ULTIMEA U2500 5.1 Channel Virtual Surround Soundbar User Manual

ULTIMEA U2500 5.1 Channel Virtual Surround Soundbar

Product Information

• Product Name: Poseidon D50
• Model Number: U2500
• Channel: 5.1
• Surround Sound: Virtual
• Contents: Soundbar, Subwoofer, Power Adaptor, Subwoofer Power Cable, Stereo 3.5mm to RCA Audio Cable, Stereo RCA to RCA Cable (6m), HDMI Cable, Digital Optical Cable, Remote Control, Wall Mounted Kit, Wall Bracket, Mounting Screw on Speakers, User Manual

Product Usage Instructions:

Connection and Installation:

1. Connect one end of the HDMI cable to the eARC/ARC port on the back of your TV.
2. Connect the other end of the HDMI cable to the ARC port of the soundbar.
3. Press the ARC button on the remote control to select ARC input.
4. Make sure to turn on the CEC function on your TV. This will allow your TV remote control to control both the soundbar and TV simultaneously.
5. If there is no sound, adjust the TV audio output to PCM by following these steps on your TV: TV Settings > Home > Settings > Sound > Digital Audio Output > PCM

Please note that for detailed setup guidance, you can refer to the video tutorial or user manual available on the ULTIMEA website.

If you have any further questions or need assistance, you can contact our support team via email at support@ultimea.com or visit our support website at support.ultimea.com. You can also reach us by phone at +1 888-598-8875 (US) or +49 89-628-25828 (EU) from Monday to Friday, 9am to 5pm (PST/CET).

Model No.: U2500
Poseidon D50 5.1 Channel Virtual Surround Soundbar

WE ARE READY TO HELP
support@ultimea.com

Prefer video tutorial?
Setup guidance video, or USER MANUAL on ULTIMEA website.
@ultimea_official

support.ultimea.com

+ 1 888-598-8875(US) Mon-Fri 9am- 5pm(PST)
+ 49 89-628-25828(EU) Mon-Fri 9am-5pm(CET)

ACCESSORIES LIST

SOUNDBAR CONTROLS

Control Panel

1. “ ”: Power Button
   Press to power on / Hold for 3 seconds to power off.

2. “ ”: Input Mode
   Press to switch channels: ARC-OPT(OPTICAL)-BT-AUX-USB.

3. “ ”: Bluetooth
   Press to switch to BT channel and enter pairing mode. Hold for 3 seconds to disconnect current device and choose to connect to a new device manually on your mobile phone / PC / TV (BT ID: Poseidon D50).

4. “ ”: Volume Down

5. “ ”: Volume Up

Remote Control

1. “ ” : Power Button
   Press to power on / Hold for 3 seconds to power off.

2. “ ” : ARC
   Press to switch to HDMI ARC channel.

3. “ ”: BT
   Press to switch to BT channel and enter pairing mode.
   Hold for 3 seconds to disconnect current device and choose to connect to a new device manually on your mobile phone / PC / TV (BT ID: Poseidon D50).

4. “ ”: OPT
   Press to switch to OPTICAL channel.

5. “ ”: AUX
   Press to switch to AUX channel.

6. “ ”: EQ
   Press to switch among Movie, Dialogue, Music mode, the display will show:
   “Eq 1”, “Eq 2”, “Eq 3”.

7. “ ”: USB
   Press to switch to USB channel.

8. “ ”: Volume Up

9. “ ”: Volume Down

10. “ ”: Previous
    For BT and USB mode only:
    Skip to previous track.

11. “ ”: Next
    BT and USB mode: Skip to next track.

12. “ ”: Play/ Pause
    For BT and USB mode only.
    USB mode: Hold for 3 seconds to switch between single loop playback and list loop playback.

13. “ ”: SURROUND
    Press to adjust surround sound level,the display will show:
    “ST-1”, “ST 0”, “ST 1”.

14. “ ”: BASSMX
    Press to adjust bass level, the display will show: “BS-3”, “BS-2”, “BS-1”, “BS 0”, “BS 1”.

