ULTIMEA U2100 2.1 Channel Soundbar With Separate Subwoofer User Manual
- June 14, 2024
- ULTIMEA
Table of Contents
- ACCESSORIES LIST
- SOUNDBAR CONTROL
- CONNECT TO SUBWOOFER
- CONNECT TO THE TV VIA ARC
- CONNECT TO THE TV VIA OPTICAL / AUX
- CONNECT TO BLUETOOTH®
- PLACEMECT OPTIONS
- WALL MOUNT INSTALLATION
- SPECIFICATION
- SAFETY INSTRACTION
- PROPER DISPOSAL INSTRUCTION
- FCC REGULATORY COMPLIANCE
- ISED WARNINGS
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
User Manual
Nova S40 U2100 2.1 Channel Soundbar
With Separate Subwoofer
WE ARE READY TO HELP
Prefer video tutorial?
Setup guidance video, USER MANUAL or Trouble Shooting on ULTIMEA website.
@ultimea_officalsupport.ultimea.com
https://web-u.shengcai.net/bnl7/H666G_WoSGG
+1 888-598-8875 (US) Mon-Fri 9am-5pm
(PST)
+49 89-628-25828 (EU) Mon-Fri 9am-Spm (CET)
ACCESSORIES LIST
SOUNDBAR CONTROL
Control Panel
-
“ “Power Button
Press to power on / Hold for 3 seconds to power off. -
“ ”: Input Mode
Press to switch channels: ARC-OPT(OPTICAL)-BT-AUX-USB. -
“ “:BT
Press to switch to Bluetooth channel and enter pairing mode. Hold for 3 seconds to disconnect the current device and connect to a new device manually on your mobile phone / PC / TV (BT ID: Nova S40). -
“ ”: Volume Down
-
“ ”: Volume Up
Remote Control
-
“ ” : Power Button
Press to power on / Hold for 3 seconds to power off. -
“ “: ARC
Press to switch to ARC channel, -
“ “BT
Press to switch to Bluetooth channel and enter pairing mode. Hold for 3 seconds to disconnect the current device and connect to a new device manually on your mobile phone / PC / TV (BT ID: Nova S40). -
“ “: OPT
Press to switch to OPTICAL channel. -
“ “: AUX
Press to switch to AUX channel. -
“ “ LED
Press to turn on the LED, press again to turn off. -
“ ” USB
Press to switch to USB channel. -
“ “: Volume Up
-
“ “: Volume Down
-
“ ” Previous
For BT and USB mode only: Skip to previous track. -
“ ” Next
For BT and USB mode only: Skip to next track. -
“ ”: Play / Pause
For BT and USB mode only.
USB mode: Hold for 3 seconds to switch between single loop playback and list loop playback. -
“MOVIE”: MOVIE
Press to switch to MOVIE mode, the display will show: “ “ -
“GAME”: GAME
Press to switch to GAME mode, the display will show: “ “ -
“MUSIC”; MUSIC
Press to switch to MUSIC mode, the display will show: “ “. -
“ ” BASSMX™
Press to adjust bass level, the display will show: . -
“ “: Mute / Recover the volume.
CONNECT TO SUBWOOFER
CONNECT TO THE TV VIA ARC
Step 1:
Connect one end of the HMI cable to the.
ARC/eARC port on the back of your TV.
Step 2:
Then connect the other end into the HOMI ARC port of the soundbar.
Step 3:
Press “ARC button on the remote control to select “ARC” input.
If there is no sound, try setting the TV audio output to PCM:
TV Settings > Home > Settings > Sound > Digital Audio Output> PCM
Note: Please turn on the “CEC” function on your TV.
When ARC is connected, your TV remote contol can contolthe soundbar and TV
simltansously: 1 Tum onlofl 2 Adjust the volume
CONNECT TO THE TV VIA OPTICAL / AUX
-
Make sure the TV’s port is OPTICAL OUT, connect both sides of the. cable to OPTICAL, for both the TV and the soundbar.
-
Make sure the optical plug is inserted correcty s it shows in the picture. Do not insert the plug upside down and break the optical.
Note: If audio s playing from the internal TV speakers, mute or minimize the TV volume. -
Connect the 3.5mm to 3.5mm Audio Cable to your TV’s AUDIO OUT port.
-
Not support AUDIO IN port on TV.
Note: Please remember to unplug the AUX cable from TV and ‘Soundbar when you want to switch to other mode.
In Optical Mode: Ifthere is no sound, try setting the TV audio output to PCM: TV Settings > Home > Settings > Sound > Digital Audio Output > PCM
CONNECT TO BLUETOOTH®
- Pressthe “ ” button on the soundbar or remote control to enter Bluetooth pairng mode.
- Open your phone’s Bluetooth settings, find and select “Nova “ ” to connect the soundbar.
Note: If is already In the Bluetooth mode and connected, press and hold *3 ™ button for 3 seconds to disconnect the current device and connect to a new device manually on your mobile phone / PC / TV.
