WINGS WL-ELEVATE-TEAL Elevate Neckband Wireless Earphones User Manual
- June 7, 2024
- WINGS
Table of Contents
Neckband Wireless Earphones
USER MANUAL
Introduction
Welcome to the Wings Wireless Generation with the all-new Wings Elevate
Bluetooth 5.0. We hope you are as excited as us to feel and flaunt your latest
sound wear.
But before you dive right In, we strongly recommend going through this user
manual thoroughly as it contains important technical information to ensure you
have a seamless audio experience with us once you are done reading the manual,
we are sure you will be all set to
FEEL IT! FLAUNT IT!
How To Pair
Step 1: Press and hold the multifunctional button for 3 seconds until the
LED starts flashing red and blue to indicate it has entered pairing mode.
Step 2: Turn on the Bluetooth on your mobile and pair it with the device
name “Wings Elevate”.
Step 3: Congratulations! You are now connected and can start playing
media.
Note: The LED light will slowly flash only blue to indicate it is
currently connected to a device.
Note: To Power off press and hold the MFR for3 seconds until It Bashes
red once and then powers off.
Dual Pairing: These earphones come with a dual pairing option so you can
connect to your laptop and mobile at the same time and seamlessly switch
between the 2 for music and /or call.
Music Control
Play/Pause: Single-click the multifunctional button to play or pause
music.
Adjusting Volume: Single-click the ‘+’ button to Increase volume. Single-
click the ‘-‘ button to decrease volume.
Changing Songs: Long press the ‘+’ button to go to the next song. Long
press the button to go to the previous song.
Siri/Google Assistant: Press and hold the multifunction button for 1
second and then release it to activate Google assistant/Siri on your mobile.
Call Controls
Answer Incoming Call: Single click the multifunctional button to answer
incoming calls.
Reject Incoming Call: Long press the multifunctional button for I second
to reject an incoming call.
Hang up after call: Single click the multifunctional button to end an
active call.
Charging Function
Charging the Earbuds : Plug in the USB cable into the charging port to
charge the earphones. The LED light will stay red to indicate it’s charging.
Once fully charged, the LED light will turn blue. Please take out from
charging and start using the earphones now.
Low Battery Warning: When the battery level on the earbuds is low, you
will hear a sound prompt. Please put the earphones for charging Immediately.
Fast Charging Battery: These earphones come with a fast-charging battery.
Within 20 minutes, they get charged up to 70% and can give up to 6-hour
playtime.
Note: Please do not use more than 5V output plug points to charge as it
can cause damage to the case and will affect battery life.
Technical Specifications
Bluetooth Version: V5.0
Profile Support: HSP, HFP, A2DP, AVRCP
Talk Time: 8-10 hours Music Play Time: 8-10 hours
Charging Time:1 hours Charging
Voltage: DC 5V
Frequency Range: 2.402G – 2.480G Ambient
Temperature: -20°C 1+60°C
Transmission Distance:10m Earbuds Battery Capacity: 110mAh / 3.7V Driver
Unit:10 mm dynamic, neodymium magnet Sensitivity: 98dB +/- 3dB Impedance: 16f1
+1-10% Frequency Response: 20Hz – 20000Hz
Safety And Maintenance
Please read the below suggestions in order to help prolong the product lifespan and clearly understand the warranty clauses.
- Keep the product dry, do not put it in humid conditions to avoid short circuits.
- Do not expose it to the peak sun or high heat for an extended period of time as this will short lifespan of electronic components, damage battery, and deform some plastic parts.
- Do not put it in cold circumstances to avoid damage to the PCB board.
- Do not attempt to dismantle the product, as it may be unsafe especially for non-professionals.
- Do not use chemical products, detergents, oily liquids to clean the item.
- Do not scratch the surface with sharp items to avoid damaging the case and appearance.
- Do not charge the case for more than 5 hours to avoid loss in battery life.
- Avoid hearing music at maximum volume for long periods of time as this can affect your hearing and is not advisable.
Note: Any damage to the product that is not a manufacturing defect will lead to the warranty being rendered null and void. Therefore, please take utmost care of your product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>