15. “ ”: Mute / Recover the volume.

CONNECT TO TV VIA ARC

Steps 1:
Connect one end of the HDMI cable to the eARC / ARC port on the back of your TV.

Steps 2:
Then connect the other end to the ARC port of the soundbar.

Steps 3:
Press “ARC” button on the remote control to select “ARC” input.

Note: Please turn on the “CEC” function on your TV.

When ARC is connected, your TV remote control can control the soundbar and TV simultaneously:

1. Turn on/off
2. Adjust the volume

If there is no sound: try setting the TV audio output to PCM: TV Settings > Home > Settings > Sound > Digital Audio Output > PCM

CONNECT TO TV VIA OPTICAL / AUX

OPTICAL

1. Make sure the TV’s port is OPTICAL OUT, connect both sides of the cable to OPTICAL, for both the TV and the soundbar.
2. Make sure the optical plug is inserted correctly as it shows in the picture. Do not insert the plug upside down and break the optical.
   Note: If audio is playing from the internal TV speakers, mute or minimize the TV volume.

AUX

1. Connect the 3.5mm to 3.5mm Audio Cable to your TV’s AUDIO OUT port.
2. Not support AUDIO IN port on TV.
   Note: Please remember to unplug the AUX cable from TV and Soundbar when you want to switch to other mode.

In Optical Mode: If there is no sound, try setting the TV audio output to PCM: TV Settings > Home > Settings > Sound > Digital Audio Output > PCM

CONNECT TO BLUETOOTH

1. Press the “ ” button on the soundbar or remote control to enter Bluetooth pairing mode.
2. Open your phone’s Bluetooth settings, find and select “Poseidon D50” to connect the soundbar.

Note: If it’s already in the Bluetooth mode and connected, press and hold “ ” button for 3 seconds to disconnect the current device and connect to new device manually on your mobile phone / PC / TV.

CONNECT TO SUBWOOFER AND SURROUND SPEAKERS

1. Use the 6m RCA-RCA cables to connect the subwoofer and surround speakers, please pay attention to match the same color interfaces on the surround speakers with the corresponding ones on the subwoofer and place the surround speakers accordingly.
2. Use power cable to connect your subwoofer and power port.

PAIRING SUBWOOFER

The subwoofer has been paired with the soundbar by ULTIMEA.
If there is no sound coming from the subwoofer, you need to re-pair the Soundbar with the subwoofer.

Step 1:
Press and hold the “” button on the remote control for 5 seconds, the display will show “SUb” flashing.

Step 2:
Press and hold the ON / OFF button on subwoofer for 5 seconds, the white LED will be fast flashing.
The white LED will be always on when the subwoofer is paired successfully.

PLACEMENT OPTION

1. For a better listening experience, please choose one of the two placement options shown in the illustration above based on your home environment.
2. The soundbar and surround speakers should be placed at or near ear level.

WALL MOUNT INSTALLATION

Note:
Wall-mounted surround speakers follow the same configuration as shown in the above pictures

SPECIFICATIONS

Power Supply

| AC 100-240V, ~50/60Hz
Soundbar Drivers| 2.25″ × 3 (Soundbar) + 2.25” × 2 (Surround Speaker) + 5.25” (Subwoofer)
Frequency Response| 40Hz – 18kHz
Standby Power| ＜0.5W
Operating Temperature| 0°C – 45°C/32°F – 113°F
Dimensions and Weight

Soundbar| 400(W) × 70(H) × 90(D)mm| 15.7″ × 2.8″ × 3.5″
Subwoofer| 155(W) x 244(H) × 215(D)mm| 6.1″ × 9.6″ × 8.5″
Surround Speaker| 135(W) × 70(H) × 90 (D)mm| 5.3″ × 2.8″ × 3.5″
Packaging| 335(W) × 442(H) ×192(D)mm| 13.1″ × 17.4″ ×7.5″
Net Weight| 5.7kg / 12.6lbs
Gross Weight| 6.3kg / 13.9lbs

SAFETY INSTRUCTIONS

Please read this user manual carefully and save it for future reference.
Do not make unauthorized alterations to the product, doing so may compromise safety, regulatory compliance, system performance, and may void the warranty.

