fullwat LENNY-PAN-K1 Rotating Switch Remote Panel Owner’s Manual
- June 13, 2024
- FULLWAT
Table of Contents
- fullwat LENNY-PAN-K1 Rotating Switch Remote Panel
- Product Information
- Product Usage Instructions
- Technical specifications
- DIRECT CURRENT DRIVERS
- SINGLE COLOR
- TUNABLE WHITE
- Led Strip-controller connection
- System linking and unlinking
- Device auto-sync
- Installation diagram
- Mobile phone pairing
- ALEXA linking
- GOOGLE HOME linking
- Compatibility table
- Documents / Resources
fullwat LENNY-PAN-K1 Rotating Switch Remote Panel
Product Information
The Lenny-Pan-K1 is a smart LED control system with a rotating switch remote panel. It is designed to provide easy control over LED lights in both domestic and professional environments. The system features auto synchronization and transmission functions, allowing for seamless and convenient operation. With its low power consumption technologies, the device ensures efficient energy usage. Additionally, one controller can manage multiple receivers simultaneously. The system operates on a very low-level transmission signal, minimizing interference.
Technical Specifications
- Model: Lenny-Pan-K1
- Voltage: 3V (battery CR2032)*
- Emitting Power: 6dBm
- Standby Current: [information missing]
Compatibility
The Lenny-Pan-K1 control system is suitable for simple installations and can be used with single-color LED lights.
Product Usage Instructions
- Insert a CR2032 battery into the rotating switch remote panel.
- Ensure that the LED lights are properly connected to the receivers.
- Turn on the power supply for the LED lights.
- To control the LED lights, use the rotating switch on the remote panel.
- Rotate the switch clockwise to increase the brightness of the LED lights.
- Rotate the switch counterclockwise to decrease the brightness of the LED lights.
- To turn off the LED lights, rotate the switch to the “OFF” position.
- The Lenny-Pan-K1 control system supports auto synchronization and auto transmission. Therefore, there is no need to pair the remote panel with the receivers manually.
- Enjoy the convenience and flexibility of the Lenny-Pan-K1 smart LED control system!
Smart LED control system
- New smart LED color control system with 2.4GHz remote control.
- Auto synchronization and auto transmission functions.
- The device adopts low power consumption technologies and one controller can manage several receivers at the same time.
- The system does not produce interference as it uses a very low-level transmission signal.
- Suitable for simple installations in both domestic and professional environments
Technical specifications
Rotating switch remote panel
Model| LENNY-PAN-K1
Voltage| 3V (battery CR2032)*
Emitting power| 6dBm
Standby current| <6uA
Working temperature| -10~40°C
Working frequency| 2.4GHz
Aprox. operational distance| 30m
Not included
DIRECT CURRENT DRIVERS
DIRECT CURRENT DRIVERS
| LENNY-DRV-LS2| LENNY-DRV-WL5| LENNY-DRV-WL2P
Description| 5 in 1 receiver| WiFi 5 in 1 receiver| WiFi 2 in 1 receiver
Voltage| DC12V~24V (terminal block & jack plug inputs)
Output max. current| 6A per channel| 12A per channel
Total current| 15A| 12A
Working temperatue| -20~60°C| -10~40°C
Working frequency| 2.4GHz
Aprox. operational distance| 30m
Connection mode| Common anode
WIFI| Requires gateway LENNY-WIFOX1| Included
ALTERNATE CURRENT DRIVER
WIFI GATEWAY
Model| LENNY-WIFOX1
Working voltage| DC5V/500mA (Micro USB)
Working temperature| -20~60°C
Communication| WiFi-IEEE 802.11b/g/n 2.4GHz
Working frequency| 2.4GHz
Transmission power| 6dBm
WIFI GATEWAY
WIFI GATEWAY
Model| LENNY-WIFOX1
Working voltage| DC5V/500mA (Micro USB)
Working temperature| -20~60°C
Communication| WiFi-IEEE 802.11b/g/n 2.4GHz
Working frequency| 2.4GHz
Transmission power| 6dBm
Suggested AC/DC adaptors (not included): MWMU10GS FU-ADPY10-5-USB
SINGLE COLOR
Rotating switch remote panel functions: LENNY-PAN-K1
- Short press: Light on/off switching.
