WINGS BH462A Neckband Wireless Earphones User Guide
- June 6, 2024
- WINGS
Table of Contents
WINGS BH462A Neckband Wireless Earphones
Pair
Mode 1Auto
ON / OFF
Music
Call
Charge
| Please keep the charging port dry before charging
---|---
Dual-point Connection
-
Turn on the Wings Bluetooth headphones and Wings will automatically enter the pairing mode, in which light flashes red and blue.
-
Firstly, pair the Bluetooth headphones to phone A successfully.
-
Then, turn off the Bluetooth function of phone A, and the headphones will automatically enter into pairing mode again, in which light flashes red and blue.
-
Next, turn on the Bluetooth function of phone B, and select Wings to pair successfuly.
-
Finally, turn on the Bluetooth function of phone A and select the Wings to pair successfully.
-
Now, both phones have been connected with the Wings Bluetooth headphones.
Tips
The correct way to retract the wire To prolong the lifespan of the headset, please hold the wire with your hands to make it retract slowly when you press both Earbuds Retract Buttons. You can follow the steps shown below.
-
Hold the wire with your hands.
-
Press both Earbuds Retract Buttons with your forefingers.
-
Slowly retract the wire.
-
Press both Earbuds Retract Buttons again to let the rest of the wire and earbuds to retract.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>