Wings Flobuds 100 True Wireless Earbuds User Manual

: June 15, 2024
: WINGS

Table of Contents

Wings Flobuds 100 True Wireless Earbuds User Manual
INTRODUCTION
WHAT’S IN THE BOX
PRODUCT LAYOUT
HOW TO PAIR
TOUCH CONTROLS
CALL CONTROLS
CHARGING THE EARBUDS
RESETTING THE DEVICE
TECHNICAL SPECIFICATIONS
M SAFETY AND MAINTENANCE
DOWNLOAD
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Wings Flobuds 100 True Wireless Earbuds User Manual

Wings Flobuds 100 True Wireless Earbuds

INTRODUCTION

Wings is India’s fastest growing audio, smart watches and accessories brand catering to the youth. Wings was recognized as the most Prestigious Rising Brand Of Asia 2021-2022 by BARC Asia in the gaming lifestyle accessories category.

Wings Is on a mission to create a pop culture led brand that the youth is proud to own and Nodwindi subsidiary of Namara Technologies, has a strategic investment in alignment with the long term vision.
But before you dive right in, we strongly recommend going through this user manual thoroughly as it contains Important technical Information to ensure you have a seamless audio experience with us. After you’re done with reading the manual, get ready to go to the nod level with Wingsl

WHAT’S IN THE BOX

PRODUCT LAYOUT

LAYOUT

HOW TO PAIR

Step 1: Make sure your case is charged up. Open the lid of the case and take out the earbuds.The earbuds will turn ON end automatically enter the pairing mode, and the Left earbud LED will flash quickly.

Step 2: Tap “Fiobuds 100” from the smartphone’s Bluetooth menu.There is a ring prompt after a successful connection. This indicates that the earbuds are successfully connected to your device.

Step 3: Congratulations! You are now connected and can start playing media.

Note: If you do not connect to any device within 180 seconds of entering pairing mode, then both earbuds will automatically turn OFF. Please put the earbuds back into the case and repeat the pairing process.

TOUCH CONTROLS

CALL CONTROLS

CHARGING THE EARBUDS

Note: Please only use 5V/1A adapter to charge the case as higher voltage adapter can damage the battery of the case and earbuds.

Case Low Battery: Earbuds will play a jingle, when the buds are low on power.

Earbuds Charging: When earbuds are placed Inside the charging case, the LED light on the earbuds will turn ON indicating that the earbuds are being charged.

Earbuds Completely Charged: When the earbuds are completely charged, the LED Light on the earbuds will go OFF.

RESETTING THE DEVICE

Please follow the below steps when you see two ‘Flobude 100’ in your Bluetooth device menu on your mobile, or you can hear music through only one earbud. This means the left and right earbuds have not auto-paired with each other:
Step 1: Disconnect the earbuds and remove “Fiobuds 100” from your mobile list of paired devices.

Step 2: Tap 5 times quickly to clear the pairing date on either of the earbuds.
The LED light on both earbuds will blink 3 times simultaneously to show that the process is completed.

Step 3: Put them back Into the charging case, and “Flobuds 100” is ready to use. They will automatically switch on and pair instantly as well.

TECHNICAL SPECIFICATIONS

PARAMETERS	VALUES
Bluetooth Version:	V5.3
Effective Distance:	15M
Impedance:	32 Ohm
Product Weight:	40g
Speaker Size:	13mm
Total Play Time:	Upto 50 Hours
Earbuds Play Time:	Upto 10 Hours
Talk Time:	Upto 45 Hours
Standby lime:	Upto 300 Hours
Complete Charging lime:	1.5 Hours
Earbuds Charging Time:	1 Hour Rated
Input:	5V/1A
Frequency:	2OHz-2OKHz
Water and Sweat Resistant:	IPX5
Charging Port :	Type-C

M SAFETY AND MAINTENANCE

Please read the below suggestions to help prolong the product lifespan and clearly understand the warranty clauses: • Please keep the product dry, do not put it in humid conditions to avoid a short circuit.
• Do not expose it to the peak sun or high heat for extended periods, as this will shorten the iffespan of electronic components, damage the battery and deform some plastic parts.
• Please do not put it in cold circumstances to avoid damage to the PCB board.
• Please do not attempt to dismantle the product, as it may be unsafe, especially for non-professionals.
• Do not use chemical products, detergents, or oily liquids to clean the item.
• Do not scratch the surface with sharp Items to avoid damaging the case and appearance.
• Do not charge the product for more than 5 hours to avoid loss in battery life.
• Avoid hearing music at maximum volume for long periods as this can affect your hearing and is not advisable

Note: Any damage to the product that is not a manufacturing defect will render the warranty null and void. Therefore, please take utmost care of your product.