POWER-LITE LED-FL240W LED Stadium Flood Light Installation Guide
- June 13, 2024
- POWER-LITE
Table of Contents
POWER-LITE LED-FL240W LED Stadium Flood Light
Warning: Pre-Installation Considerations:
- Unpack and check the product carefully.
- If there is any damage to new products, please keep the product packaging and return it to us.
- Please do not attempt to use a damaged product.
- It should be installed by a qualified electrician.
- Non-professional personnel must not disassemble or maintain the lamp, or the manufacturer has the right to refuse any warranty service.
- When in installation and use, the lamp must not face up.
Installation Dimensions (Unit: mm)
| Product Code | L1 | L2 | L3 | Ø1 | Ø2 |
|---|---|---|---|---|---|
| LED-FL240W | 132.5 | 180.0 | 227.5 | 12.5 | 12.5 |
| LED-FL360W | 180.0 | 420.0 | – | 12.5 | 12.5 |
| LED-FL480W | 180.0 | 420.0 | – | 12.5 | 12.5 |
| LED-FL720W | 180.0 | 420.0 | 660.0 | 12.5 | 12.5 |
| LED-FL960W | 180.0 | 420.0 | 660.0 | 12.5 | 12.5 |
Installation Instructions
Vertical Installation Methods:
- Punch in the wall and install the flood lights on the wall.
- With expansion screws mounted, fix LED flood lights with nut locking on the wall as shown in Figure B.
- Adjust the lamp body to the desired angle.
- Finally, connect the blue wire and brown wire to the “N” and “L” respectively, yellow-green wire to the ground wire.
- Confirm the correct connection, and switch the power on.
- Switch on the power. If the light is on, then installation ends.
Horizontal Installation Methods:
- Open two holes the same size as Figure A at the fixed location and lock the screws.
- Adjust the lamp body to the desired angle.
- Finally, connect the blue wire and brown wire to the mains “N” and “L” respectively & yellow-green wire to the ground wire.
- Confirm the correct connection and power it on.
1800 909 306
nedlandsgroup.com.au
sales@nedlandsgroup.com.au
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>