• Avoid dropping.
• Do not disassemble.
• Do not submerge in water
• Avoid extreme temperatures.
• Do not use the device outdoors during thunderstorms.
• Use original or certified cables.
• Do not place dangerous items on top of this device (e.g.liquid filled objects, lit candles).
• Clean with a dry, soft lint-free cloth. Do not use any corrosive cleaner or oil.
• To avoid hearing damage, do not listen for extended periods at high volume.
• Do not expose the batteries to extreme heat sources suchas direct sunlight or open flames.
• The ideal operating temperature for this product and its accessories is between 41°F/5°C and 95°F/35°C.
• The adapter should be installed near the device andshould be easily accessible.
• Do not use this product in environments of extreme heat or cold. Never expose this device to strong sunshine or wet environments.

PROPER DISPOSAL INSTRUCTIONS

This mark shown on the product or its packaging, indicates that this product should not be disposed of with other household waste at the end of its working life.
To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.

Waste Electrical & Electronic Equipment
Household user should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling.
Business users should contact their suppliers and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

FCC REGULATORY COMPLIANCE

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio / TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

ISED WARNINGS

This device contains licence-exempt transmitter (s) / receiver (s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS (s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and ompliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.

Declaration of Conformity
We (Manufacturer is responsible for this declaration) Dynanic (Shenzhen) Technology Limited
(Company name)

20th Floor, Building 4, Tianan Cloud Park, Bantian St., Longgang District Shenzhen, China 518000
(Company address)
Declare under our sole responsibility that the product Trade Mark: ULTIMEA
Product Name: Poseidon D50 5.1 Channel Virtual Surround Soundbar
Model No.: U2500
To which this declaration relates is in conformity with the essential requirement set out in the Council Directive on the Approximation of the laws of the Member States relating to RED Directive (2014/53/EU) & RoHS (2011/ 65/EU) product is responsible to affix

CE marking, the following standards were applied:

• EN 55032:2015/A11:2020
• EN 55035:2017/A11:2020
• ENIEC 61000-3-2:2021
• EN 61000-3-3:2013/A1:2021
• ETSIEN 301 489-1 V2.2.3(2019-11) ETSIEN 301 489-17 V3.2.4(2020-09)
• EN 300 328 V2.2.2(2019-07)
• EN 50663:2017
• ENIEC 62368-1:2020+A11:2020 IEC62321-3-1:2013
• IEC 62321-4:2013+A1:2017
• IEC 62321-5:2013
• IEC 62321-6:2015
• IEC 62321-7-1:2015
• IEC 62321-7-2:2017
• IEC 62321-8:2017

Full Name: Yoyo.Yu

Position: Approbation Manager

Signature:

• Place/Date: Shenzhen,China/Dec.25-2022

Trade Marks：

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Soundlab Technology Co.,Ltd. is under license. Other trademarks and trade names are those of their respective owners.

The Adopted Trademarks HDMI, HDMI High-Definition Multimedia Interface, HDMl trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other.

Poseidon D50 5.1 Channel Virtual Surround Soundbar
Model No.: U2500
EC
REP
Dynanic GmbH
Buchenring 57, 22359 Hamburg, Germany
UK
REP
UK Crossborder limited
7 Bell Yard London WC2A 2JR, UK United Kingdom
Made in China
Manufacturer: Dynanic (Shenzhen) Technology Limited
Address: 20th Floor, Building 4, Tianan Cloud Park, Bantian St.,Longgang District, Shenzhen, China 518000

If you need our support, kindly reach out to our service team. We are always glad to help.

+ 1 888-598-8875 (US)
Mon-Fri 9am-5pm (PST)
+49 89-628-25828 (EU)
Mon-Fri 9am-5pm (CET)
support@ultimea.com
support@ultimea.de
support.ultimea.com
support.ultimea.de

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>