POWER-LITE CDL12W LED Cyanosis Downlight Instruction Manual
- October 30, 2023
- POWER-LITE
Table of Contents
POWER-LITE CDL12W LED Cyanosis Downlight Instruction Manual
Important Safety Instructions
- Read through this manual before installation.
- Handle the product with care.
- The product belongs to Class I.If necessary, please connect the ground line to the plug screw.
- This product must be installed and maintained by certified electrician.
- Consult with the manufacturer before maintenance.
- Turn OFF the power before installation and maintenance.
- Make sure the products are securely installed.
- The housing might become hot after operation.
- Primary use high-bay luminaires for commercial and industrial buildings.
- Make sure the construction is strong enough to support the products.
- The product will automatically shut down once the temperature goes too high; and will automatically turn on once it cools down.
- The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire shall be destroyed.
- For non replacable lightsources:
- “ The light source of this luminaire is not replaceable; when the light source reaches its end of lift, the whole luminaire shall be replaced”
Dimensions (unit: mm)
Wiring Diagram
AC200-240V
-
Isolate the power
-
2. Cut the hole in the ceiling
Cut hole size:
3 inches Ø90-95mm
8 inches Ø200-210mm -
Properly connected to the electric power box. as shown in picture
-
Push both sides of the clips, insert into the ceiling hole
-
Turn on the power to the lighting circuit
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>