POWER-LITE SFL200W LED Slimline Flood Light Instruction Manual

: June 14, 2024
: POWER-LITE

Table of Contents

POWER-LITE SFL200W LED Slimline Flood Light
Product Information
Charge Times (To full charge):
Important Safety Instructions
Installation Procedure
Cleaning Care
Charging
Diagram
Product Advantages and Features
Read User Manual Online (PDF format)
Download This Manual (PDF format)

POWER-LITE SFL200W LED Slimline Flood Light

Product Information

LED Slimline Flood Light

The LED Slimline Flood Light (model SFL200W-CR) is a high-quality lighting solution designed to provide certainty and illumination at the speed of light. With its portable and durable design, this flood light is suitable for various outdoor and indoor applications.

Important Safety Instructions:

Do not modify or dismantle the luminaire or replace accessories without confirming with the supplier first.
Only authorize qualified electricians to install the luminaire and ensure they follow the installation instructions.

Installation Procedure:

WARNING:

Switch off the power supply before installation.
Switch on the power supply only after complete installation and examination of the circuit.
Professional electricians should handle the installation and maintenance.

Before starting the installation, turn off the power supply, read the instructions carefully, and ensure you have all the necessary tools and accessories to complete the installation correctly.

Cleaning Care:

The floodlight can be cleaned with a clean dry cloth. Do not immerse it in water. Always switch off the power supply before cleaning.

Charging:

When charging, only use the provided charge lead. Insert the power cord into the connector on the underside of the work light to charge the batteries. The two flashing Red LEDs on the front of the light indicate that the item is charging. When the Red LEDs are static, it means that the battery is fully charged. (See below for charge times).

IMPORTANT NOTE: The unit cannot be operated while charging. Disconnect the charging lead from the product before operating the work light.

Charge Times (To full charge):

Wattage	1A	2A	3A
30W	10-11 hours	15-16.5 hours	3.5-4.5 hours
50W	5-6 hours	8-9 hours	5.5-6.5 hours

Diagram:

Switch
Portable Aluminium Die-casting
PC Lens

This product should be disposed of responsibly at the end of its life. Please recycle where facilities exist. Check with your Local Authority for recycling advice (Waste Electrical and Electronic Equipment).

Product Advantages and Features:

High-quality LED flood light
Slimline design
Durable and portable
Suitable for various outdoor and indoor applications

Important Safety Instructions

To ensure correct function and safety, please read and follow all instructions carefully before using the product:

Please do not modify or dismantle the luminaire or replace accessories without confirming with the supplier first.
Please authorise only qualified electricians to install the luminaire and ensure they follow the installation manual. Any improper installation might cause falling, electric shock, fire, or other injury, damage or hazard.
Please disconnect the power before installation or any maintenance of the lamp. Do not touch the power supply when the lamp is operating.
If the luminaire begins to smoke or emit odours, please
Never put anything on the product or hang anything on any part of this product.
When the product does not light:
- Ensure the unit is charged.
- Ensure it is switched on.
Always disconnect the product from the mains for at least 10 minutes allowing to cool down before any maintenance or adjustment.

Installation Procedure

WARNING

Switch off before installation.
Switch on only after complete installation and examination of the circuit.
Professional electrician for installation and maintenance only.

Turn Off the power supply before starting any installation. Read the instructions & check you have all the tools & accessories to complete the installation correctly.

Cleaning Care

The lamp can be cleaned with a clean dry cloth. Do not immerse it in water. Always switch off the supply before cleaning.

Charging

When charging, only use the charge lead supplied. Use the power cord provided to charge the batteries by inserting the power cord into the connector on the underside of the work light. The 2 flashing Red LEDs on the front of the light indicate that the item is charging. When the Red LEDs are static, this will indicate that the battery is fully charged. (see below for charge times).

IMPORTANT NOTE:

While charging, the unit CANNOT be operated.
Disconnect the charging lead from the product in order to operate this worklight.
CHARGE TIMES (To full charge)

	1A	2A	3A
30W	10-11	5-6	3.5-4.5
50W	15-16.5	8-9	5.5-6.5

Diagram

POWER-LITE-SFL200W-LED-Slimline-Flood-Light-
fig-2

Product Advantages and Features

Function shift:

1. 100% power
2. 60% power
3. 20% power
4. Emergency light

Backup time:

1.  **100% power:** 4 hours
2.  **60% power:** 9 hours
3.  **20% power:** 12 hours

High-lumen LED SMD with a 50,000hrs life span.
PC outdoor optical lens, high light transmittance.
High-quality aluminium magnesium alloy housing.

This product should be disposed of responsibly at the end of its life. Please recycle where facilities exist. Check with your Local Authority for recycling advice (Waste Electrical and Electronic Equipment).