fullwat LENNY-PAN-B4-B Touch Panel 4 ZONES Control Owner’s Manual

touch panel – 4 ZONES control
LENNY-PAN-B4 Smart LED control system
Owners manual

LENNY-PAN-B4-B Touch Panel 4 ZONES Control

New smart LED color control system with 2.4GHz remote control Auto synchronization and auto transmission functions.
The device adopts low power consumption technologies and one controller can manage several receivers at the same time.
The syster does not produce interference as it uses a very low level transmission signal Suitable for simple installations in both domestic and professional environments.

Technical specifications

Touch panel

Modelo| LENNY-PAN-B4
Voltaje| 3V (2 pilas AAA)*
Potencia de trasmision| 6dBm
Consumo de reposo| 20uA
Temperatura de trabajo| -10~40°C
Frecuencia de funcionamiento| 2.4GHz
Alcance aprox.| 30m

• Not included DIRECT CURRENT DRIVERS

| LENNY-DRV-LS2| LENNY-DRV- L5| LENNY-DRV-WL2P
---|---|---|---
Description| 5in 1 receiver| WIFi 5in 1 receiver| WiFi 2 in 1 receiver
Voltage| DC12V~24V (terminal block & jack plug inputs)
‘Output max. current| 6A per channel| 12A per channel
Total current| 15A| 12A
Working temperatue| -20~60°C| -10~40°C
Working frequency| 2.4GHz
Aprox. operational distance| 30m
Connection mode| Cormmon anode
Wil| Requires gateway LENNYWFOXT| Included

300W@240VAC
Regulation method| Wireless RF, push button, APP
RF range| 30m
Working temperature| -10-40°C
WIFI| Requires gateway LENNY-WIFOX1

WIFI GATEWAY

• Suggested AC/DC adaptors (not included): MWMU10GS
  FU-ADPY10-5-USB

SINGLE COLOR

Touch panel functions: LENNY-PAN-B4 ALL: All zones are switched on and can be confrolled
ALL O: Switching off all zones.
Note: Two zones contfrol at the same time is not possible, neither the other two ones. They must be controlled dll together (all 4) or each zone separately.
To activate a zone, click on the *|” symbol from zone number fo be controlled, To deactivate a zone, click on the “o” symbol from zone number fo be confrolled Zone number + |: Switching on of the zone and linking / unlinking of receivers.
Zone number + O: Switching off the zone.
Preloaded modes. To exit from preloaded mode, press the “White” button.
Brightness bar: White brightness adjustment.
Note: We need one driver at least per each zone we want to control.

Mobile control
For control via mobile phone, Alexa, Google Home or Google Assistant, a WIFI gateway is required, either built into the receiver or using the LENNY-WIFOX1 gateway.

TUNABLE WHITE

Touch panel functions: LENNY-PAN-B4

ALL : All zones are switched on and can be controlled.
ALL O: Switching off all zones.
Note: Iwo zones control at the same time is not possible, neither the other two ones. They must be controlled all together (all 4) or each zone separately.
To activate a zone, click on the “|” symbol from zone number to be controlled.
To deactivate a zone, click on the “o” symbol from zone number to be controlled.

Zone number + |: Switching on of the zone and linking / unlinking of receivers.
Zone number + O: Switching off the zone.
Preloaded modes. To exit from preloaded mode, press the “White” button,
Brightness bar: White brightness adjustment.
Dynamic white bar: Adjust Dynamic white from the warmest to the coolest level.
Note: We need one driver at least per each zone we want to control.

Mobile control
For control via mobile phone, Alexa, Google Home or Google Assistant, a WIFI gateway is required, either built into the receiver or using the LENNY-WIFOX1 gateway.

RGB

Touch panel functions: LENNY-PAN-B4

Working mode

• Select color: Touch color bar on desired color (e.g. blue).

• Color saturation: Adjust color saturation (0% chosen color, 100% very saturated color),

• Brightness bar: Adjust brightness level.

• White: With any color selected from color wheel, click on “W” to set full white with R+G+B mixing.

  • Brightness slide bar: White brightness level setting.
  • Tunable white: Once white activated, use “color “saturation bar” to set different white tones from RGB leds mixing.

• ON/OFF for ALL performances.

