SMBT0626 Wings Headphones pro User Manual
- June 6, 2024
- WINGS
Table of Contents
Headphones/ Wings Headphones, Wings Headphones pro
User manual
Please charge the storage bin before use.
- USB micro charger port is used for charging(Figure 1)
- Wireless charging. Correctly place the back of the battery charging in the center point of the wireless charging.
Notes: Please correct use 5V-5.5V DC battery charger for the charging of storage bin in order to avoid the product damages.
Mobile phone connection
- The blue indicator lamps of the left and right earphone flash at the same time after the uncapping and initial connection of Android system mobile phone. Please turn on the mobile Bluetooth to search the equipment name “Wings Headphones” to enjoy the music when the rest earphone flashes.
- Connection method of iOS system mobile
- Method 1:The blue indicator lamps of the left and right earphones flash at the same time after the uncapping and initial connection of Android system mobile phone. Please turn on the mobile Bluetooth to search the equipment name “Wings Headphones” to enjoy the music when the rest earphone flashes.
- Method 2: Place the product close to IOS system mobile phone. There will prop up the connection interface for some IOS mobile phones after uncapping. Click connection. You can enjoy the music after connection success.
Notes: Please return the earphone into the storage bin if the pairing is
not successful. The earphone will restart and enter TWS double earphone
pairing after uncapping.
The Bluetooth earphone will be automatically connected to the mobile phone
after uncapping before use each time as long as the mobile phone Bluetooth is
turned on.
Operation function(diagram)
Sound volume +/-: Long press the left sound volume– and the right sound volume
+.
Music switch: Touch the left twice to switch to the previous song and touch
the right twice to switch to the next song.
Answer/hang-up: Single touch to answer the phone in calling and touch twice
continuously to hang up.
Call reject: Double click to reject the calls for the incoming calls.
Play/pause music: Single click to pause or play music
Start Siri(IOS): Click for three times to start siri and then click once to
close siri in any case.
Wear detection function
- Some mobile phones will automatically play the music when you wear the left and right earphones and automatically pause the music when you take out the earphones.
Notes: The inductor will be valid when you wear it on the ears tightly for use.
Maintenance and use
- Use environment: -40°–75°. Do not place it in humid place or expose it in the sunlight.
- Prevention of water splash: Do not wear the earphones in rainy days. Otherwise, the water may enter the hole of the earphones and cause the component damage.
- Compression: Do not press the product forcibly in order to prevent the scratches of the display screen and appearance.
- Falling from high altitude: Do not drop the product from the height above 1 meter in order to prevent the structure splitting.
- Please charge the battery if it is not used for long term in order to prevent the battery emptying and battery damages.
FCC Caution.
(1)§ 15.19 Labelling requirements. This device complies with part 15 of the
FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation. § 15.21 Changes or modification warning Any Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment. § 15.105 Information
to the user.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>