Interra UG Coolon LED Lighting User Guide

June 13, 2024
COOLON

Interra UG Coolon LED Lighting

Interra UG Coolon LED Lighting -

Interra UG Coolon LED Lighting - fig1

Interra UG is an IP67 in-ground luminaire available in various lengths and colour temperatures. Interra UG is designed to allow multiple units to be placed end-to-end and produce continuous illumination void of obvious breaks.
Made from marine-grade stainless-steel base and an interlocking seamless, diffused acrylic luminaire, Interra UG provides a uniform illuminated surface.

POWER LUMINOUS FLUX

16W
16W / metre|

COLOUR TEMPERATURE

Interra UG Coolon LED Lighting - fig3

MULTIPLE CONFIGURATIONS

Interra UG is offered in three different lengths and various CCTs, providing a highly configurable, cutting edge linear in-ground fitting.

ENGINEERED TO LAST

Interra UG has been engineered for harsh trafficable environments, out of the highest quality materials.
Featuring solid acrylic and a stainless-steel base, Interra is designed to meet local and overseas standards.

Interra UG Coolon LED Lighting - fig5

LONG OPERATING LIFE

Coolon products use the world’s most reputable LED manufacturers and the latest available standards to adequately report lumen maintenance. We strive to drive LEDs under their nominal current and use state-ofthe-art heat dissipation methods, leading to durable electronics
VARIOUS CCT & COLOUR BINNING CONSISTENCY

All products are offered in various colour temperatures, and manufactured using tighter bins, ensuring excellent consistency and uniformity.
5 YEARS WARRANTY
Coolon luminaires are covered by a solid comprehensive manufacturer’s warranty thatcovers a range of possible defects and performance parameters throughout the duration of the warranty period.
PROUDLY MADE IN AUSTRALIA

Our products are designed and manufactured in Australia. Engineered to perfection, using only the highest quality components and highly skilled labour, each luminaire is assembled and thoroughly tested to ensure that it exceeds the highest standards.

TECHNICAL SPECIFICATIONS

| INTERRA-UG-S1| INTERRA-UG-S2| INTERRA-UG-S3
---|---|---|---
Product Code| LNR-INTERRA-UG-S1| LNR-INTERRA-UG-S2| LNR-INTERRA-UG-S3
Length| 311mm| 611mm| 911mm
Operating Voltage| 42VDC| |
Colour Temperature| 2700K,   3000K,   4000K,   5000K|
Typical Power Consumption| 5W| 10W| 15W
Typical Current| 120mA| 240mA| 360mA
Dimmable| Through DRV-DALIPOINT CV NEO, DRV-DIMMERPOINT-1X10A (indoor)
Ambient Operating Temperature| Ta -10°C to +40°C| |
Reported Lumen Maintenance TM21-11 (@ Ts = 55°C, lf = 65mA)| L70 (12K) > 72,000 hours L90 (12K) = 59,000 hours

Interra max. operating values (@ Ts = 40°C, If = 15mA)

IP Rating| IP67| |
IK Rating| IK10 (Luminaire must be installed according to instructions in order to guarantee rating)
Material Composition (Body)| Stainless Steel 316| |
Material Composition (LED Luminaire)| PMMA| |
Material Composition (End Block)| Stainless Steel 316| |

CARE INSTRUCTIONS

ONLY USE the following cleaning agents to wash the face of the Interra luminaire:

  • Alcohol (under 30%)
  • Soap solution
  • Soda solution
  • Ammonia, aqueous solution
  •  Hydrogen peroxide (under 20%)

DO NOT use any of the following cleaning agents on the Interra Luminaire:

  •  Alcohol (absolute)
  • Carbon tetrachloride
  • Methylated spirits
  •  Paraffin
  • Perchloroethylene
  • Petrol mixture (containing benzine)
  • Solvent stain removers
  • Trichloroethylene
  • Turpentine
  • Turpentine substitute

DO NOT use the following chemicals near the Interra Luminaire:

  • Carbon acid (disinfectant)
  • Hydrogen peroxide (over 20% – disinfectant)
  • Surgical spirit (disinfectant)
  • Tincture of iodine (5% – disinfectant)
  • Nitrocellulose (paint)
  •  Thinners, (general – paint)
  • Bituminous emulsion (building materials and protective agents for buildings)
  • Hot bitumen (building materials and protective agents for buildings)
  • Aqueous solutions of pesticides
  • Nail polish
  • Nail polish remover
  • Calcium chloride cleaning agents
  • Sodium hypochlorite