  • ON: Control and activation for all zones.
  • OFF: Fully disconnection.
    Note: It is not possible to control 2 zones at the same time and not the other 2 ones. They must be controlled either all together (all 4) or each one separately.

• To activate one zone, press “|” symbol from the zone number to be controlled.
  To deactivate one zone, press the “O” symbol from the zone number to be controlled.

Note: We need one driver at least per each zone we want to control.

Mobile control
For control via mobile phone, Alexa, Google Home or Google Assistant, a WIFI gateway is required, either built into the receiver or using the LENNY-WIFOX1 gateway.

Working mode

• Select color: Touch color wheel on desired color (e.g. blue).
• Saturation: Adjust color saturation (0% chosen color, 100% very saturated color).
• Brightness level: Adjust brightness level.
• White color: Bring out white color using R+G+B mixing combination (If maximum level is required, set saturation bar at highest level),
• Tunable white: System allows to simulate dynamic white levels using RGB leds.

RGBW

Touch panel functions: LENNY-PAN-B4

Working mode

• Select color: Touch color bar on desired color (e.g.blue).

• Brightness bar: Adjust brightness level.

• Only white activation: Click on “white” to reach pure white tone.

• Activate Colour + White: Choose colour with colour bar and adjust white with slide saturation bar (0% -downwards – white channel off, 100% – upwards – white channel on at  maximum).

  • Note: If brightness level was selected when “W” was activated then it will be switched on at that brightness selected level.

• Colour + White and colour removing: Press “White”.

• Colour + white and remove white: slide “white channel control” bar to 0% (to the left).

• Full ON/OFF

  • ON full activation: full Zones and control access.
  • Full OFF: All zones switch off.
    Note: It is not possible to control 2 zones at the same time and not the other 2 ones. They must be controlled either all together (all 4) or each one separately.

• To activate one zone, press the “|” symbol from the zone number to be controlled.
  To deactivate a zone, press the “O” symbol from the zone number to be controlled.

Note: We need one driver at least per each zone we want to control.

Mobile control
For control via mobile phone, Alexa, Google Home or Google Assistant, a WIFI gateway is required, either built into the receiver or using the LENNY-WIFOX1 gateway.

Working mode

• Select color: Touch color wheel on desired color (e.g. blue).
• “Saturation” bar: Adjust color saturation (0% chosen color, 100% very saturated color).
• Brightness level: Adjust brightness level.
• White light: Only white channel activation set.
  • The “Brightness slide bar” is used to set desired brightness level.
• Color + White activation: Choose color with “color slide wheel” and set white level with saturation bar (0% white channel off, 100% white channel set at max level).
• Color + tunable white and turn off white: We lower the saturation to 0%.
• Remove Color + white and Color levels: Press “White light”.

Touch panel functions: LENNY-PAN-B4

Working mode

• Select color: Touch color bar on desired color (e.g. blue).

• Brightness bar: Adjust brightness level.

• Dynamic white control: Press the “White” key (if there is a previous colour selected, it will be switched off). Move the “aynamic white” bar until the desired tone is achieved.

• Colour + White activation: Choose desired shade of white firstly (see previous point), Once we have chosen desired shade of white, we choose colour using the colour bar.

  • Colour + Dynamic white and white removing: slide“dynamic white” bar. 100% to the right (selected white tone will be turned ON to the maximum) and 0% to the left (the white will be turned off and only colour will remain).
  • Colour + Dynamic White and colour removing: press “White” key and adjust desired soft tone.

• FULL ON/OFF activation.

  • ON full activation: full Zones and control access.
  • Full OFF: All zones switch off.
    Note: It is not possible to control 2 zones at the same time and not the other 2 ones. They must be controlled either all together (all 4) or each one separately.

• To activate one zone, press the “|” symbol from the zone number to be controlled.
  To deactivate a zone, press the “O” symbol from the zone number to be controlled.

Note: We need one driver at least per each zone we want to control.

Mobile control
For control via mobile phone, Alexa, Google Home or Google Assistant, a WIFI gateway is required, either built into the receiver or using the LENNY-WIFOX1 gateway.