- Rotary: Brightness regulation.
- Long press with light off Night mode activation
Mobile control
For control via mobile phone, Alexa, Google Home, or Google Assistant, a WIFI
gateway is required, either built into the receiver or using the LENNY-WIFOX1
gateway.
TUNABLE WHITE
Rotating switch remote panel functions: LENNY-PAN-K1
- Short press: Light on/off switching.
- Rotary: Brightness regulation.
- Long press with light off Night mode activation.
- Long press with the light on: Use the wheel to select a white shade level.
- Caution: The device will exit CCT mode if the owner does not use it within 3 sec.
Mobile control
For control via mobile phone, Alexa, Google Home, or Google Assistant, a WIFI
gateway is required, either built into the receiver or using the LENNY-WIFOX1
gateway.
Led Strip-controller connection
Connection drawing
5 in-1 driver LENNY-DRV-LS2 / LENNY-DRV-WL5
The “Switch” button can be used to indicate which type of product is being
managed. To do so, press the “Switch” or “SET” button with a short touch until
the color from the “indicator light” is required.
2 in-1 driver LENNY-DRV-WL2P
Press “SET” continuously to switch between single color and tunable white mode.
LENNY-TRIAC1 Push button control
- Functioning
- Short press: Switches the connected device ON/OFF.
- Long press (press and hold): increases or decreases the intensity of the light.
- Connection
- The maximum number of TRIACs is 25 pieces and the maximum wiring distance from the push button is 20m.
- To control everything with a single push button, LENNY-TRIACs must be connected in cascade according to the connection diagram
System linking and unlinking
Note : The light only works after the controller is paired with one or more receivers.
Linking.
Place the Remote controller close to the desired driver to be paired.
Before starting the linking process, configure the receiver according to the
type of LED strip. Refer to the “wiring diagram” section (previous point) from
the manual.
If the light does not flash slowly, the bonding is not done. Repeat the process until this occurs
Unlinking
If the light does not flash quickly, the bonding is not done. Repeat the process until this occurs.
WARNING: If the light does not flash quickly, the bonding is not done. Repeat the process until this occurs.
Attention
- Please check if the input voltage is compatible with the voltage supported by the driver. Pay special attention not to cross positive and negative poles. The reversed connection will damage the controller.
- Do not connect the cables while the power supply is on. Turn it on when you are sure of connections are correct and there is no short circuit is possible.
- Avoid placing driver controllers in areas influenced by electromagnetic fields or close to devices that produce electromagnetic fields. Also, do not place the driver controller in areas shielded by metal surfaces or where metal surfaces come between the control and the controller. This would affect operating distance effectiveness.
Device auto-sync
Different receiver drivers can be connected to operate with the same remote
controller and operate in the same modes.
Notes:
- Self-emitting indication.
- Remote driver controllers can be paired with the same remote controller within a maximum range of 30 meters. (possible in free or semi-free spaces and without too many obstacles or walls).
Auto-transmitting function
A single remote controller may transmit control signals in succession to other
driver controllers provided if maximum coverage distance of 30m is respected
between them.
Installation diagram
Mobile phone pairing
Download and install the application on your mobile phone:
- Via QR code
- Searching the Play Store for “MiBoxer
Note:
Also compatible with the application: SMART LIFE
To link our installation with our mobile phone, we will need one of these drivers:
- LENNY-DRV-WL5
- LENNY-DRV-WL2P
- LENNY-DRV-LS2 + LENNY-WIFOX1
- LENNY-TRIAC1 + LENNY-WIFOX1
Register in MiBoxer
- We will receive an e-mail with a registration verification code, which we will have to enter in the application to finish registering account.
- In order to use the application, we must activate GPS on our mobile phone (either Android or Apple).
