DFI Windshield Defender Kit Instructions
- June 15, 2024
- DFI
Table of Contents
Windshield Defender™ Kit
Application Instructions
- Start by wetting the glass and using the white scrubber pad with the Restoration Powder™ to prep the glass for the Windshield Defender™ application. Make sure to remove all dirt, water spots, etc.
- Once thoroughly clean and dry, apply the Windshield Defender™ protective coating using firm circular, overlapping motions, going over the entire area at least twice.
- To test the application, spray the glass, and look for uniform water beads. For areas that are not beading up uniformly, dry the entire surface and reapply the Windshield Defender™ coating as needed.
- Finalize the application process by polishing the glass with the microfiber towel. If preferred, you may wash the windshield with soapy water.
Important:
Do not apply the Windshield Defender™ coating in direct sunlight and do not unfold the towelette immediately upon removal of the package; only unfold as needed.
©
Diamon-Fusion Interational, Inc. Al rights reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>