KLIM Technologies K800 Office Chair User Manual
- October 30, 2023
- KLIM Technologies
Table of Contents
K800 Office Chair
Product Information: KLIM K800
The KLIM K800 is a high-quality office chair designed for ultimate comfort and functionality. The chair comes with five chair legs, five casters, armrests, a center bracket, a seat, a gas piston, a backrest, and a headrest. The chair is easy to assemble and comes with an assembly guide.
Product Features
- Adjustable armrests for maximum comfort
- Five caster wheels for easy movement
- Gas piston for adjustable seat height
- Backrest and headrest for added support
Content & Diagram
- Backrest
- Headrest
- Center bracket
- Seat
- Armrests
- Mechanism
- Gas piston
- Chair leg (x5)
- Caster (x5)
- Bracket cover
- A. M6 x 14 mm Screw (x10)
- B. M6 x 25 mm Screw (x6)
- C. M8 x 20 mm Screw (x3)
- D. M6 x 20 mm Screw (x3)
- E. M6 x 20 mm Screw (x2)
- F. Allen Wrench
ASSEMBLY GUIDE
- Insert the 5 legs into the center bracket and use the 10 screws (M6 x 14 mm) to fasten them. Then, insert the bracket cover over the assembled bracket.
- Push the casters into the five-star bracket and insert the gas piston in the center of the bracket. Pay attention to the orientation of the piston.
- Fix the armrests to the bottom of the seat using the 6 screws (M6 x 25 mm).
- Align the mechanism with the screw holes at the bottom of the seat and use the 4 screws (M6 x 20 mm) to fix it in place. Make sure that the mechanism is correctly oriented to keep the lever in the good position.
- Fix the assembled backrest to the seat using the 3 screws (M8 x 20 mm).
- Align the headrest with the holes located on the upper part of the backrest then use the 2 screws (M6 x 20 mm – E) to fix it. Align the top of the gas piston with the hole of the mechanism. Place the upper part of the chair onto the piston and keep lowering it until both parts are fully connected.
USER INSTRUCTIONS
- Seat height adjustment
- 4D Armrests adjustment
- Tilt lock
- Headrest adjustment
- Tilt tension adjustment
- Ergonomic Lumbar Support System
Thank you for acquiring our KLIM K800 Office Chair! We hope that you enjoy
this chair for years to come, remember to keep a healthy posture while
sitting: your back & neck will thank you!
If you need any help during assembly or use, or if you simply want to share
your feedback, do not hesitate to reach out to us directly at
support@klimtechnologies.com. Our specialists will reply within 24 hours!
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>