POWER-LITE ST-40W-CW-SE LED Solar Street Light Installation Guide
- October 30, 2023
- POWER-LITE
Table of Contents
ST-40W-CW-SE LED Solar Street Light
Installation Guide
Style A: Universal Support
1. Open the package, check whether the appearance of the lamp is in good
condition, and click the switch button to test whether the lamp is in good
condition.| 2. Put the lamp into the lamp pole and tighten the (6# hexagon
socket wrench).
---|---
| 
3. Loosen the screws on the universal support, adjust the appropriate solar
panel irradiation Angle, and then tighten the screws (adjust the Angle of 90°
– 0°).| 4. Adjust the appropriate exposure Angle of the light source, and
then turn on the switch button.
|
Style B: Wall Mounting Bracket
1. Open the package, check whether the appearance of the lamp is in good
condition, and click the switch button to test whether the lamp is in good
condition.| 2. Drill holes in the wall to fix metal expansion screws and fix
lamps on expansion screws.
---|---
|
3. Loosen the screws on the u-shaped bracket, adjust the appropriate solar
panel irradiation Angle, and then tighten the screws (adjust the Angle -90° –
+90°).| 4. Adjust the appropriate exposure Angle of the light source, and
then turn on the switch button.
|
Style C: Round Rod Support
1. Open the package, check whether the appearance of the lamp is in good
condition, and click the switch button to test whether the lamp is in good
condition.| 2 Fix the circular arc clasp and the lamp on the circular lamp
pole through screws, and lock the screws.
---|---
|
3. Loosen the screws on the u-shaped bracket and adjust Appropriate solar
panel exposure Angle, then tighten Screw (adjust Angle -90°- +90°).| 4.
Adjust the appropriate exposure Angle of the light source, and then turn on
the switch button.
|
Style D: Square Rod Bracket
1. Open the package, check whether the appearance at the lamp is in good
condition, and click the switch button to test whether the lamp is in good
condition.| 2. Fix the arc clasp and the lamp on the square lamp pole through
the screw, and lock the screw.
---|---
| 
3. Loosen the screws on the u-shaped bracket and adjust Appropriate solar
panel exposure Angle, then tighten Screw (adjust Angle -90°- +90°)| 4. Adjust
the appropriate exposure Angle of the light source. and then turn on the
switch button.
| 
1800 909 306
nedlandsgroup.com.au
****sales@nedlandsgroup.com.au
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>