KLIM K152 Gaming Desk User Manual
- October 30, 2023
- KLIM
Table of Contents
KLIM K152 Gaming Desk User Manual
SAFETY WARNINGS
IMPORTANT SAFETY WARNINGS
Before first use, ensure that all parts are assembled properly, and all screws are firmly tightened. Check the table stability regularly and tighten any screws that may have become a bit loose after long periods of use.
Do not place excessive weight on the table, as it could become damaged or even break, causing material and/or personal injury.
Do not step on any parts of the table or lean your weight on the tabletop to avoid damage on the table or personal injury. This gaming desk is intended for indoor use only.
Avoid excessive exposure to sunlight and humid environments both during usage and storage.
CONTENTS
GAMING DESK
ACCESSORIES
SCREWS BOX & TOOLS
IMPORTANT
QR Code
Scan this QR code to watch the assembly video.
ASSEMBLY GUIDE
Insert the telescopic rods (B1 and B2) into the connecting rod (C) and fix it with 8 M6x16 mm screws (M). Pay attention when lining up the screw holes. When fixing the screws, please loosely fix all the 8 screws in the corresponding holes first, and then tighten them together at the end.
Connect the assembled frame to the T-shaped leg brackets (A1,A2) with 4 M6x16 mm screws (M), then fix the V-shaped foot bracket (A1a,A2a) to the T-shaped bracket with 4 M6x16 mm screws (M) for each bracket. Finally fix the 4 foot pad knobs (F) on the V-shaped foot on the shelf.
Use 4 M6x16 mm screws (M) to connect and fix the diagonal brace to the assembled T-shaped leg brackets (Note: Please lightly fix the 4 screws into the corresponding screw holes first, and then tighten at the same time)
Put the two tabletops on a flat surface, with the underside (the side with the holes) facing up, then insert 3 wooden dowels (H) into the holes of table top G1. Then, combine the two tabletops by aligning the holes of G2 to the dowels inserted into G1 and push them together. After the tabletop has been pushed together, use the 3 connecting brackets (E) to fix the two tabletops together using 6 M8x14 mm screws.
Place the assembled frame from step 3 onto the tabletop assembled from step 4. Align the screw holes on the frame with the holes on the underside of the tabletop, ensure that the frame is rotated so that the side with two screw holes is facing the front (curved) side of the tabletop. Use 4 M8x40 mm screws (O) to fix the corners of the frame to the tabletop, we advise you to lightly fix all the screws, starting with opposite corners first, then tighten them all together. Then use 4 M8x14 mm screws (N) to connect the centre of the frame to the tabletop.
Use 2 M6x18 mm screws (P) to fix the headphone hook and cup holder to the bottom bracket.
Place the mouse pad on the desktop, align all sides, then put the 2 wire boxes into the holes on both sides of the desktop.
English
Thank you for choosing our KLIM K152 Gaming Desk! We hope that you enjoy your
new setup for years to come. May you finish all your work in time, and win
every match you play! If you need any help during assembly or use, or if you
simply want to share your feedback, do not hesitate to reach out to us
directly at
support@klimtechnologies.com. Our
specialists will reply within 24 hours!
Need Help?support@klimtechnologies.com
Documents / Resources
| KLIM
K152 Gaming
Desk
[pdf] User Manual
K152 Gaming Desk, K152, Gaming Desk, Desk
---|---