POWER-LITE LED-LPE28W-60SQ-CC LED Light Panel Installation Guide
- October 30, 2023
- POWER-LITE
Table of Contents
INSTALLATION MANUAL
LED PANEL
LED-LPE28W-60SQ-CC LED Light Panel
Product codes:
LED-LP36W-60SQ-A,LED-LP36W-60SQ-CW-A,LED-LP36W-120/30-A,LED-
LP36W-120/30-CW-A,
LED-LP36W-120/30, LED-LP36W-120/30-CW,LED-LP36W-60SQ,LED-LP36W-60SQ-CW,
LED-LP36W-60SQ-5K,LED-LP36W-120/30-5K,LED-LPE36W-60SQ,LED-LPE36W-60SQ-CW,
LED-LPE36W-120/30, LED-LPE36W-120/30-CW,LED-LPE36W-60SQ-5K,LED-
LPE36W-120/30-5K,
LED-LPE27W-30/60-WW,LED-LPE27W-30/60, LED-LPE27W-30/60-CW,LED-LPE27W-30/60-5K,
LED-LPE46W-120/60, LED-LPE46W-120/60-CW, LED-LPE36W-120/30-WW, UGR19
LPE18W-30/60, UGR19-LPE36W-60SQ, UGR19-LPE36W-120/30, PL-3060-18W,
PL-12030-28W,
PL-6060-28W,PL-60120-50W, LED-LPE28W-120/30-CC, LED-LPE28W-60SQ-CC, LED-
LPE50W-120/60-CC
Installation Instructions:
This installation must be carried out by an electrician. Please read these instructions carefully before installation. Leave a copy for the user/maintenance engineer for future reference.
Safety:
This is a mains powered product. Before installation, maintenance or cleaning please ensures the power supply is isolated.
Maintenance:
a. Please ensure the fitting has cooled down prior to performing maintenance
on this product.
b. If the product is not damaged in transport, it is supplied ready to use.
c. Clean using a dry cloth. No detergent or water to be used.
Notes:
Widen Voltage input: AC100-240V/50/60Hz, using the newest high efficiency
constant current driver. Anti-electromagnetic interference, no mercury, no
lead. Before using, please confirm that this product has not been damaged
during transit.
Please keep packing material and small accessories far away from children.
Avoid the eyes sighting the LED light-emitting area directly.
Please keep products and packing away the open fire or high temperature goods.
The fixture must not be modified. And modification will void the warranty and
can make the product dangerous.
Please note the recommended clearance from the rear heat sink to any flammable
materials is 0.2m. Under no circumstance should any insulation or similar be
laid onto the fitting.
Ensure that LED driver is free of ceiling insulation.
Application:
Hotel, meeting room, factory or office, residence or public facilities,
commercial use, school, hospital and other environments.
LED panel light for indoor using only.
Installation Steps:
A. Built in Style:
| 1. Take off Ceiling plaster tablet. | 2. Connect the Wire. |
|---|
|
3. Fix the panel Light on into the ceiling screens.| 4. After steady the
panel light, you can connect the electric current to use.
| 
B . Ceiling style
1. Fix the ceiling frame into the ceiling or wall.| 2. Fix the panel light
on the ceiling frame.
---|---
|
3. Connect the wire(AC/DC Wire) and put the location well.| 4. After steady
the panel light, you can connect the electric current to use.
|
C Pendant style
1. Take off the cassette and install the screw cassette.| 2. Fix the
cassette onto the ceiling.
---|---
|
3. Lock the Line controler into the cassette.| 4. Adjust the length of the
iron line well and the connect the power supply, then you can power.
|
1800 909 306
nedlandsgroup.com.au
sales@nedlandsgroup.com.au
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>