OPTONICA 9523 Lan To USB-A Adapter User Manual
- June 15, 2024
- OPTONICA
Table of Contents
OPTONICA 9523 Lan To USB-A Adapter
Product Information
| Product Name | LAN TO USB-A ADAPTER |
|---|---|
| SKU | 9523 |
| Product Features | 1000 Mbps Gigabit LAN to USB-A |
| Design | Unique design, Plug and Play |
| Mechanical Structures and Installations | wired network |
USB Port
RJ45 Port (illustration only)
Safety Information| Keep the device away from water, fire, humidity or hot
environments. Do not attempt to disassemble, repair, or modify the
device. Please read and follow the above safety information when
operating the device. We cannot guarantee that no accidents or
damage will occur due to improper use of the device. Please use
this product with care and operate at your own risk.
Importer| Prima Group 2004 LTD, Bulgaria, 1784 Sofia, Mladost 1, bl. 144,
Ground Floor; Phone: +359 2 988 45 72
Product Usage Instructions
This LAN to USB-A adapter is designed to provide a Gigabit LAN connection through a USB-A port. Follow the instructions below to use the adapter:
- Ensure that your computer is turned off.
- Locate an available USB-A port on your computer.
- Take the LAN to USB-A adapter and insert the USB connector into the USB-A port on your computer.
- Connect the LAN cable from your wired network to the RJ45 port on the adapter (refer to the illustration in the manual).
- Turn on your computer.
- The LAN to USB-A adapter supports Plug and Play feature. Once connected, wait for a few seconds for the adapter to be recognized by your operating system.
- If your operating system prompts you to install a driver for the adapter, follow the on-screen instructions and click to install the driver.
- Once the driver installation is complete, you can start using the LAN connection provided by the adapter.
Please note that while the adapter supports Plug and Play, some operating systems may require manual driver installation. Ensure that you have an active internet connection or access to the driver software before inserting the adapter.
1000 Mbps Gigabit LAN to USB-A Unique design, Plug and Play
MECHANICAL STRUCTURES AND INSTALLATIONS
NOTE
This adapter supports Plug and Play feature. Plug in and wait for seconds.
Then this adapter is ready to use.
For some operating systems, the adapter is not
plug-and-play. If you see a prompt page after inserting the adapter, just
click to install the driver.
SAFETY INFORMATION
- Keep the device away from water, fire, humidity or hot environments.
- Do not attempt to disassemble, repair, or modify the device.
- Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.
IMPORTER: Prima Group 2004 LTD, Bulgaria, 1784 Sofia, Mladost 1, bl. 144, Ground Floor; Phone: +359 2 988 45 72;
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>