WINGS V19A True Wireless Earbuds User Manual
- June 5, 2024
- WINGS
Table of Contents
WINGS V19A True Wireless Earbuds
Introduction
Welcome to the Wings True Wireless Generation with the all new Wings Slay. We
hope you are as excited as us to feel and flaunt your latest soundwear.
But before you dive right in, we strongly recommend going through this user
manual thoroughly as it contains important technical information to ensure you
have a seamless audio experience with us. Once you are done reading the
manual, we are sure you will be all set to.
FEEL IT! FLAUNT IT!
What’s In The Box
- 1x User Manual
- 2x Bluetooth Earphones
- 1x Portable Charging Case
- 4x Ear Cushions
- 1x USB Charging Cable
How To Pair
Step 1: Take out both the earbuds from the charging case. They will
automatically power on.
Step 2: Please wait for 3 seconds. The earbuds will automatically pair
with each other. The earbuds will flash red and white to indicate it has
entered pairing. You will hear a voice prompt “Pairing”.
Step 3 : Turn on the Bluetooth on your mobile and pair with the device
name “Wings Slay”.
Step 4: Congratulations! You are now connected and can start playing
media.
Single Earbud Usage
Step 1: Take out any one earbud from the charging case.t will
automatically power on.
Step 2: Please wait for 3 seconds. The earbud will flash red and white to
indicate it has entered pairing mode.
Step 3: Turn on the Bluetooth on your mobile and pair with the device
name “Wings Slay”.
Step 4 Congratulations! You are now connected and can start playing
media.
Note: Anyone earbud (left or right) can be used in mono mode.
Note: During mono mode usage, at any time, you can take out the other
earbud also and it will autoconnect and move into dual mode.
Touch Controls Usage
Play/Pause: Short press the multifunction button on any earbud to play or
pause music.
Changing Songs: Double press the multifunction button on right earbud to go to
next song. Double press the multifunction button on left earbud to go to
previous song.
Adjusting Volume: Triple press the multifunction button on the right
earbud to increase volume. Triple pre the multifunction button on left earbud
to decrease volume.
Siri/Google Assistant: Long press the multifunction button on any earbud for 2
seconds to activate voice assistant. Double press the multifunction button to
close the function.
Note: Changing song and adjusting volume functions cannot be used in mono
mode.
Call Controls
Answer Incoming Call: Short press the multifunction button on any earbud to
answer an incoming call. Reject Incoming Call: Short press the multifunction
button on any earbud for 2 seconds to reject an incoming call.
Hang Up After Call: Short press the multifunction button on any earbud for 2
seconds to end an active call.
Put Active Call On Hold And Answer 2nd Call: Double press the multifunction
button on any earbud to switch calls.
Charging Function
Charging the Earbuds: Place the earbuds back into the charging case. The LED
light on both earbuds will get lit to indicate they are charging. Ones fully
charged, both the lights will go off.
Low Battery Warning: When the battery Ievel on the earbuds is low, you will
hear a voice prompt “Low battery, please charge” Please place the earbuds back
into the charging case to charge them immediately.
Case Charging Light Indicators:
- -Both LED are off
- 20% – LED 1 lashes fast. LED 2 is off
- 40% LED 1 flashes slowly. LED 2 is off
- 60% -LED 1 stays on. LED 2 flashes fast
- 80% -LED 1 stays on. LED 2 flashes slowly
- 100%- Both LED stay on
Resetting The Device
Please follow the below steps in case the left and right earbuds do not
autopay with each other (Lights of both start blinking white and red)
Step 1: Remove “Wings Slay” from the list of paired devices on your
mobile and switch off your mobile Bluetooth.
Step 2: Take out both earbuds from the case and Iong press the
multifunction button on both earbuds for 5 seconds to manually power them off.
Step 3: In the “Power Off” mode, long-press the multifunction button on
both earbuds for 10 seconds.
Step 4: LED will flash red and white twice quickly and go off. In the
voice prompt, you will hear 3 Deeps sound.
Step 5: Put both the earbuds back in to the case.
Step 6: Take out both earbuds from the case. They will now auto pair with
each other.
The reset process is now complete and you can start the pairing process again.
Technical Specifications
- Bluetooth Version: V5.0
- Profile Support: HSP, HFP, A2DP, AVRCP
- Stand-by Time: 120 hours
- Talk Time: 3 hoursS
- Music Play Time: 3-4 hours
- Charging Time: 1.5 hours
- Charging Voltage: DC 5V
- Frequency Range: 2.402G – 2.480G
- Ambient Temperature: -20°C/ +60°C
- Transmission Distance: 10m
- Earbuds Battery capacity: 40mAh / 3.7V
- Charging Case Battery Capacity: 47OmAh / 3.7V
- Driver Unit: 6mm
- Sensitivity: 96dB+/-3dB
- Impedance: 160 +/-10%
- Frequency Response: 20Hz – 20000Hz
- FCC ID: 2AB9S-V19A
Safety And Maintenance
Please read the below suggestions in order to helping prolong the product lifespan and clearly understand the warranty clauses:
- Keep the product dry, do not put it in humid conditions to avoid short circuit.
- Do not expose it to the peak sun or high heat for extended period of time as this will shorten the lifespan of electronic components, damage the battery and deform some plastic parts.
- Do not put it in cold circumstances to avoid damage to PCB board.
- Do not attempt to dismantle the product, asit may be unsafe, especially for non-professionals.
- Do not use chemical products, detergents, oily liquids to clean the item.
- Do not scratch the surface with sharp items to avoid damaging the case and appearance.
- Do not charge the case for more than 5 hours to avoid los in battery life.
- Avoid hearing music at maximum volume for long periods of time as this can affect your hearing and is not advisable.
- Note: Any damage to the product that is not a manufacturing defect will lead to the warranty being rendered null and void. Therefore, please take utmost care of your product.
FCC Statement
- This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
- Changes or modifications not expressly approved by the party res possible for complian ce could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirements.
The device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>