- Once on the main screen and our session starts, we must add the device. To do this:
Select device model
-
For model LENNY-DRV-WL5:
Click on “Smart Strip Controller (WL5)”. -
For model LENNY-DRV-WL2P:
Click on “LED controller (FUT035W-FUT039W)”. -
For model LENNY-DRV-LS2 or model LENNY-TRIAC1:
Click on “2.4GHz Gateway (WL-Box1)”. -
For model LENNY-DRV-WL5:
Disconnect the power supply from LENNY-DRV-WL5 for 10 sec.
After 10 seconds, power the controller, and within the first three seconds, press and hold the “SET” button on the receiver until the LED on the receiver flashes. -
For models LENNY-DRV-WL2P / LENNY-DRV-LS2 / LENNY-TRIAC1:
Press the SET button on the device or on the WIFI gateway for 3 seconds to activate the WIFI signal
In both cases, on the phone screen, click on “Ensure pilot lamp blinking”.
Enter the network name and password.
Attention : only a 2.4GHz network is supported (no 5G) and click on
“Start configuration”.
A countdown will appear and once paired, it will indicate that the pairing has
been successful.
Our device will appear in the list of paired devices.
Whether we have to use the WIFI gateway (LENNY-WIFOX1):
- We must link the driver to be controlled via the APP.
- To do this, click on the 2.4GHz gateway.
- First, we must choose whether we are going to configure one or more zones. In this case, as it is a zone, we enter the “change” section and select FUT088/B0.
On the screen of our mobile phone, we will see images as follows
- Click on “Link/Unlink”.
- Click on “link” to link and on “unlink” to unlink.
- Remove the power supply to the controller for 10 seconds.
- After 10 seconds, power the controller, and in the first 3 seconds, click on the mobile screen on “link” or “unlink”.
- The light will flash three times and confirm the correct linking.
- In the case of unlinking, the light will flash 10 times for confirmation
The application allows us to create groups with different receivers. This will
allow us to control several receivers at the same time: turn ON / OFF / change
the color, etc.
Once we have linked our receiver we can change our device name. This is
interesting if we are going to control it with Alexa, Google Assistant, or
Google Home.
To do so, we press and hold the name of the device on the screen and move it
to the left. We will see an “edit” and a “delete”. Click on “Edit”, change the
name, and “OK”.
ALEXA linking
To control the system with Alexa, a Wi-Fi gateway is required, either built into the receiver or using the LENNY-WIFOX1 gateway. Install the Alexa app and log in using your account.
We need to install the Mi-Light Smart skill. To do so
- Once reach the step above, Alexa will detect our receiver automatically and we will be able to change its name, include it in a group, or control it by voice.
- If the receiver is not detected automatically, we can push “detect devices” via the Alexa app function.
- Now you can work with standard ALEXA managing.
GOOGLE HOME linking
To control the system with Google Home, a Wi-Fi gateway is required, either
built into the receiver or using the LENNY-WIFOX1 gateway.
Install the Google Home app and log in with your Google account. If you have
not yet configured your home, you can do this now or later.
We need to install the Mi-Light Smart skill. To do this:
Once we have reached this point, the linking is done
To control the system with Google Assistant, a Wi-Fi gateway is required, either built into the receiver or using the LENNY-WIFOX1 gateway.
Install the Google Assistant application via PlayStore on your phone:
- We must configure it to recognize your voice. Then enter “settings” in the application and click on “Voice Match”.
- The application will ask you to repeat two phrases several times.
- Once this is done, we will be able to “call” our device using “OK Google”. For example, “OK Google turn on Fullwat” and LED strips connected to the Fullwat receiver will light up properly.
