TACSWAN D100 FoxFury Photography Scene Light System User Manual
- June 11, 2024
- TACSWAN
Table of Contents
**TACSWAN D100 FoxFury Photography Scene Light System User Manua
**
| HANDLE AND STAND ASSEMBLY| D100© PHOTOGRAPHY SCENE LIGH
---|---|---
D100 PHOTOGRAPHY SCENE LIGHT SYSTEM
P/N 700-DH-341| |
ITEMS INCLUDED
- D100© Photography Scene Light
- Handle and Stand
- anyard
- XTAR Battery Charger
- (2) Rechargeable 18650 Li-Ion Batteries
PHYSICAL CHARACTERISTICS
| DIMENSIONS | 4.13 x 5.13 x 8.11 in (105 x 130 x 206 mm) |
|---|---|
| WEIGHT | 0.9 lbs (408 g) 1.1 lbs (500 g) with provided 18650 Li-Ion |
Batteries
WARNINGS
Please fully charge the provided 18650 batteries before using the D100© for the first time.
Do not stare into the LEDs for long periods of time or from close range (less than 2 ft / 0.6 m)
While using any FoxFury product, please operate at safe speeds.
The D100© will become hot to touch after 20 min of continuous use. Please handle carefully by avoiding contact with the metal heatsink.
D100 PHOTOGRAPHY SCENE LIGHT HEAD
Back View
INSTALLATION
Install/Remove the D100 Photography Scene Light to the Handle and Stand.
-
Position the Light Head with Mounting Knobs bracket stand so parts are aligned. Loosen Mounting Knobs so the bolt shaft fits into the angled bracket slot.
-
Tighten the Mounting Knobs so that the Light Head is secure and notloose within the bracket.
-
To remove the Light Head, loosen the Mounting Knobs until the Light Head can spin freely. Pull the Light Head from the Bracket angled slots.
NOTE: Be careful not to fully loosen the Mounting Knobs as they are not retained in the Light Head.
BATTERY
- D100© requires two (2) 18650 batteries.
- Mixing of new and used, or different brand batteries, is not recommended as this could lead to leakage or explosion.
BATTERY INSTALLATION AND REPLACEMENT
- Slide the battery cover open and insert the battery according to the plus (+) and minus (-) symbol located inside of the battery compartment.
- Once batteries are installed, test the light’s performance by activating the Power/Mode Switch. Slide the battery cover back on.
CHARGING THE BATTERY
Refer to the instruction manual provided with the XTAR Battery Charger.
OPERATIONAL MODES
OPERATIONAL MODES
- Press and hold Power/Mode Button to turn the light ON.
- Press Power/Mode Button again to turn the light OFF.
| MODE | LUMENS | BATTERY LIFE |
|---|---|---|
| ON | 2,300 | 70 minutes |
WARRANTY AND OTHER INFORMATION
PRODUCT DURABILITY
CARE/CLEANING
Your FoxFury product is a professional tool. Regular maintenance and care of
your light will maximize performance for you. As needed, clean your FoxFury
product using a soft washcloth. Do not immerse.
ACCESSORIESACCESSORIES
- Rechargeable 18650 Li-Ion Battery, P/N 70-18650T
- Battery Charger, P/N 600-155
WARNINGS
FoxFury, LLC is not responsible for the incorrect use of any FoxFury Lighting
product.
- When used for extended periods of time the D100© will become HOT to the touch. Please use care when operating.
- Lights are strong enough to cause damage to the human eye.
- Do not stare into LEDs for long periods of time or from a close range (less than 2 ft / 0.6 m).
- FoxFury, LLC is not responsible for any injury or damage caused during the use of this product
- Usage of this product must be supervised by an adult when it is being used by a minor.
- Any FoxFury product should be operated at speeds safe enough to maneuver around surrounding obstacles.
- Do not use under the influence of drugs or alcohol.
ONE YEAR WARRANTY
FoxFury, LLC (“FoxFury”) warrants this product to be free from defects in
material for one year after purchase. Li-Ion batteries have a one year pro-
rated or 500 re-charge cycle pro-rated warranty, whichever the user reaches
firs
This warranty is given only to the original end user of the accompanying product. If you purchased a product from someone other than an authorized FoxFury reseller/distributor or if the product was used, (including but not limited to demo models, show models or refurbished product by someone other than FoxFury) prior to your purchase, you are not the Original Purchaser and the product that you purchased is not covered by this warranty. This warranty is VOID if this Product has been altered or modified in any way (including but not limited to attempted warranty repair without authorization from FoxFury and/or alteration/removal of the serial number). To expedite warranty concerns, we encourage the end user to register their FoxFury Product at www.foxfury.com/pages/warrantyregi stration.
THIS IS THE ONLY WARRANTY, EXPRESSED OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES ARE EXPRESSLY DISCLAIMED EXCEPT WHERE SUCH LIMITATION IS PROHIBITED BY LAW.
You may have other specific legal rights which vary by jurisdiction. Go to www.foxfury.com/pages/warranty for a complete copy of the warranty. Retain your receipt for proof of purchase
All FoxFury products are designed in Oceanside, CA. All FoxFury products are
manufactured with the highest quality USA and foreign parts. Products are
assembled in either FoxFury’s controlled plant in Asia or the USA, under
strict quality control.
CALIFORNIA PROPOSITION 65
This product can expose you to chemicals including Lead and DEHP, which are
known to the State of California to cause cancer and birth defects or other
reproductive harm.
For more information go to
www.P65Warnings.ca.gov.
CONTACT FOXFURY
FoxFury, LLC Oceanside, CA 92056 USA
Tel: 760.945.4231
Email: service@FoxFury.com
Web: FoxFury.com
