ECHOMASTER P-BUA-TRANSIT-T Wiring Harness for Backup Alarm 2015-2021 Ford

Transit

P-BUA-TRANSIT-T
Wiring Harness for Backup Alarm 2015-2021 Ford Transit
INSTALLATION MANUAL

Thank you for purchasing the
P-BUA-TRANSIT-T

WHAT’S INCLUDED

• Vehicle Specific Wire Harness (P-BUA-TRANSIT-T)

COMPATIBLE ACCESSORIES

• 97dB Backup Alarm (BUA-97C)
• 97dB White Noise Backup Alarm (BUA-97WNC)

TOOLS REQUIRED

1. 10mm Nut-setter

2. 2 Phillips Bit

3. Impact Drill
4. Diagonal Cutters

• STEP 1:
  Locate the in-line trailer tow harness connector that is below the vehicle
  

• STEP 2:
  Unplug the OEM connector and install the P-BUA-TRANSIT-T harness between the OEM connectors
  Note: Vehicles without a trailer tow connector will be equipped with a sealed plug

  • Install the sealed plug onto the male end of the P-BUA-TRANSIT-T harness
    Vehicle that is not equipped with trailer tow wiring
    Vehicle that is equipped with trailer tow wiring

• STEP 3 :
  Use an impact drill and 10mm nut-setter to install a compatible backup alarm on the underside of the vehicle
  Note: (2) 10mm TEK screws are provided with the compatible backup alarm
  STEP 4:
  Use an impact drill and #2 Phillips bit to attach the P-BUA-TRANSIT-T ground ring to the vehicles chassis with a 1/2” self tapping fastener
  

• STEP 5:
  Plug the backup alarm connector into the mating connector on the P-BUA- TRANSIT-T harness. Secure any excess wiring with cable ties. Use diagonal cutters to remove excess cable tie material.

• STEP 6:
  Test the backup alarm

Phone – 866-766-2267
E-Mail – support@aampglobal.com

EchoMaster is a Power Brand of AAMP Global
EchoMaster.com

References

• EchoMaster – Aftermarket Vehicle Safety Products for Consumer and Commercial Drivers

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>