Compatibility table
| ****
Single color
| ****
CCT
| ****
RGB
| ****
RGBW
| ****
RGBWW
| “Mobile app Alexa
Google Home”
| ****
Zones
---|---|---|---|---|---|---|---
LENNY-DRV-LS2 LENNY-DRV-LS2S
5-in-1 standard receiver
| LENNY-MD-085| LENNY-MD-085| | | | LENNY-WIFOX1
gateway is required
| 1
LENNY-MD-086| LENNY-MD-086| LENNY-MD-086| LENNY-MD-086| LENNY-MD-086| 1
LENNY-MD-087| | | | | 1
LENNY-MD-088| LENNY-MD-088| LENNY-MD-088| LENNY-MD-088| LENNY-MD-088| 1
LENNY-PAN-B0| LENNY-PAN-B0| LENNY-PAN-B0| LENNY-PAN-B0| LENNY-PAN-B0| 1
LENNY-PAN-K1| LENNY-PAN-K1| | | | 1
LENNY-MD-007| LENNY-MD-007| | | | 4
LENNY-MD-092| LENNY-MD-092| LENNY-MD-092| LENNY-MD-092| LENNY-MD-092| 4
LENNY-PAN-B4| LENNY-PAN-B4| LENNY-PAN-B4| LENNY-PAN-B4| LENNY-PAN-B4| 4
LENNY-MD-089| LENNY-MD-089| LENNY-MD-089| LENNY-MD-089| LENNY-MD-089| 8
LENNY-PAN-B8| LENNY-PAN-B8| LENNY-PAN-B8| LENNY-PAN-B8| LENNY-PAN-B8| 8
LENNY-DRV- WL5
5 in 1 wifi receiver
| LENNY-MD-085| LENNY-MD-085| | | | included| 1
LENNY-MD-086| LENNY-MD-086| LENNY-MD-086| LENNY-MD-086| LENNY-MD-086| 1
LENNY-MD-087| | | | | 1
LENNY-MD-088| LENNY-MD-088| LENNY-MD-088| LENNY-MD-088| LENNY-MD-088| 1
LENNY-PAN-B0| LENNY-PAN-B0| LENNY-PAN-B0| LENNY-PAN-B0| LENNY-PAN-B0| 1
LENNY-PAN-K1| LENNY-PAN-K1| | | | 1
LENNY-MD-007| LENNY-MD-007| | | | 4
LENNY-MD-092| LENNY-MD-092| LENNY-MD-092| LENNY-MD-092| LENNY-MD-092| 4
LENNY-PAN-B4| LENNY-PAN-B4| LENNY-PAN-B4| LENNY-PAN-B4| LENNY-PAN-B4| 4
LENNY-MD-089| LENNY-MD-089| LENNY-MD-089| LENNY-MD-089| LENNY-MD-089| 8
LENNY-PAN-B8| LENNY-PAN-B8| LENNY-PAN-B8| LENNY-PAN-B8| LENNY-PAN-B8| 8
LENNY-DRV- WL2P
2 in 1 receiver with wifi and push button
| LENNY-MD-085| LENNY-MD-085| | | | included| 1
LENNY-MD-086| LENNY-MD-086| | | | 1
LENNY-MD-087| | | | | 1
LENNY-MD-088| LENNY-MD-088| | | | 1
LENNY-PAN-B0| LENNY-PAN-B0| | | | 1
LENNY-PAN-K1| LENNY-PAN-K1| | | | 1
LENNY-MD-007| LENNY-MD-007| | | | 4
LENNY-MD-092| LENNY-MD-092| | | | 4
LENNY-PAN-B4| LENNY-PAN-B4| | | | 4
LENNY-MD-089| LENNY-MD-089| | | | 8
LENNY-PAN-B8| LENNY-PAN-B8| | | | 8
LENNY- TRIAC1
Driver TRIAC
| LENNY-MD-085| | | | | LENNY-WIFOX1
gateway is required
| 1
LENNY-MD-086| | | | | 1
LENNY-MD-087| | | | | 1
LENNY-MD-088| | | | | 1
LENNY-PAN-B0| | | | | 1
LENNY-PAN-K1| | | | | 1
LENNY-MD-007| | | | | 4
LENNY-MD-092| | | | | 4
LENNY-PAN-B4| | | | | 4
LENNY-MD-089| | | | | 8
LENNY-PAN-B8| | | | | 8
Table of controls by zones
Documents / Resources
|
fullwat LENNY-PAN-K1 Rotating Switch Remote
Panel
[pdf] Owner's Manual
LENNY-PAN-K1, LENNY-PAN-K1 Rotating Switch Remote Panel, Rotating Switch
Remote Panel, Switch Remote Panel, Remote Panel, Panel
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>