KLIM Boombox B3 Radio CD Player User Manual
- June 15, 2024
- KLIM
Table of Contents
KLIM Boombox B3 Radio CD Player User Manual
SAFETY WARNINGS
This symbol indicates that there are important operating and maintenance instructions in the manual accompanying this device.
Do not expose this unit to rain, moisture, or humid environments, to prevent fire or shock hazards.
This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. CAUTION: to prevent electric shock, carefully insert the plug correctly into a matching socket or adapter of suitable voltage.
This product utilizes a Class 1laser to read Compact Discs. Invisible laser radiation is present when the CD player is open, and the system’s interlock has failed or has been damaged. Avoid direct exposure to the laser beam at all times.
Replace the battery only with the same or equivalent type: only use comparable rechargeable 1.2 V C-type batteries. CAUTION: Never mix batteris of different types (we recommend Ni-MH 12 V batteries). Do not use conventional 1.5 V C type batteries as they might damage the device.
There are no user-serviceable parts inside the unit: dismantling it will void your warranty. If you face any issues with the device, please contact the manufacturer directly. We are at your disposal every day and our specialists always reply within 24 hours. Remember that your KLIM Boombox is covered by a dependable 5-year warranty.
CONTROLS AND SPECIFICATIONS
LOCATION OF CONTROLS
- POWER/RGB LIGHTS
- PREV
- NEXT
- PLAY/PAUSE/P+/SCAN
- voLVoL+
- EQ/MODE
- STOP/REP/MEM
- AUX-OUT PORT
- USB PORT
- AUX-IN
SPECIFICATIONS
AC voltage: 110-240 V 50/60 Hz
Battery capacity: 10.000 mAh (2500 mAh x 4) / 4.8 V
Speaker power: 5 W x 2 (total 3W)
Speaker signal: stereo
FEATURES
| Compatible with USB drives containing MP3/WMA Tlles| | £Q intelligent
digital sound switching
---|---|---|---
| Supports CD-Audio, CD-R. CD-RW playback| | Input and output auxiliary ports
for 3.5 mm jacks
| Built-in FM radio function with adjustable frequency band| | Colorful RGB
light design around both speakers
| Compatible with Bluetooth-enabled devices (BT 4.2)| | Includes 4 NiMH
rechargeable batteries (No.2 – Type C)
| LCD display and electronic digital volume control|
| Includes battery recharge and
circuit protection
FIRST USE
POWER UP
The KLIM Boombox can be powered up via AC power or batteries.
AC POWER
Plug the AC cord into a standard AC outlet (100-240V – 50/60 Hz)
RECHARGEABLE BATTERIES
- Open the battery compartment cover.
- Take out the included batteries.
- Remove the protective film from the batteries.
- Insert the four batteries as shown above.
- Close the battery compartment cover.
Main Switch (0n/0ff):
Move the switch to the right side to put the device in standby mode. Keep the
device switched off when not in use to extend battery life.
AC power indicator: the red LED indicator lights up when the device is
connected to an AC power source.
TURN ON THE BOOMBOX
While on standby mode, press the power button once to turn on the boombox.
Tip: to turn off the lights around the speaker, press and hold the power
button for 3 seconds while the device is on.
The KLIM Boombox has a battery
recharging system that recharges the batteries when plugged in using the AC
cord. If you plan to use the Boombox mainly while connected to an AC source
for an extended period, we recommend removing the rechargeable batteries to
preserve them.
CD & BLUETOOTH MODES
USING THE CD PLAYER
Step 1: Open the CD compartment.
Step 2: Place the CD inside and close the compartment.
Step 3: Press MODE and select CD mode.
Step 4: Press PLAY/PAUSE button to play the loaded CD.
Press once to go to the previous/next track.
Press and hold to fast-forward or rewind the current track.
While playing a track, press once for single-track repeat (ONE). Press again for playlist repeat (ALL). Press again to cancel this function (OFF). Press and hold to completely stop playback.
BLUETOOTH MODE
Step 1 : Actvate Bluetooth on your pione or tablet.
Step 2: Press MODE ond select 8T mod.
Step 3: Find “KLIM Boombox B3″ in the available devices list and select
it to pair with the boombox.
Step 4: Press the PLAY/PAUSE button to play or pause the current track.
Press and hold to disconnect the pair device.
Some playback features such as
fast-forward or rewind may not function, depending on the connected device.
RADIO & AUX INPUT
USING THE RADIO
Step 1: Press the MODE button and select RAD, then extend the FM antenna
to improve rodio reception.
Step 2: Long press PREV or NEXT buttons to jump to the previous or next
available station. Short press to manually select the frequency.
SETTING RADIO STATION PRESETS (AUTOMATIC MODE)
Press and hold the PLAY/PAUSE button to auto-scan available FM frequencies. All detected frequencies will be saved to presets P01 to P20. Once the auto- scan has finished, briefly press the PLAY/PAUSE button to cycle through all saved presets.
SETTING RADIO STATION PRESETS (MANUAL MODE)
Step 1: select the desired frequency using these buttons, as explained
earlier.
Step2: briefly press the REP button to enter memory mode. When the on-screen
text flashes, wait for 2 seconds, then press the button again to save the
current frequency to @ preset (e.g. PO1to 105.3).
Note: you can press the PLAY/PAUSE button while the numbers are flashing
to select which preset you want to save the station to.
Step 3: briefly press the PLAY/PAUSE button to select a preset FM station, and repeat to move to the next station (P01 to P20).
AUXILIARY PORT (IN)
Step 1: connect a 35 mm cable (not included) to the AUX port on the KLIM
Boombox.
Step 2: Connect the other end to the output auxiliary port on your device
(such as an Mp3 player)
Step 3: Press the MODE button to select AUX mode. Audio played through
the connected device will now sound through the boombox.
HEADPHONES & USB MODES
AUXILIARY PORT (OUT)
Use this port to connect external earphones to the boombox. Simply plug in the
3.5 mm jack to the AUX port on the right and the sound will play through the
connected earphones. You may also use this auxiliary output port to connect
the boombox to other compatible devices with a 3.5 mm jack.
USB PLAYBACK
Press the EQ/MODE button to select USB mode and plug in a USB flash drive with
your music selection. The KLIM Boombox is compatible with Mp3 and WMA audio
file formats.
Press once to go to the next or previous track. Press and hold to fast-forward or rewind the current track.
While playing a track, press once for single-track repeat. Press again for playlist repeat. Press again to cancel this function. Press and hold to completely stop playback.
On any playback mode, press and hold the EQ/MODE key to change equalization settings: F LAT / CLASSICAL / JAZZ / ROCK / POP
CONTACT AND TROUBLESHOOTING
If you ever encounter any trouble with this device or any of our products, remember that we are at your disposal and ready to help you with any issue. Contact us at support@klimtechnologies.com for assistance. Our specialists always reply within 24 hours. And don’t forget that the KLIM Boombox is covered by a dependable 5-year warranty.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>