POWER LITE LED-SL35W Led Shoplighter Instruction Manual
- June 13, 2024
- POWER-LITE
Table of Contents
POWER LITE LED-SL35W Led Shoplighter
Product Information
- Product Name: LED Shoplighter
- Model: LED-SL35W
- IP Rating: IP20 (indoor use) / IP65 (outdoor use)
- Voltage: See details on package
- Wattage: See details on package
- Ambient Temperature: -20°C to +45°C (indoor use) / -20°C to +65°C (outdoor use)
- Storage Conditions: See details on package
Safety Instructions
- Please refer to the IP rating to determine whether the product can be used indoors or outdoors.
- Take note of the voltage and wattage information provided on the package.
- Ensure that the ambient temperature falls within the specified range for safe operation.
- Follow the recommended storage conditions mentioned on the package.
Product Usage Instructions
How to Install:
-
Make sure to maintain the required clearance from structural members and building elements to prevent the risk of fire.
SCB (Side Clearance Below): Maintain a 25mm gap above the top of the fitting.
HCB (Horizontal Clearance Below): Maintain a 25mm gap on the side to the structural membrane.
C-gap (Clearance to Thermal Insulation): Maintain a 25mm gap to thermal insulation. (Refer to Fig.1) -
Proceed with the installation as shown in Fig.2.
-
Connect the LED driver(s) according to the provided instructions.
-
Ensure that all connections are secure and properly insulated.
-
Test the functionality of the LED Shoplighter before finalizing the installation.
Warning:
- Take necessary precautions when handling the LED driver.
- Follow the instructions provided with the LED driver for safe installation and usage.
Safety Instructions
- Switch off before installation.
- Licensed electrician for installation only.
- Non-dimmable version, not for use with light dimmers.
- Dimmable Version, if it is triac dim, for use with triac dimmer.
- Product modification is not valid for warranty.
Production Specification
- IP Rating: IP20 / IP65
- Voltage: See details on package
- Wattage: See details on package
- Ambient Temperature: -20℃~+45℃
- Storage Conditions: -20℃~+65℃
How to Install
- Subject to Figure 1 & Table 1 for installation place and conditions
- Follow Figure 2 install steps to finish installation
RISK OF FIRE – Required clearance from structural members and building
elements
SCB=25mm HCB=25mm
Warning:
Input wire diameter ≥0.75mm²；
Product modification and improper installation are not valid for warranty!
POWER-LITE
1800 909 306
nedlandsgroup.com.au
sales@nedlandsgroup.com.au
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>