: Reorient or relocate the receiving antenna. Increase the
separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected. Consult the dealer or an experienced radio/TV
technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body
Support
E-mail: [email protected]
MANUFACTURER
Manufacturer: Shenzhen Yongdongke Innovation Technology Co.Ltd.
Address: 3-B03, Building A, Qingchuang City, Zhangkeng Complex, Minzhi Street,
Longhua District, Shenzhen, China