PLACEMECT OPTIONS
WALL MOUNT INSTALLATION
SPECIFICATION
Model Number | U2100 |
---|---|
Power Supply | AC 100-240V, -50/60Hz |
Soundbar Drivers | (1.2″ x 3.8″) x 2 (Soundbar) + 5.25″ (Subwoofer) |
Frequency Response | 45Hz – 18kHz |
Standby Power | <0.5W |
Operating Temperature | 0°C – 45°C / 32°F – 113°F |
Bluetooth Vision | 5.3 |
Dimensions and Weight
Soundbar | 400(W) x 38(H) x 76(D)mm 15.7″ x 1.5″x 3.0″ |
---|---|
Subwoofer | 270(W) x 115(H) x 270(D)mm 10.5″ x 4.5″ x 10.6″ |
Packaging | 3320W) x 432(+) X190(D)mm 13.1″ x 17 x 75″ |
Net Weight | 3.3kg / 7.28lbs |
Gross Weight | 4.2 kg 9.6lbs |
SAFETY INSTRACTION
Please read this user manual carefully and save it for future reference.
Do ot make unauthorized alterations to the product, doing so may compromise
safety, regulatory compliance, system performance, and may void the warranty.
- Avoid dropping.
- Do not disassemble.
- Do not submerge in water
- Avoid extreme temperatures.
- Do not use the device outdoors during thunderstorms.
- Use original or certified cables.
- Do not place dangerous items on top of this device (e.gliquid filed objects, lit candles)
- Clean with a dry, soft lint-free cloth. Do not use any corrosive cleaner or oil.
- To avoid hearing damage, do not listen for extended periods at high volume.
- Do not expose the batteries to extreme heat sources suchas direct sunlight or open flames.
- The ideal operating temperature for this product and its accessories is between 41°F/5°C and 95°F/35°C.
- The adapter should be installed near the device andshould be easily accessible.
- Do not use this product in environments of extreme heat or cold. Never expose this device to strong sunshine or wet environments.
PROPER DISPOSAL INSTRUCTION
** This mark shown on the product o its packaging, indicates that this
product should not be disposed of with other household waste at the end of its
working life.
Toprevent possible harm to the environment or human health from uncontrolied
waste disposal, please separate this from other types of wastes and recycle it
responsibly o promote the sustainable reuse of material resources.
Waste Electrical & Electronic Equipment**
Household user should contact either the retailer where they purchased this
product, or their local government office, for details of where and how they
can take this item for environmentally safe recycling.
Business users should contact their suppliers and check the terms and
conditions of the purchase contract. This product should not be mixed with
other commercial wastes for disposal.
FCC REGULATORY COMPLIANCE
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not ocour in a
particular installation. If this equipment does cause.
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct
the interfer. ence by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
‘This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna o transmitter.
ISED WARNINGS
This device contains licence-exempt transmitter (s) / receiver (s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS (s). Operation s subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
This equipment complies with IC exposure limits set forth for an uncontrolled
environment. This equipment shall be installed and operated with a minimum
distance of 20cm between the radiator & body.
Declaration of Conformity
We (Manufacturer is responsible for this declaration) Dynanic (Shenzhen)
Technology Limited (Company name)
20th Floor, Building 4, Tianan Cloud Park, Bantian St., Longgang District
Shenzhen, China 518000 (Company address)
Declare under our sole responsibility that the product Trade Mark: ULTIMEA
Product Name: Nova S40 2.1 Channel Soundbar with Separate Subwoofer
Model No.: U2100
To which this declaration relates is in conformity with the essential
requirement set out in the Council Directive on the Approximation of the laws
of the Member States relating to RED Directive (2014/53/EU) & RoHS (2011/
65/EU) product is responsible to affix CE marking, the following standards
were applied:
EN 55032:2015/A11:2020
EN 55035:2017/A11:2020
ENIEC 61000-3-2:2021
EN 61000-3-3:2013/A1:2021
ETSIEN 301 489-1 V2.2.3(2019-11)
ETSIEN 301 489-17 V3.2.4(2020-09)
EN 300 328 2.2.2(2019-07)
EN 50663:2017
ENIEC 62368-1:2020+A11:2020
IEC62321-3-1:2013
IEC 62321-4:2013+A1:2017
IEC 62321-5:2013
IEC 62321-6:2015
IEC 62321-7-1:2015
IEC 62321-7-2:2017
IEC 62321-8:2017
Full Name: Yoyo.Yu
Position: Approbation Manager
Signature: Place/Date: Shenzhen, China/Dec. 25-2022
Trade Marks: The Bluetooth® word mark and logos are registered trademarks
owned by Bluetooth SIG, Inc. and any use of such marks by Soundlab Technology
Co.,Ltd. is under license. Other trademarks and trade names are those of their
respective owners. The Adopted Trademarks HDMI, HDMI High-Definition
Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or
registered trademarks of HDMI Licensing Administrator, Inc. in the United
States and other.
Nova S40 2.1 Channel Soundbar with Separate Subwoofer
Model No.: U2100
Dynanic GmbH
Buchenring 57, 22359 Hamburg, Germany
UK Crossborder limited
7 Bell Yard London WC2A 2JR, UK United Kingdom
Made in China
Manufacturer: Dynanic (Shenzhen) Technology Limited
Address: 20th Floor, Building 4, Tianan Cloud Park, Bantian St.,
Longgang District, Shenzhen, China 518000 If you need our support, kindly
reach out to our service team. We are always glad to help.
+1 888-598-8875 (US)
Mon-Fri 9am-5pm (PST)
+49 89-628-25828 (EU)
Mon-Fri 9am-5pm (CET)
support@ultimea.com
support@ultimea.de
support.ultimea.com
support.ultimea.dehttps://web-u.shengcai.net/bnl7/H666G_WoSGG@ULTIMEA_OFFICIAL
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>