WINGS Powerpods True Wireless Earbuds User Manual
- June 5, 2024
- WINGS
Table of Contents
USER MANUAL
Introduction
Welcome to the Wings True Wireless Generation with the all-new Wings PowerPods. We hope you are as excited as us to feel and flaunt your latest sound wear. But before you dive right in, we strongly recommend going through this user manual thoroughly as it contains important technical information to ensure you have a seamless audio experience with us. Once you are done reading the manual, we are sure you will be all set to.
FEEL IT! FLAUNT IT!
2x Bluetooth Earbuds
lx Portable Charging Case| 1x User Manual
lx Charging Cable
---|---
|
Overview Of Headset
Step 1: Take out both the earbuds from the charging case. They will
automatically power on.
Step 2: Please wait for 3 seconds, the earbuds will automatically pair
with each other and you will hear a voice prompt “TWS CONNECTED”.
Step 3: Turn on the Bluetooth on your mobile and pair it with the
device name “Wings PowerPods”.
Step 4: Congratulations! You are now connected and can start playing
media.
Single Earbud Usage
Step 1: Take out any one earbud from the charging case. It will
automatically power on. Step 2:Turn on the Bluetooth on your mobile and pair
it with the device name “Wings PowerPods”. Step 3:Congratulations! You are now
connected and can start playing media.
Note: There is no master earbud and anyone earbud can be used in Mono
mode.
Note: During mono mode usage, at any time, you can take out the other
earbud also and it will auto connect and move to dual-mode.
Touch Controls Usage
Play/Pause: Single Touch the sensor on any one earbud to pause music.
Single Touch on any sensor again to resume playing music.
Changing Songs:
Double Touch the sensor n the right earbud to go to the next song. Double
Touch the sensor on the left earbud to go to the previous song.
Adjusting Volume:
Long Touch the sensor on the right earbud to go to increase volume. Long
Touch the sensor on the left earbud to go to decrease volume.
Siri/Google Assistant:
Triple Touch the sensor on the left earbud to activate the voice assistant.
Note: Changing songs and adjusting volume functions cannot be used in
mono mode.
Call Controls
Answer Incoming Call:
Single Touch the sensor on any earbud to answer an incoming call.
Reject Incoming Call:
Double Touch the sensor on any earbud to reject an incoming call.
Hang Up After Call:
Single Touch the sensor on any earbud to end an active call.
Game Mode
In-Game Mode, you will experience a lower lag between audio and video with a
slightly lower audio output. This mode is definitely to be used for playing
games and watching movies
Enter Game Mode:
Triple Touch the sensor on the right earbud. You will hear a voice prompt
“Game Mode”.
Exit Game Mode:
Triple Touch the sensor on the right earbud again. You will hear a voice
prompt “Music Mode”.
Charging Function
Charging the Earbuds:
Place the earbuds back into the charging case. Please make sure to close
the lid of the case to start charging the earbuds.
Charging the Case:
Take the USB charging cable. Plug in the micro USB end into the charging case
and the other end into a plug point. The LED screen will show “IN” along with
battery percentage to indicate the case is now being charged.
Note: Please do not use more than 5V output plug points to charge as it
can cause damage to the case and will affect battery life.
Power Bank Function : To charge your mobile using the case, plug the USB
end of the cable into the charging case and the other end to your mobile. The
LED screen will show “OUT” along with battery percentage to indicate the power
bank function is now active.
Low Battery Warning : When the battery level on the earbuds is low, you
will hear a voice prompt “BATTERY LOW”. Please place the earbuds back into the
charging case to charge them immediately.
Resetting The Device
Please follow the below steps when you see 2 “Wings PowerPods” in your
Bluetooth device’s menu on your mobile or you can hear music through only 1
earbud. This means the left and right buds have not auto-paired with each
other :
S tep 1: Switch off your mobile Bluetooth and remove “Wings PowerPods”
from the list of paired devices on your mobile.
Step 2: Take out both earbuds from the charging case.
Step 3: In the pairing state, Triple Touch the sensor on both earbuds.
You will hear the voice prompt “TWS Pairing”.
Step 4: If auto-pairing is successful, you will hear the voice prompt
“TWS Pairing Success”.
Step 5: Switch on your mobile Bluetooth and now you will be able to see
only 1 “Wings PowerPods”. Click on the device to connect. Reset process is
complete and you will be able to hear music through both earbuds.
Technical Specifications
Bluetooth Version : V5.0
Profile Support: HSP, HFP, A2DP, AVRCP
Stand-by Time: 2160h
Talk Time: 5-6 hours
Charging Time: 1 hour
Charging Voltage: DC 5V
Frequency Range: 2.402G – 2.480G
Ambient Temperature: -20°C / +60°C
Transmission Distance: lam
Earbuds Battery Capacity: 50mAh / 3.7V
Charging Case Battery Capacity: 2500mAh / 3.7V
Driver Unit: 8 mm
Sensitivity: 95dB 3 3dB
Impedance: 160 3 10%
Frequency Response: 20Hz – 20000Hz
Safety And Maintenance
Please read the below suggestions in order to help prolong the product lifespan and clearly understand the warranty clauses.
- Keep the product dry, do not put it in humid conditions to avoid short circuits.
- Do not expose it to the peak sun or high heat for an extended period of time as this will shorten the lifespan of electronic components, damage the battery, and deform some plastic parts.
- Do not put it in cold circumstances to avoid damage to the PCB board.
- Do not attempt to dismantle the product, as it may be unsafe, especially for non-professionals.
- Do not use chemical products, detergents, or oily liquids to clean the item.
- Do not scratch the surface with sharp items to avoid damaging the case and appearance.
- Do not scratch the surface with sharp items to avoid loss in battery life.
- Avoid hearing music at maximum volume for long periods of time as this can affect your hearing and is not advisable.
Note: Any damage to the product that occurs which is not a manufacturing defect will lead to the warranty being rendered null and void, Therefore, please take utmost care of your product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>