EPIC OFFICE Boost Static Single Sided Fixed Height Workstation Instruction Manual
- June 12, 2024
- EPIC OFFICE
Table of Contents
Boost Static Single Sided Fixed Height Workstation
Frame Instruction Manual
Component parts
| NO | Component Name | PCS |
|---|---|---|
| 1 | Leveling pads | 4 |
| 2 | Table feet | 2 |
| 3 | Column( right) | 1 |
| 4 | Bolt: M6x12 | 9 |
| 5 | Screw:ST4x20 | 22 |
| 6 | Side brackets | 2 |
| 7 | Rubber pad | 14 |
| 8 | Top frame-1 | 1 |
| 9 | Bolt: M6x10 | 3 |
| 10 | Centre bracket | 1 |
| 11 | Center rails | 2 |
| 12 | Top frame-2 | 1 |
| 13 | Column(left) | 1 |
| 14 | Bolt: M6x16 | 9 |
| 15 | Allen Wrench(4mm) | 1 |
| 16 | Cable Tie | 5 |
Assembly Instructions
Step 1
Loosen the pre-installed bolts and Adjust the length of the top frame to match
the size of the table top. 
Step 2
Inset the column to the top frame.
– First fix lifting column with 4pcs screws M6x12 like B displayed
– And then tighten the pre-installed bolts like C displayed 
Step 3
Install the two table feet with Screws 8 pcs M6x16, Install the 4 pcs leveling
pads 
Step 4
Install the two side brackets with Screws 4 pcs M6x12, 
Step 5
Mount the tabletop and fix it with 14 pcs screws ST4x20; Tighten the screws
like D display to fix the top frame.Fix the centre bracket with 2 pcs screws
M6x10 
Cable tray installation
Step 1
– Fix the cable tray to the cable tray arms with 8 pcs M6x10 screws. 
Step 1
– Install the U brackets to the desk frame with 4 pcs M8x10 screws.
– Mount the cable tray to the desk frame and fix it with 6 pcs M6x10 screws
Screen panel installation
Step 1
– Insert the tapped plates to the screen panel
Step 2
– Install the brackets to the panel with 8 pcs M5x6 screws. 
Step 3
– Fix the panel to the desk frame with 10 pcs M6x10 screws. 
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>