EPIC OFFICE Boost Static Return Fixed Height Workstation Frame Instruction Manual
- June 12, 2024
- EPIC OFFICE
Table of Contents
EPIC OFFICE Boost Static Return Fixed Height Workstation Frame
OVERVIEW
Component parts
| NO. | Component Name | PCS |
|---|---|---|
| 1 | Bolt: M6x16 | 5 |
| 2 | Leveling pads | 2 |
| 3 | Table feet | 1 |
| 4 | Column | 1 |
| 5 | Bolt: M6x12 | 4 |
| 6 | Screw: ST4x20 | 13 |
| 7 | Side brackets | 1 |
| 8 | Rubber pad | 10 |
| 9 | Top frame-1 | 1 |
| 10 | Bolt: M6x10 | 3 |
| 11 | Centre bracket | 1 |
| 12 | Center rails | 2 |
| 13 | Top frame-2 | 1 |
| 14 | Hand bolts M6x10 | 2 |
| 15 | Allen Wrench(4mm) | 1 |
| 16 | Cable tie | 2 |
Assembly Instructions
Step 1
Loosen the pre-installed bolts and Adjust the length of the top frame to match
the size of the tabletop.
Step 2
Inset the column to the top frame.
- First fix 2pcs screws M6x12 like C displayed
- And then tighten the pre-installed bolts like B displayed
Step 3
Install the table feet Screws 4 pcs M6x16,install the 4 leveling pads.
Step 4
Install the side bracket with Screws 2 pcs M6x12,
Step 5
Connect the return frame to the single workstation and fixed with 2 hand
bolts. Fix the centre brackets with 2pcs screws M6x10.
Step 6
Mount the tabletop and fix it with 24 pcs screws ST4x20 Tighten the bolts on
top frame to fix it.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>