WINGS Center Stage 1000 Soundbar User Manual

WINGS Center Stage 1000 Soundbar

Wings Soundbar System – Center Stage 1000

WINGS LOGOCongratulations on your new Wings Soundbar System – Center Stage 1000. This soundgear provides exceptional audio quality and is easy to use. Before you start using it, we recommend that you read this manual carefully as it contains important technical information to ensure you have a seamless audio experience with us.

Product Specification

The Wings Soundbar System – Center Stage 1000 has the following input/output options:

• DC-IN
• SUB
• OPT
• COAX
• R AUX
• L AUXIN
• ARC INPUT
• ARC OUTPUT
• DC port
• Bass interface
• Optical fiber interface
• Coaxial interface
• AUX_RCA interface
• AUX_3.5 interface
• HDMI interface
• Power/mode key
• VOL – / previous key
• Play/pause key
• VOL + / next song
• USB Interface

The product also has the following input options:

• DC Port
• Bass Interface
• Optical Fiber Interface
• Coaxial Interface
• AUX_RCA Interface
• AUX_3.5 Interface
• HDMI Interface

Bluetooth Pairing

To connect your device via Bluetooth, follow these steps:

1. Hold the power/mode key for 2 seconds to turn on the device.
2. Press the button to switch to Bluetooth mode.
3. Turn on Bluetooth on your pairing device (mobile, tablet, etc.) and search for “Center Stage 1000” to pair.
4. To disconnect and reconnect your Bluetooth device, long press the play button.

Music and Volume Control

To control music and volume, follow these steps:

• To play or pause music, press the play/pause button.
• To increase the volume, long press the + button.
• To decrease the volume, long press the – button.
• To skip to the next song, short press the + button.
• To skip to the previous song, short press the – button.
• Play/ Pause : Press the button to play or pause the music
• Increase the volume : Long Press the “+” button to increase the volume.
• Decrease the volume : Long Press the “-” button to decrease the volume.
• Next Song : Short Press the “+” button to skip to next song.
• Previous Song : Short Press the “-“ button to skip to previous song.

USB Mode

To play media via USB, follow these steps:

1. Turn on the device and insert the USB in the USB port.
2. The device will automatically detect the USB and start playing the media.
3. Power ON the Device and insert the USB in the USB port of the device.
4. The Device will automatically detect the USB and will start playing the media on the USB.

Note : Some models require you to manually switch to USB mode. Ensure that there are MP3 media files in the USB. The file system format of the USB flash drive should be FAT32, and the system format other than FAT32 is not supported. The USB flash drive supports up to 32GB. (Some models need to manually press the key to switch to the USB mode to play. If it does not play, please check whether there are MP3 media files in the USB. The file system format of the USB flash drive is FAT32, and the system format other than FAT32 is not supported. The USB flash drive supports up to 32GB).

AUX Mode

To play music via AUX, follow these steps:

AUX Input

1. Plug the 3.5 mm jack of the AUX cable into the AUX input of the device.
2. Press the button to switch to AUX 1 mode to start playing music via AUX.

AUX RCA Input

1. Plug the respective inputs of the RCA cable into the RCA port of the device.
2. Press the button to switch to AUX 2 RCA mode to start playing music via RCA.

COAXIAL Mode
To play music via COAXIAL mode, follow these steps: Plug the device into the digital signal line of COAXIAL, and press the button to switch to COAXIAL mode to play music via COAXIAL mode

1. Plug the device into the digital signal line of COAXIAL.
2. Press the button to switch to COAXIAL mode to start playing music via COAXIAL.

Note : COAXIAL input is a digital signal input, and the transmission equipment must have digital signal output. Its interface adopts coaxial cable with impedance of 75 as a transmission medium.

OPTICAL Mode
To play music via OPTICAL mode, follow these steps:

1. Plug in the OPTICAL digital signal line in the Optical input of the device.
2. Press the button to switch to OPTICAL mode to start playing music via OPTICAL mode.

Note : The principle of OPTICAL input is similar to that of COAXIAL input, except that the transmission carrier is different, and its interface uses glass or plastic fiber as the transmission medium.

INTRODUCTION

Welcome to the Wings Soundbar System! with all new Wings Center Stage 1000. We hope you are as excited as us to feel and flaunt your latest soundgear. But before you dive right in, we strongly recommend going through this user manual thoroughly as it contains important technical information to ensure you have a seamless audio experience with us. Once you are done reading the manual, we are sure you will be all set to. FEEL IT! FLAUNT IT!

What’s In The Box

• 1x Soundbar
• 1x 3.5mm to RCA Cable
• 1x Wall- Mounted Screws
• 1x Wall-Mounted Bracket
• 1x User Manual
• 1x Power Adapter
• 1x Remote Control

REMOTE CONTROL

1. Press the power ON button to switch ON and OFF the device
2. The treble”+”or-” button can adjust the treble volume Separately.
3. The volume”+”or “-” button can control the total volume of the device.
4. The and button can control the playing track
5. The “Pause”, “mute” buttons, press this button to pause or mute the device respectively.
6. Sound mode keys; Use these keys to switch between different sound modes
7. The Bass +” or “-” button can adjust the Bass volume Separately.
8. Mode key, press this key to switch different sound source input.

BLUETOOTH PAIRING

1. Power ON the Device by holding button for 2 sec.
2. Switch the audio to Bluetooth mode (use button to switch modes).
3. Turn ON the Bluetooth on pairing device (mobile, tablet, etc) and search for audio pairing name “Center Stage 1000”, select the pairing name to pair. The device is now successfully connected in Bluetooth mode.
4. Long press the (play) button to disconnect and reconnect the Bluetooth device.

HDMI MODE
Plug the device into the HDMI Cable and press the button to switch to HDMI mode to play music via HDMI mode. (HDMI supports multiple modes and protocols. at present, our products only support ARC mode. ARC is called Audio Return Channel, which means audio return channel. Its function is to transmit sound signals.)

TECHNICAL SPECIFICATIONS

• Adapter : 20V/2A
• Rate power : 20W*4(80Watt)
• Distortion : ≤10%
• Signal to noise ratio : ≥90db
• Frequency response range: 50HZ-20KHZ
• Loudspeakers : 2.25″ 20W (4PCS)

SAFETY INSTRUCTIONS

Please read below suggestions in order to helping prolong the product lifespan and clearly understand the warranty clauses:

• Keep the product dry, do not put it in humid conditions to avoid short circuit.
• Do not expose it to the peak sun or high heat for extended period of time as this will short lifespan of electronic components, damage battery and deform some plastic parts.
• Do not put it in cold circumstance to avoid damage to PCB board.
• Do not attempt to dismantle the product, as it maybe unsafe especially for non-professionals.
• Do not use chemical products, detergent, oily liquids to clean the item.
• Do not scratch the surface with sharp items to avoid damaging the case and appearance.

Note : Any damage to the product that is not manufacturing defect will lead to warranty being rendered null and void. Therefore, please take utmost care of your product

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>