POWER-LITE LED Wall Light Ultra Slim Instruction Manual
- October 30, 2023
- POWER-LITE
Table of Contents
POWER-LITE LED Wall Light Ultra Slim
LED Wall Light Ultra Slim
The LED Wall Light Ultra Slim is a sleek and modern lighting fixture designed to be mounted on walls. It is available in different color temperatures that can be selected using the CCT change function. The luminaire contains a light source that should only be replaced by the manufacturer, his service agent, or a qualified person.
Important Safety Instructions
- Switch off the power supply before installation.
- Switch on the power supply only after complete installation and examination of the circuit.
- Installation and maintenance should be done by a professional electrician only.
- If the external flexible cable or cord of this luminaire is damaged, it should be replaced exclusively by the manufacturer, his service agent, or a qualified person to avoid hazards.
Installation Instructions
Follow these steps to install the LED Wall Light Ultra Slim:
- Turn off the power supply.
- Mount the fixture on the wall using screws or bolts.
- Connect the mains cable to the mains cable entry/entries (depending on the model).
- Connect the switched wire to the switch.
- Connect the earth wire to the earth terminal.
- Connect the neutral wire to the neutral terminal.
- Turn on the power supply only after complete installation and examination of the circuit.
For more information, contact our customer support through our
Free Call number, email or website provided below:
Free Call: 1800 909 306
Website: nedlandsgroup.com.au
Email: sales@nedlandsgroup.com.au
Free Call: 1800 909 306
Website: nedlandsgroup.com.au
Email: sales@nedlandsgroup.com.au
Important Safety Instructions
Basic safety precautions should always be followed when installing,
including the following:
- Read all instructions.
- Licensed electrician for installation only.
- Always ensure the power is OFF and the fitting has cooled down before performing any maintenance, cleaning, changing the globe or adjustment to the fitting.
- Do not install any luminaire near the heat source.
- Do not exceed the nominal supply voltage or amperage ratings.
- To avoid injury or damage to the fitting, please ensure that power leads and screws are secure before connecting the power.
Installation Instruction
WARNING
- Switch off before installation.
- Switch on only after complete installation and examination of the circuit.
- Professional electrician for installation and maintenance only
Wall mounted installation
