alpina 871125225433 Smart Wifi Bulb User Guide
- June 14, 2024
- alpina
Table of Contents
Smart WiFi Bulb
ITEM: 871125225433
Quick start up guide
https://a.smart321.com/alpinasmart
Safety information
When using electrical devices, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons including the following:
- Read all instructions before use and keep for future reference.
- Disconnect the product from the mains and other equipment if a problem should occur.
- Only use the device for its intended purposes. Do not use the device for other purposes than described in the manual.
- Children shall not play with the device.
- Keep the device out of reach of children less than 8 years.
- Do not use the device if any part is damaged or defective. If device is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
- The device is suitable for indoor use only. Do not use the device outdoors.
- Do not expose the product to water or moisture.
- Do not touch the device with wet hands.
- Do not attempt to repair the device. If the device does not operate correctly, replace it with a new device.
- Not suitable for dimmable switches.
Usage
-
Download and install the app “Alpina Smart” from Appie App Store or Google Play Store on your mobile device.
-
Launch the app “Alpina Smart’.
-
Create a new account or log in to your existing account.
-
Tap “+” to add the device.
-
Select the correct product from the list.
-
Screw in the smart bulb.
-
Switch on the power.
-
If the light does not flash: Switch the power to the smart bulb on – off – on – off — on. if the light flashes: Confirm in the app.
-
Confirm the Wi-Fi network and password.
Note: make sure to use the 2.4 GHz network instead of the 5 GHz network. -
Enter the device name.
Note: This name will also be used by Amazon Alexa and Google Home.
Specification
Model | A60-PA-WIFILIC-TY-RGBCW |
---|---|
Base | E27 |
Lamp shape | A60 |
Maximum power consumption | 9W |
Wattage equivalent | 60W |
Light colour | White + RGB |
Colour temperature | 2700-6500K + RGB |
Wireless technology | Wi-Fi |
Energy class | F |
Energy consumption per 1000 hours | 9kWh |
Rated luminous flux | 806lm |
Beam angle | 220′ |
Input voltage | 220-240VAC 50/60Hz |
Amperage | 75mA |
Number of switching cycles | Up to 15000 |
Frequency range | 2412-2472MHz |
Max RF output power | 15.1dBm |
Antenna gain | 2.5dBi |
Alpina smart app available for | Androidry & IOS |
**** The symbol above and on the product means that the product is classed as Electrical or Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life.
The Waste of Electrical and Electronic Equipment (WEEE) Directive has been put in place to recycle products using best available recovery and recycling techniques to minimise the impact the environment, treat any hazardous substances and avoid the increasing landfill. Contact local authorities for information on the correct disposal of Electrical or Electronic equipment.
A.|.&E. Adriaan Mulderweg 9-11
5657 EM Eindhoven, The Netherlands
Edco UK Ltd, 1st Floor Two Chamberlain Square
B3 3AX, Birmingham, UK