POWER-LITE WP36W-CW LED Weatherproof Batten Instruction Manual
- October 30, 2023
- POWER-LITE
Table of Contents
INSTALLATION
MANUAL
LED WEATHERPROOF
BATTEN
WP18W-CW
WP36W-CW
Installation Instructions
Please read the following instructions carefully to ensure that the installation is carried out correctly. These instructions should be retained for future reference.
Specifications
| Model no. | WP12W | WP18W I | WP24W | WP36W | WP3OW | WP48W |
|---|---|---|---|---|---|---|
| Rated voltoge | 220-240V- | |||||
| Frequency | 50/60Hz | |||||
| Rated power | 12W | 18W | 24W | 36W | 30W | 48W |
| Lumens | 1000Im | 15001m | 2000lm | 30001m | 25001m | 40001m |
| Protection closs | II | |||||
| Protection | 1P65 |
Safety Instructions
- Use H07RN-F, 2 x 1.0mm² rubber cable.
- Luminaire should be installed by a registered electrician only, in accordance with national wiring codes. If the external flexible cable of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or their service agent in order to avoid a hazard.
- The power supply must be isolated prior to installation, maintenance, exchanging the LED chips or cleaning.
- Picture 1: Un-screw the gland.
- Use a screw driver to open the terminal box.
- Connect brown wire (L) to terminal L, blue wire (N) to terminal N and earth in accordance with wiring codes.
- Replace the terminal box cover.
1800 909 306
nedlandsgroup.com.au
sales@nedlandsgroup.com.au
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>