Wings Center Stage 3000 Soundbars User Manual
- June 14, 2024
- WINGS
Table of Contents
Wings Center Stage 3000 Soundbars User Manual
Introductions
Welcome to the Wings Soundbar System!
with all new Wings Center Stage 3000. We hope you are as excited as us to feel
and flaunt your latest soundgear.
But before you dive right in, we strongly recommend going through this user manual thoroughly as it contains important technical information to ensure you have a seamless audio experience with us. Once you are done reading the manual, we are sure you will be all set to.
FEEL IT!
FLAUNT IT!
What’s In The Box
PRODUCT SPECIFICATION
1- DC port
2- Bass interface
3- Optical fiber interface
4- Coaxial interface
5-AUX_RCA interface
6-AUX_3.5 interface
7-HDMI interface
8-Power/mode key
9-VOL – / previous key
10-Play/pause key
11-VOL + / next song
12-USB interface
1. Press the power ON button to switch ON and OFF the device
2. The treble“+”or“–“ button can adjust the treble volume Separately.
3. The volume“+”or “–“ button can control the total volume of the device.
4. The ” TRACK BACK” or TRACK NEXT” button can control the playing track
5. The “Pause”, “mute” buttons , press this button to pause or mute the
device respectively.
6. Sound mode keys; Use these keys to switch between different sound modes
7. The Bass “+” or “ –“ button can adjust the Bass volume Separately.
8. Mode key, press this key to switch different sound source input. To use
the wireless subwoofer, Long press the mode key and aim at the wireless
subwoofer, the Wireless subwoofer will be automatically connected.
BLUETOOTH PAIRING
1. Power ON the Device by holding “POWER” button for 2 sec.
2. Switch the audio to Bluetooth mode (use POWER button to switch modes).
3. Turn ON the Bluetooth on pairing device (mobile, tablet, etc) and search
for audio pairing name “Center Stage 3000”, select the pairing name to pair.
The device is now successfully connected in Bluetooth mode.
4. Long press the (play) button to disconnect and reconnect the Bluetooth
device.
Music and Volume Control
1. Play/ Pause : Press the “PLAY / PUSE” button to play or pause the music
2. Increase the volume : Long Press the “+” button to increase the volume.
3. Decrease the volume : Long Press the “-” button to decrease the volume.
4. Next Song : Short Press the “+” button to skip to next song.
5. Previous Song : Short Press the “-“ button to skip to previous song.
USB MODE
1. Power ON the Device and insert the USB in the USB port of the device.
2. The Device will automatically detect the USB and will start playing the
media on the USB.
(Some models need to manually press the key to switch to the USB mode to play. If it does not play, please check whether there are MP3 media files in the USB. The file system format of the USB flash drive is FAT32, and the system format other than FAT32 is not supported. The USB flash drive supports up to 32GB).
AUX MODE
AUX Input
Plug the 3.5 mm jack of the AUX cable in the AUX input of the device. Press the “ POWER ” button to switch to AUX 1 mode to play music via AUX.
AUX RCA Input
Plug the respective inputs of the RCA cable in the RCA port of the device. Press “ POWER ” the button to switch to AUX 2 RCA mode to play music via RCA.
COAXIAL MODE
Plug the device into the digital signal line of COAXIAL, and press the “ POWER ” button to switch to COAXIAL mode to play music via COAXIAL mode.
(COAXIAL input is digital signal input, transmission equipment must have digital signal output, and its interface adopts coaxial cable with impedance of 75Ω as transmission medium. Because of constant impedance and wide transmission frequency band, it has better performance on sound quality.)
OPTICAL MODE
Plug in the OPTICAL digital signal line in the Optical input of the device and press “ POWER ” the button to switch to the OPTICAL mode to play music via OPTICAL mode.
(The principle of OPTICAL input is similar to that of COAXIAL input, except that the transmission carrier is different, and its interface uses glass or plastic fiber as the transmission medium.)
HDMI MODE
Plug the device into the HDMI Cable and press “ POWER ” the to HDMI mode to play music via HDMI mode.
(HDMI supports multiple modes and protocols. at present, our products only support ARC mode. ARC is called Audio Return Channel, which means audio return channel. Its function is to transmit sound signals.)
TECHNICAL SPECIFICATIONS
- Adapter: 20V/2A
- Rate power: 25W*4+60W(SUB)
- Distortion: ≤10%
- Signal to noise ratio: ≥90db
- Frequency response range: 50HZ-20KHZ
- Loudspeakers: 2.25″ 25W (4PCS)
SAFETY INSTRUCTIONS
Please read below suggestions in order to helping prolong the product lifespan and clearly understand the warranty clauses:
- Keep the product dry, do not put it in humid conditions to avoid short circuit.
- Do not expose it to the peak sun or high heat for extended period of time as this will short lifespan of electronic components, damage battery and deform some plastic parts.
- Do not put it in cold circumstance to avoid damage to PCB board.
- Do not attempt to dismantle the product, as it maybe unsafe especially for non-professionals.
- Do not use chemical products, detergent, oily liquids to clean the item.
- Do not scratch the surface with sharp items to avoid damaging the case and appearance.
Note: Any damage to the product that is not manufa-cturing defect will lead to warranty being rendered null and void. Therefore, please take utmost care of your product.
DOWNLOAD
Wings Center Stage 3000 Soundbars User Manual – [Download PDF]
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>