Ubiquiti UVC-AI Pro 8MP IP Camera Installation Guide
- June 13, 2024
- UBIQUITI
Table of Contents
Ubiquiti UVC-AI Pro 8MP IP Camera
Product Information
The UVC-AI-Pro-White is a device manufactured by UBIQUITI International
Holding B.V. It is designed to comply with the essential requirements and
relevant provisions of Directives 2014/30/EU and 2014/35/EU. For detailed
compliance information and the full text of the EU declaration of conformity,
please visit the following internet address:
ui.com/compliance
The device is manufactured in Son, Netherlands.
Product Usage Instructions
- Installation Guide:
- Ensure that all the necessary components are included in the package.
- Follow the installation steps provided in the guide.
- Connect the device to the power source using the provided AC adapter.
- Adjust the position of the device as needed for optimal performance.
- Refer to the guide for further instructions on configuring and using the device.
Safety Notices
(if applicable)
- Read, follow, and keep these instructions.
- Heed all warnings.
- Only use attachments/accessories specified by the manufacturer.
WARNING : Failure to provide proper ventilation may cause fire hazard. Keep at least 20 mm of clearance next to the ventilation holes for adequate airflow.
WARNING : To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.
WARNING : Do not use this product in location that can be submerged by water.
WARNING : Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning.
Electrical Safety Information
(if applicable)
- Compliance is required with respect to voltage, frequency, and current requirements indicated on the manufacturer’s label. Connection to adifferent power source than those specified may result in improper operation, damage to the equipment, or pose a fire hazard if the limitations are not followed.
- There are no operator serviceable parts inside this equipment. Service should be provided only by a qualified service technician.
- This equipment is provided with a detachable power cord which has an integral safety ground wire intended for connection to a grounded safety outlet.
- a. Do not substitute the power cord with one that is not the provided approved type. Never use an adapter plug to connect to a 2-wire outlet as this will defeat the continuity of the grounding wire.
- b. The equipment requires the use of the ground wire as a part of the safety certification, modification or misuse can provide a shock hazard that can result in serious injury or death.
- c. Contact a qualified electrician or the manufacturer if there are questions about the installation prior to connecting the equipment.
- d. Protective earthing is provided by Listed AC adapter. Building installation shall provide appropriate short-circuit backup protection.
- e. Protective bonding must be installed in accordance with local national wiring rules and regulations.
Declaration of Conformity
Hereby, UBIQUITI, declares that this device, UVC-AI-Pro-White, is in compliance with the essential requirements and other relevant provisions of UK Regulations, Electromagnetic Compatibility Regulations 2016 and Electrical Equipment (Safety) Regulations 2016. The full text of the UK Declaration of Conformity and detailed compliance information is available at the following internet address: ui.com/compliance
Installation Guide Ubiquiti Distribution UK Limited
2 New Street Square, London, United Kingdom