Klim Nomad Portable CD Player Discman with Long-Lasting Battery User Manual

: June 6, 2024
: KLIM

Klim Nomad Portable CD Player Discman with Long-Lasting Battery User

Manual

IMPORTANT SAFETY INSTRUCTIONS

Please read this manual corefully before using this player and keep it for later reference.

THE CO PLAYER

If the player foils to work, please contact our customer support team on support@klimtechnologies.com, our staff will be happy to resolve your problems. Remember that the KLIM Discmon is
supported by our warranty.
The device connot be used or stored in moist environments. Keep the device owoy from any liquid, steam, etc.
Do not place any liquid or unintended objects other than CDs into the player.
Do not expose the device to sunlight over long periods of time and keep it owoy from heaters. The player is not intended to be stored or used in high temperature environments.
All professionals with extensive electronic knowledge and maintenance experience ore allowed to disassemble the player for maintenance. The replacement of spore ports must be done in strict occordonce with the parameters of the circuit design.
Do not scratch or hit the player with sharp objects.
There ore light emitting diodes in this device. Do not look directly into the lens; such exposure may co use permanent eye damage.
Children under the age of 12 should be supervised by on adult when using this device.

BATTRY

Do not disassemble the device or charge the device with power adopters that do not meet the electricol parameters of this product to ovoid permanent damage. For your safety, please handle the built-in high-copocity polymer lithium battery by following the instructions below:

Do not remove the battery pock.
Do not drop or expose the device to any physicol impoct.
Do not short circuit or pierce the battery.
Do not place the player under ambient temperatures above 131°F [55°C),
Do not put the battery in o fire,
If the battery hos been damaged, ask o professional to replace the battery with the some specificotions, or contact our customer support team,

PACKAGE CONTENTS & PRODUCT DIAGRAM

CONTACT AND TROUBLESHOOTING

Please refer to poge 7 for common issues ond solutions when operating the KLIM Nomod. In cose you require odditionol ossistonce or hove ony questions, pleose write us directly to our
emoil address ot support@klimtechnologies.com.

FIRST USE

HOW TO INSERT

Push the OPEN button on the right to open the cover. Before first use, remove the protective cordboord to reveol the lens. Insert your index finger into the center hole of the disc and toke the edge of the disc
with your thumb. Keep the labeled side upward while inserting the disc into CD player and press the disc gently to lock it in place.
Close the disc cover completely, otherwise the player will not read the disc.
To remove on inserted disc, gently pull it upwards from the side.
Note: The player is only compatible with CD, CDR, Mp3,
HOC □ formats.

USEING A TF CARD

After inserting □ TF cord into the corresponding slot, press and hold the MODE button to enter TF cord playback mode. NOTE: the TF cord
slot only supports cords up to 32GB of cop □ city.

USING ERRPHONES

Only earphones with □ 3.5 mm jock ore compatible with this device. In order to experience the best sound quality, please use the included
KLIM Fusion or similar high fidelity headphones. You may connect two headphone sets simultaneously, one in each port.

HOW TO TURN ON THE PLAYER

The power switch is locoted on the side. Slide it to the ON position to ploy normally. When the lost track in □ disc is ployed or there is no disc in the unit, the player will enter standby mode ofter 20
seconds. Press the PLAY button □ gain to restart the player.

HOW TO TURN OFF THE PLAYER

There ore two ways to turn off the player: POWER OFr-3N nm□□□1 )

Move the power switch to the OFF position if the player will not be used for on extended period of time.
The player will enter standby mode by pressing the STOP button twice in succession. On standby, the player will continue to consume some power, since it is not completely switched off.
IMPORTANT: while on standby mode, press the Ploy/Pause button to reactivate the player.

CHARGING THE PLAYER

PLAYBACK TO CONNECT BLUETOOTH DEVICES

Turn on your Bluetooth headphone/speaker and make sure that the Bluetooth function is turned on.
Turn on the KLIM Nomad player and press the Bluetooth button to activate the Bluetooth function
Select the “BT Search” option using the buttons, then press the PLAY button to start searching for ovoiloble Bluetooth devices to pair with.
Press the PLAY button to select the name of your device that needs to connect to.
Once the device is successfully po ired, press the Bluetooth button to return to the ploy interface.

SAVING TRACK PRESTS

Press STOP to stop □ II playback.
Press the PROG button to enter programming mode. The screen changes os depicted on the right.
Press to select the track you wont to save, then press PROG to save it.
Repeat step 3 until you hove assigned □ II the tracks. You con assign up to 32 tracks.
Press PLAY while in programming mode to start ploying your track selection.
To exit programming mode, press the STOP button.
NOTE: the preselection is not stored in memory. Once you leave the programming mode, you’ll need to reprogram □ II tracks □ gain.

HOW TO PLAY AND MP3 DISC

Press DIR to choose different folders if there ore multiple folders on the inserted disc.

PLAYBACK SETTINGS (REPEAT MODE)

Press the MODE button to change the playback co ► ASP01 * Cil mode: 01 00:01
Repeat once [ o 1 ).Repeat □ II [O ALLJ, random
playback [RAND), track preview [INTRO), OFF.
During track preview, the first 10 seconds of each track is ployed before moving to the next track.

FM RADIO

Connect the headphones to the AUX 2 port ( ) : they will □ ct □ s on □ ntenn □ □ nd increase the signal reception, You con □ Is □ connect □ detachable 3.5 mm □ ntenn □ [not included),
Press the FM button J to enter Rodi □ mode.
Press the PLAY button □ nd the player will start searching for stations □ nd storing them □ utom □ ticolly, Once the search hos finished, it will ploy the first station detected.
Usethe[E)Jond[(3J buttons to change stations.
Note: press the MODE button to change the frequency m □ nu □ lly, Press the FM button to exit Rodi □ mode,

CONNECTION TO OTHER SPEAKERS

Use the included 3.5 mm mole-to-mole coble to connect the CD player to other devices such □ s external speakers, amplifiers, headphones, etc. You con □ Is □ connect it to your cor’s audio
system vi □ the AUX port.
NOTE: connection vi □ USB port is not supported. Refer to your audio system’s m □ nu □ ls for further instructions. WARNING: do not manipulate the CD player while driving, Always keep your
attention on the rood!

VOLUME ADJUSTMENT

The volume controller is loc □ ted on the side of the player. Flick it to the left or right to decrease or increase the volume, Remember to
select on adequate volume level to prevent any harm, Listening to loud sounds for long periods of time may c □ use permanent hearing damage,