Working mode

• Select color: Touch color wheel on desired color (e.g.blue)
• Brightness level: Adjust brightness level.
• Tunable white: Slide your finger over “tunable white bar” to get desired white tone.
  • Note: If there is a previous selected level from color slide wheel, it will switch off.
• Color + Dynamic White: Choose desired color with slide wheel and adjust white tone desired with saturation bar (O% white channel off, 100% white channel at highest level).
  • Note: If dynamic white color is desired, please firstly set dynamic white mode.
• Color + dynamic white and turn white off: Set saturation bar at lowest level 0%.
• Color + dynamic white and color off: Select dynamic white tone with “Kelvin grade” bar and color will be switched off.

Led Strip-controller connection

Connection drawing
5 in 1 driver LENNY-DRV-LS2 / LENNY-DRV-WL5

“Switch” button can be used to indicate which type of product is being managed. To do so, press the “Switch” or “SET” button with a short touch until color from “indicator light” is required one.

| Single color| Tunable white| RGB| RGBW| RGBWW
---|---|---|---|---|---
Indicator light| | | | |

Press “SET” Continuously to switch between single color and tunable white mode.

LENNY-TRIAC1 Push button control

Functioning
Short press: Switches the connected device ON/OFF.
Long press (press and hold): increases or decreases the intensity of the light.

Connection
The maximum number of TRIACs is 25 pieces and maximum wiring distance from the push button is 20m.
To control everything with a single push button, LENNY-TRIACs must be connected in cascade according to the connection diagram.

List of LENNY-DRV-LS2 modes and functions for RGB / RGBW / RGBWW

List of LENNY-DRV-WL5 modes and functions for RGB / RGBW / RGBWW

Icon| Dynamic mode| Icon| Dynamic mode| Brightness / Saturation / Speed
---|---|---|---|---
| Rainbow| | Starlit night| Adjustable
| swam dancing| | Food
| Carnival| | Working
| Musical show| | Relaxing
| Disco| | Reading
| First love| | sunset
| Green forest| | Good night
| Tripopingly dancing| | Night light

System linking and unlinking

Note: The light only works after the controller is paired with one or more receivers.
Linking. Place Remote controller close to the desired driver to be paired.
Before starting linking process, configure receiver according to the type of LED strip. Refer to “wiring diagram” section (previous point) from the manual.

1. Switch off power supply and after 10 seconds, switch it on again.
   Note: For LENNY-DRV-WL2P or LENNY-TRIAC 1, press the SET button once to enter pairing mode.

2. Press ON button on the remote control 3 times within a maximum period of 3 sec.

3. The light will flash 3 times slowly to indicate successful pairing.

If light does not flash slowly, the bonding is not done.
Repeat the process until this occurs.

Unlinking

1. Switch off power supply and after 10 seconds, switch it on again.
   Note: For LENNY-DRV-WL2P or LENNY-TRIAC 1, press the SET button once to enter pairing mode.

2. Press ON button on the remote control 5 times within a maximum period of 3 sec.

3. The light will flash 10 times rapidly to indicate that unlinking is successful.

If light does not flash slowly, the bonding is not done.
Repeat the process until this occurs.

Attention

1. Please check if input voltage is compatible with voltage supported by the driver. Pay special attention not to cross positive and negative poles.
   Reversed connection will damage the controller.

2. Do not connect the cables while the Power supply is on. Turn if on when you are sure of connections are correct and there is no short circuit is possible.

3. Avoid placing driver controller in areas influenced by electromagnetic fields or close to devices that produce electromagnetic fields. Also, do not place driver controller in areas shielded by metal surfaces or where metal surfaces come between the control and the controller. This would affect operating distance effectiveness.

Device auto-sync

Different receiver drivers can be connected to operate with the same remote controller and operate in the same modes.

Notes:

1. : Self emitting indication.
2. Remote driver controllers can be paired with the same remote controller within a maximum range of 30 meters. (possible where as free or semi-free spaces and without foo many obstacles or walls).

Auto-transmitting function

A single remote controller may transmit control signals in succession to other driver controllers provided if maximum coverage distance of 30m is resected between them.