APPLICATIONS

Interrra luminaire is suitable for use in applications that include:

  •  Prolonged exposure to sea water

DO NOT use Interra luminaire in applications that include

  • Any exposure to chlorine liquid
  • Prolonged exposure to chlorine water

DIMENSIONS

Interra UG Coolon LED Lighting - fig6

Interra UG Coolon LED Lighting - fig7

Interra UG Coolon LED Lighting - fig8

Interra UG Coolon LED Lighting - fig9

WIRING CONFIGURATION

Interra UG Coolon LED Lighting - fig10

  • Typical Loom Length 150mm.

  • Standard leader supplied for each run length is 1,000mm (CBL-STR/LNR-FC4FO-DC-L-IP65-1M).
    For longer extensions of the leader, please refer to Accessories (page 7).

  •  Extension cables between LED fittings and driver or PSU is achievable depending on LED load, outdoor or indoor applications.
    Please consult Coolon for details.

WIRING COLOUR CODE

Brown| Positive / +24VDC
Red| Positive / +24VDC
Orange| Negative / Ground
Yellow| Negative / Ground

INSTALLATION LIMITS

SCENARIO 1

Interra UG Coolon LED Lighting - fig11

SCENARIO 2
*Junction Box by others

Interra UG Coolon LED Lighting - fig12

SCENARIO 3
*Junction Box by others

MAX. CONTINUOUS
CONNECTION LENGTH (X)| CONNECTOR TYPE
---|---
10,000 mm| With standard outdoor 4 pin connectors

WARNING
Avoid connecting multiple power supplies into a single circuit, unless they are specifically designed to do so.

Interra UG Coolon LED Lighting - fig14

ORDERING EXAMPLE

Interra UG Coolon LED Lighting - fig15

WATTAGE PRODUCT LENGTH PAGE 05
16W 16.8W per metre
S2
COLOUR TEMPERATURE PAGE 04 S3
2.7KCRI 2700K CRI90+
3.0KCRI 3000K CRI90+
4.0KCRI 4000K CRI90+
IP RATING
IP67

ACCESSORIES

| PRODUCT CODE| DESCRIPTION
---|---|---
POWER SUPPLY| |
| PWR-HLG-60H-42AU| Mean Well Power Supply HLG 60W 42V IP67
PWR-HLG-150-42AU| Mean Well Power Supply HLG 150W 42V IP67
PWR-HLG-240-42AU| Mean Well Power Supply HLG 240W 42V IP67
DRIVER| |
| DRV-DALIPOINT-1X5A| DALI 5 Amps 1 Channel LED Driver
DRV-DALIPOINT CV NEO| DALI 10 Amps 1 Channel Outdoor LED Driver
DRV-DIMMERPOINT-1X10A| Rotary Wall-Mount LED Driver
DRV-RDM-P4| DMX/RDM 4 Channel LED Driver
DRV-RDM CV NEO| Outdoor DMX/RDM 4 Channel LED Driver
CABLE EXTENSIONS| |
| CBL-STR/LNR-FC4FODC-L-IP65-1M| 1m Length, 4 Core 4x 16AWG Leader Flat Cable with
Loose Wires and Female Receptacle Outdoor Connector
CBLEXT-PRJ-WR2.1-IP65-3M| 3m Length, 3 Core 2x 14AWG + 1x 18AWG
Cable Extension with Outdoor Joiner
CBLEXT-PRJ-WR2.1-IP65-5M| 5m Length, 3 Core 2x 14AWG + 1x 18AWG
Extension with Outdoor Joiner
CBLEXT-PRJ-WR2.1-IP65-10M| 10m Length, 3 Core 2x 14AWG + 1x 18AWG
Extension with Outdoor Joiner
600012700| Flat Cable reducer Grommet 11×5.5mm
CBL-GEN-OC3-DC-J-IP68| 3 Pin Outdoor Cable In-line Joiner Connector

archsales@coolon.com.au
aus. 1300 287 533
intl. +613 8681 3633
www.coolon.com.au
All documentation is subject to change without notice. Refer to our website for the latest information.
Version 1.1

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals