TESSAN ES9939U Wireless Remote Control Plug Switch Installation Instruction
- June 14, 2024
- TESSAN
Table of Contents
TESSAN ES9939U Wireless Remote Control Plug Switch
Introduction
The TESSAN ES9939U Wireless Remote Control Plug Switch is designed to add convenience and control to your home’s electrical devices. By converting traditional outlets into smart outlets, this plug allows you to switch on and off connected devices wirelessly.
Specifications
- Model: ES9939U
- Wireless Range: Up to 100 feet (30 meters) with clear line of sight
- Compatibility: Compatible with a wide range of electrical devices
- Input/Output Voltage: 120V AC, 60Hz
- Max Load: 10A or specified maximum load
- Remote Battery: 12V 23A (may vary)
- Plug Type: Standard US plug
- Remote Frequency: Typically 433.92 MHz
What’s in the Box
- TESSAN ES9939U Wireless Remote Control Outlet
- Remote Control Transmitter
- Battery for Remote Control
- User Manual
Key Features
- Remote On/Off control for devices plugged into the outlet.
- Long-range wireless control for convenience.
- Easy to set up with plug-and-play installation.
- LED indicator for status acknowledgment.
- Compatible with lamps, fans, and other small appliances.
How to Use
- Plug the TESSAN ES9939U into your desired wall outlet.
- Connect the device you want to control into the ES9939U plug.
- Insert the battery into the remote control.
- Use the remote control to switch the connected device on or off.
Simply Plug In And Use
Safety Precautions
- Built-in Safety Mechanisms: Most remote control plugs have features like overheat protection, which automatically shuts off the power if the plug overheats.
- Quality Certifications: Reputable manufacturers will have their products tested for safety and may include certifications such as UL, CE, RoHS, etc.
- Secure Enclosure: The plug should be enclosed in a durable, fire-resistant casing to prevent electrical shorts and reduce fire risk.
- Remote Frequency Security: The wireless communication should be secure to prevent unauthorized access or interference with other devices.
- Rated Load: Do not exceed the maximum rated load specified by the manufacturer. Overloading the plug can cause overheating and potentially start a fire.
- Indoor Use: If it’s designed for indoor use, don’t use it outdoors. Outdoor conditions like moisture can damage the unit.
- Moisture and Liquid Exposure: Keep the plug away from water and other liquids to prevent electric shock and short circuits.
- Ventilation: Ensure the plug has proper ventilation and is not covered by furniture, curtains, or other items that can cause heat to build up.
- Check Regularly: Look for any signs of damage, such as melting, scorch marks, or exposed wiring. If you find any damage, stop using the device immediately.
- Unplug When Not in Use: When not in regular use, or when away from home for an extended period, unplug the device to ensure safety.
- Installation: No special installation should be needed. However, it should be plugged directly into a properly grounded electrical outlet.
- Repairs: Do not attempt to repair the plug yourself. If it is not working as it should, consult the manufacturer or a professional.
- Handling: When plugging in or removing the plug, always grip it by the plug body and not the cord to prevent damage.
- Children and Pets: Keep the device out of reach of children and pets to prevent accidental ingestion, electric shock, or damage to the device.
Maintenance
- Visual Inspection: Periodically check the plug switch for any signs of damage, such as cracks, burn marks, or melting. If any such signs are visible, stop using the device immediately.
- Clean the Device: Ensure the plug switch is free from dust and debris, which could potentially affect its performance. Use a dry cloth to gently wipe the surface of the switch. Do not use water, cleaners, or solvents, which could damage the internal electronics.
- Check the Plug Fit: Ensure that the plug switch fits securely in the outlet and is not loose, as a loose fit can lead to arcing and overheating.
- Test Functionality: Regularly check the remote control function to ensure it is operating as expected. If there are any irregularities, such as a delayed response, this may indicate a need for further troubleshooting.
- Battery Replacement for Remote Control: If the remote control for the plug switch operates on batteries, check and replace them as necessary to ensure uninterrupted service.
- Safe Storage: If the plug switch is not in use for an extended period, store it in a cool, dry place away from direct sunlight and heat sources.
- Electrical Contacts: Occasionally, the electrical contacts may need cleaning, especially if you notice any difficulty when plugging in the device. A contact cleaner can be used for this purpose, but make sure it’s designed for use with electronic components.
- Software Updates: If the plug switch can be controlled through an app and features firmware, ensure it is updated to the latest version. Software updates can fix bugs, improve performance, and enhance security.
- Monitor Load Capacity: Do not exceed the recommended electrical load specified by the manufacturer. Overloading the plug switch can cause overheating and might result in failure or a fire hazard.
Troubleshooting
Remote Control Not Operating the Plug
- Check Batteries: The most common issue with remote controls is dead batteries. Replace the batteries in the remote control and try again.
- Range Issues: Ensure you are within the operational range of the wireless remote. Obstacles between the remote and the plug can also cause signal issues.
- Interference: Other wireless devices may interfere with the signal. Try turning off nearby wireless devices to see if this resolves the issue.
- Pairing: The remote and plug might need to be re-paired. Consult the manual for the correct pairing procedure.
Plug Switch Not Responding to Remote Commands
- Power Supply: Ensure the plug switch is properly inserted into the wall outlet and that the outlet is supplying power.
- Overload Protection: If the plug switch has an overload protection feature, it may have been tripped. Try unplugging all devices, wait a few moments, and then plug them back in.
- Reset the Plug: Some models have a reset button on the side or front. Press the reset button to restore factory settings.
Device Plugged Into the Switch Does Not Turn On
- Check Device Power: Verify that the device itself is turned on and operational by plugging it directly into a wall outlet.
- Check Plug Switch: Ensure that the plug switch itself is turned on. Some models have a manual switch in addition to the remote control functionality.
Remote Has Limited Range or Intermittent Operation
- Reposition Plug: Move the plug to a different outlet that might have fewer obstructions between the plug and the remote.
- Environmental Factors: Materials like concrete, metal, or significant amounts of water (like large aquariums) can block or weaken the signal. Try to minimize such obstructions.
LED Indicator Issues
- Not Lighting Up: If there is an LED indicator that doesn’t light up when it’s supposed to, ensure that the power is on and that the device is not in a fault condition.
- Blinking LED: If the LED indicator is blinking in a pattern that suggests an error, consult the user manual to decode the blinking pattern and understand the specific issue.
FAQs
What is the TESSAN ES9939U Wireless Remote Control Plug Switch?
The TESSAN ES9939U is a wireless remote control plug switch that allows you to remotely turn on and off connected devices using a remote control.
Is the ES9939U plug switch compatible with voice assistants like Amazon Alexa or Google Assistant?
Yes, it is compatible with popular voice assistants such as Amazon Alexa and Google Assistant, enabling voice control of your connected devices.
How many devices can I control with this plug switch?
You can control up to three devices simultaneously with the ES9939U plug switch, making it convenient for various applications.
Can I schedule devices to turn on or off automatically with this plug switch?
Yes, you can create schedules and timers within the compatible app or remote control to automate the operation of your connected devices.
Is there a manual override option in case the remote control is lost or not working?
Yes, the ES9939U plug switch typically includes manual override buttons on the device, allowing you to control connected devices locally in case of remote control issues.
What is the maximum load capacity of the ES9939U plug switch?
The maximum load capacity may vary, but it is typically stated in watts (W) and indicates the total power devices connected to the plug can draw.
Is there a mobile app available for controlling the ES9939U plug switch?
Yes, you can download a compatible mobile app from the respective app store (iOS or Android) to control the ES9939U plug switch.
Does the plug switch have energy monitoring features?
Some models of plug switches offer energy monitoring capabilities, allowing you to track the energy consumption of connected devices through the app.
Can I set up multiple users to control the plug switch?
Yes, many plug switches support multiple user accounts, allowing different users to control the devices independently via the app or remote control.
Is there a warranty provided with the ES9939U Wireless Remote Control Plug Switch?
Warranty coverage may vary by the seller or manufacturer, but some packages include a limited warranty to ensure product quality and reliability.
Is the ES9939U plug switch compatible with 5GHz WiFi networks?
Typically, these plug switches operate on 2.4GHz networks, so ensure your router is broadcasting a 2.4GHz signal for proper functionality.
How do I troubleshoot common issues with the ES9939U plug switch?
If you encounter problems, refer to the user manual or contact the manufacturer's customer support for troubleshooting assistance and solutions.