Installation diagram – LENNY-PAN-B4

1. Remove rear adhesive foil tape

2. Place bracket on the wall with your desired position.

3. Install 2 pcs AAA alkaline batteries.

4. Place main panel on the front of the bracket.

Installation diagram – LENNY-TRIAC 1

Mobile phone pairing

Download and install fhe application on your mobile phone:
a. Via QRI code
b. Searching the Play Store for “MiBoxer”, Satie

https://www.futlight.com/app/1.html

Note:
Also compatible with the application: SMART LIFE
To link our installation with our mobile phone, we will need one of these drivers:

• LENNY-DRV-WL5
• LENNY-DRV-WL2P
• LENNY-DRV-LS2 + LENNY-WIFOX1
• LENNY-TRIAC] + LENNY-WIFOX1

Register in MiBoxer:

We will receive an e-mail with a registration verification code, which we will have to enter in the application to finish registering account.
In order to use the application, we must activate GPS on our mobile phone (either Android or Apple).
Once on the main screen and our session started, we must add the device. To do this:

Select device model:

For model LENNY-DRV-WL5: Click on “Smart Strip Controller (WL5)”.
For model LENNY-DRV-WL2P: Click on “LED controller (FUTO35W-FUTO39W)”.
For model LENNY-DRV-LS2 or model LENNY-TRIAC 1: Click on “2.4GHz Gateway (WL-Box1)”.

For model LENNY-DRV-WL5: Disconnect power supply from LENNY-DRV-WL5 for 10 sec.
After 10 seconds, power the controller and within the first three seconds, press and hold “SET” button on the receiver until LED on the receiver flashes.
For models LENNY-DRV-WL2P / LENNY-DRV-LS2 / LENNY-TRIAC 1: Press SET button on device or on WIFI gateway for 3 seconds to activate WIFI signal.

In both cases, on the phone screen, click on “Ensure pilot lamp blinking”.

Enter network name and password.
Attention: only 2.4GHz network is supported (no 5G) and click on “Start configuration”,

A countdown will appear and once paired, if will indicate that pairing has been successful.
Our device will appear in the list of paired devices.

Wether we have to use the WIFI gateway (LENNY-WIFOX1):
We must link the driver to be controlled via the APP
To do this, click on 2.4GHz gateway.
First we must Choose whether we are going to configure one or more zones. In this case, as it is a zone, we enter the “change” section and select FUTO92/B4/T4,

On the screen of our mobile phone we will see image as follows:

Click on “Link/Unlink”.
Click on “link” to link and on “unlink” to unlink.
Remove the power supply to controller for 10 seconds.
After 10 seconds, power the controller and in the first 3 seconds, click on the mobile screen on “link” or “unlink”.
The light will flash three times and confirm correct linking.
In the case of unlink, light will flash 10 times for confirmation.

The application allows us to create groups with different receivers. This will allow us to control several receivers at the same time: turn ON / OFF / change the color, etc.

Once we have linked our receiver we can change our device name. This is interesting if we are going to control it with Alexa, Google Assistant or Google Home.
To do so, we press and hold name of the device on the screen and move it fo the left. We will see an “edit” and a “delete”. Click on “Edit”, change the name and “Ok”.

ALEXA linking

To control system with Alexa, a wifi gateway is required, either built into receiver or using LENNY-WIFOX1 gateway.
Install Alexa app and log in using your account.
We need to install Mi-Light Smart skill. To do so:

Once reached step as above, Alexa will detect our receiver automatically and we will be able to change its name, include it in a group or control it by voice.
If receiver is not detected automatically , we can push “detect devices” via Alexa app function.
Now you can work with standard ALEXA managing.

We can rename device to be able to control that device only instead the whole group, command Alexa to turn off/on the device, etc.

GOOGLE HOME linking

To control system with Google Home, a wifi gateway is required, either built into the receiver or using LENNY-WIFOX] gateway.
Install Google Home app and log in with your Google account. If you have not yet configured your home, you can do this now or later.
We need to install Mi-Light Smart skill. To do this:

Once we have reached this point, the linking is done.

GOOGLE ASSISTANT linking

To control system with Google Assistant, a wifi gateway is required, either built into the receiver or using LENNY-WIFOX1] gateway.
And Install Google Assistant application via PlayStore on your phone:

We must configure it to recognize your voice. Then enter “settings” in the application and click on “Voice Match”.
The application will ask you to repeat two phrases several times.
Once this is done, we will be able to “call” our device using “Ok Google”. For example, “Ok Google turn on Fullwat” and LED strips connected to Fullwat receiver will light uo properly.

