CLOUDY BAY LCOWS715SMBN Indoor and Outdoor Smart WiFi LED Wall Sconce Instruction Manual
- June 14, 2024
- Cloudy Bay
Table of Contents
CLOUDY BAY LCOWS715SMBN Indoor and Outdoor Smart WiFi LED Wall Sconce
Product Information:
- Product Name: LED Wall Mount Fixture
- Model Number : LCOWS715XXXXX
Product Usage Instructions:
- Pull the power supply wires out from the OUTLET BOX (A).
- Mount the MOUNTING Backplate (C) to the OUTLET BOX (A) using MOUNTING BRACKET SCREWS (E).
- Connect the BLACK SUPPLY WIRE (B) to the BLACK FIXTURE WIRE (D) using a wire nut.
- Connect the WHITE SUPPLY WIRE (B) to the WHITE FIXTURE WIRE (D) using a wire nut.
- Connect the FIXTURE GROUND WIRE (D) to the SUPPLY GROUND WIRE (B) using a wire nut.
- Place the FIXTURE BODY (F) on the fixture over the MOUNTING Backplate (C).
- Secure the FIXTURE BODY (F) with the FIXTURE MOUNTING SCREWS (H).
- Slide the ACRYLIC LENS (G) into the FIXTURE BODY (F).
SAFETY INSTRUCTION
- GENERAL:
- All electrical connections must be in accordance with local and National Electrical Code (N.E.C.) standards. If you are unfamiliar with proper electrical wiring connections, contact and obtain the services of a qualified electrician. Use UL or IEC approved wire only for input/output connections.
- Remove fixture and mounting components from the box, and make sure that no parts are missing, by referencing the illustration in the illustration instructions.
- DIMMING:
- This product is compatible with most common residential type dimmers.
- Dimming performance will depend upon dimmer, dimmer settings (dimmers with adjustments to brightness range ), wiring method, and number of LED modules.
- For best results, set dimmer position at maximum before adjusting to a lower light level.
- Turn power off before installation, inspection, or removal.
- Use all necessary precautions while performing this procedure.
- Consult a qualified electrician to ensure correct branch circuit conductor. Min 90°C supply conductors.
- Properly ground electrical enclosure. IT IS IMPERATIVE THAT THE OUTLET BOX BE PROPERLY GROUNDED.
- DO NOT REVERSE THE HOT AND NEUTRAL CONNECTIONS, OTHERWISE SAFETY WILL BE COMPROMISED.
- This Integrated LED Fixture has no lamp/bulb to replace.
PRODUCT CARE
After Sales Service
- Please discontinue to use product right away if product shows any visible defect and contact customer service.
- If there is any problem with our lights for non-human reasons, please contact customer service, we will send you brand new replacement without need to returning goods or full refund.
- If you are not completely satisfied with product after installation but prefer not to disassemble, contact with us right away, we will provide comparable compensations.
3-Year Limited Warranty
LIMITED WARRANTY:
This fixture is warranted to be free from defects in workmanship and material
for up to 3-years. Based upon reasonable household usage, when used in
accordance with package and included instructions. If this fixture does not
last for the time period guaranteed, manufacture will send you a replacement
fixture upon receipt of the returned fixture, register receipt, and proof of
purchase. To contact us, please email us at
smart@cloudybaylighting.com to find out
how to return the fixture. We are committed to making high quality products.
Returning the fixture will help us monitor and further improve product
quality. This replacement is the sole remedy available, and LIABILITY FOR
INCIDENTAL OR CONSEQUENTIAL DAMAGES IS HEREBY EXPRESSLY EXCLUDED
WIRING DIAGRAM
PRODUCT OVERVIEW
- A. Outlet Box
- B. Supply Wires
- C. Mounting Backplate
- D. Fixture wires
- E. Mounting Bracket Screws
- F. Fixture Body
- G. Acrylic Lens
- H. FIXTURE MOUNTING SCREWS
Please follow these steps for installation.
- Pull the power supply wires out from the OUTLET BOX (A), and mount the MOUNTING Backplate (C) to the OUTLET BOX (A) using MOUNTING BRACKET SCREWS (E).
- Connect the BLACK SUPPLY WIRE (B) to the BLACK FIXTURE WIRE (D) using a wire nut.
- Connect the WHITE SUPPLY WIRE (B) to the WHITE FIXTURE WIRE (D) using a wire nut.
- Connect the FIXTURE GROUND WIRE (D) to the SUPPLY GROUND WIRE (B) using a wire nut.
- Place the FIXTURE BODY (F) on the fixture over the MOUNTING Backplate (C) and secure with the FIXTURE MOUNTING SCREWS (H).
- Slide the ACRYLIC LENS (G) into the FIXTURE BODY (F).
QUESTIONS? COMMENTS?
SUGGESTIONS? COMPLAINTS?
Please contact with us through
smart@cloudybaylighting.com or
info@cloudybaylighting.com We will do our
best to make it right for you. Thank you very much!