Compatibility table

| Mop color| CCT| ROB| ROM| ROIVAM| “Mobile app Alexa Google Home”| Zones
---|---|---|---|---|---|---|---
LENNY-DRV-LS2 LEPOIVCOMSEI
5 in 1 Wifi receiver| LENWMD-083| UNNY4110-0115| | | | LENNY-WIFOX1 gateway is required| 1
LEW-MO-080| LENW4ICI-080| IBNYND-080| IENW4.0-060| UNW-MITSBO| 1
LENNY-MO-097| | | | | 1
LENNY-DRV-LS2
LENNY-DRV-LS2S
5 in 1 Wifi receiver| LENNY-MO-ON| LENW4.10-0128| LEW-WO-MI| LEW-NOON| LE8NYND-058| 1
LEW-PM-BO| UNW.PAN-BD| LEIN6BM80| LENNY-PM-80| LOW-PAN-BO| 1
LENWFM-10| LENW-PM-1(I| | | | 1
LEV/WO-007| LENNY4.0-007| | | | 4
LENW VDO92| LENWARD-092| LEMMA-092| LINNY4/0-092| LE78OD-092| 4
UNW-PAN44| LENWO.$14| IDOIY-PN4B4| IEBNY-PM114| LOMPAN84| 4
lEI.W VD-059| LEI.W-VD-089| LENNY MD C89| LINNY1.17.089| LENI,Y4.ID 089| 8
LINN( PAN-138| LENWPM-58| UMW-PAN-88| UNIVII-PM118| LENWPAN88| 8
LENNY-DRV-WL5
5 in 1 Wifi receiver| LE % W.VD-055| LEW,V0.088| | | | included| 1
LENW VD 080| LENW,I.00.080| LEMY-1.40113| LENVY4A3-053| LENNY-1.04:60| 1
LEW( MD-087| | | | | 1
LEW( VD-088| UNW4A-088| LENNIY-1/0-0138| LENW-1/0039| LENW-/ADO98| 1
LENWII/M80| LENW41M-E0| LEW-PM-BO| LENW-PM80| LENNY-FM-BO| 1
LENWPAN-KI| Ill4M,PAN-B1| | | | 1
LEW-MD-COT| LENW440-007| | | | 4
LEIN( MCI-092| LE/WIND-092| LE t4W4/0.092| LENNY4A.092| LENNYaID-092| 4
LENW-PAN454| ISON-PAN-84| LEN4Y-F1W84| LEION-PM-B4| IDINY-PM-134| 4
LENTIV VD 069| LENWAID.089| LIMNYN0089| LIMY-MOW| LENNY-AID-039| 8
LENW PA % 48| LENWPM 98| LEW-PAN-BB| IZMIT-M418| LENNY-PAN-el| 8
LENNY-DRV-WL2P
2 in 1 receiver with wifi and push button| LEMW VD083| LENWAID.088| | | | included| 1
UAW VD-08)| LEW/WO-080| | | | 1
LENW-MD-06 7| | | | | 1
LENTV.IVID-0841| LEA/WO-088| | | | 1
LINW-PAN80| LEIIWPAN- BD| | | | 1
LE/NY-MN-NI| LENW.PM-KI| | | | 1
LEAW-MID-1:0 7| UNWAIDC07| | | | 4
LENNY-MOM| LE7MYM:0-092| | | | 4
lei4RPANS4| LEtefffM4414| | | | 4
LENNY-POD-089| LENT/WO-089| | | | 8
UAW FM-88| LENWPM- 88| | | | 8
LENNY-TRIAC1 Drive TRIAC| LVOV-M-083| | | | | LENNY-WIFOX1 gateway is required| 1
LENW-MCI-080| | | | | 1
LEI00,610037| | | | | 1
LENW-IVCIO841| | | | | 1
UMW PAN80| | | | | 1
LENWF/M-NI| | | | | 1
LENNY-MD:07| | | | | 4
LENA/MID-092| | | | | 4
LENN14,1484| | | | | 4
UMW-ND-089| | | | | 8
LENW-II/M88| | | | | 8

Table of controls by zones

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>